1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your LogiLink BP0146 Dual Monitor Wall Mount. This product is designed to securely mount two flat or curved monitors ranging from 17 to 32 inches, offering flexible positioning through its integrated gas spring mechanism. Please read this manual thoroughly before installation and retain it for future reference.
2. Informació de seguretat
- Ensure the wall structure can support the combined weight of the mount and two monitors (up to 9 kg per arm).
- No supereu la capacitat màxima de pes de 9 kg (19.8 lliures) per braç.
- Use appropriate mounting hardware for your specific wall type (wood stud, concrete, brick, etc.). Consult a professional if unsure.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
- Tighten all screws firmly but do not overtighten to avoid stripping threads.
- Regularly check the mount for any signs of wear or loose connections.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el vostre distribuïdor.
Image: Various components of the LogiLink BP0146 dual monitor wall mount.
El paquet normalment inclou:
- Placa de paret
- Gas Spring Monitor Arms (2 units)
- VESA Monitor Plates (2 units)
- Mounting Hardware Kit (screws, anchors, washers, Allen keys)
- Manual d'instruccions
4. Guia d'instal·lació
4.1. Eines necessàries
- Llapis
- Trepant
- Cercador de muntants (per a la instal·lació de muntants de fusta)
- Nivell
- Tornavís Phillips
- Socket Wrench (if applicable for lag bolts)
4.2. Wall Preparation and Wall Plate Installation
- Determine the desired mounting height for your monitors.
- Locate wall studs if mounting to wood, or ensure the concrete/brick wall is suitable.
- Position the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill holes with a pencil.
- Drill pilot holes according to the marked positions and wall type.
- Secure the wall plate to the wall using the provided screws and anchors (if necessary).
4.3. Arm Assembly and Monitor Attachment
Image: Monitor attached to the VESA plate on the arm.
- Attach the gas spring arms to the wall plate. Ensure they are securely fastened.
- Attach the VESA monitor plates to the back of your monitors using the appropriate screws from the hardware kit. The mount supports VESA patterns 75x75 mm and 100x100 mm.
- Carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting head. Ensure the monitor is securely locked in place.
4.4. Gestió de cables
Image: Integrated cable management on the monitor arm.
Route all monitor cables (power, video, etc.) through the integrated cable management channels on the arms. This helps maintain a tidy workspace and prevents cable damage.
5. Funcionament i ajust
Imatge: Lateral view of the monitor arm extended.
5.1. Ajust de la tensió de la molla de gas
The gas spring mechanism allows for smooth vertical adjustment. If the monitor sags or floats, adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height.
5.2. Tilt, Swivel, and Rotation
Image: Monitor arms fully extended, illustrating flexibility.
- Inclinació: The monitor can be tilted from -45° to +90° to reduce glare and optimize viewangles d'ajust.
- Girar: The arms allow for a swivel range of -90° to +90° at the wall plate and monitor connection points, enabling side-to-side movement.
- Rotació: The VESA plate allows for 360° rotation, enabling easy switching between landscape and portrait orientations.
- Extensió: The arms can extend from the wall between 90 mm and 540 mm, providing ample depth adjustment.
6. Manteniment
- Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats.
- Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius.
- No lubriqueu el mecanisme de la molla de gas.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Monitoritzar caigudes o descensos | La tensió de la molla de gas és massa baixa per al pes del monitor. | Increase gas spring tension by turning the adjustment screw clockwise. |
| Monitor floats up | La tensió de la molla de gas és massa alta per al pes del monitor. | Decrease gas spring tension by turning the adjustment screw counter-clockwise. |
| Monitor is not level | VESA plate or arm connection is not perfectly aligned. | Adjust the leveling screw on the VESA plate or re-align the monitor on the arm. |
| La muntura sembla inestable | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws. Ensure the wall can support the load. Consult a professional if needed. |
8. Especificacions
- Model: BP0146
- Marca: LogiLink
- Color: Negre
- Material: Alumini
- Tipus de muntatge: Muntatge de paret
- Number of Screens: 2
- Compatible Screen Size: 17 - 32 inches (flat and curved)
- Maximum Load Capacity per Arm: 9 kg (19.8 lliures)
- Compatibilitat VESA: 75x75 mm, 100x100 mm
- Distància a la paret (extensió): 90 - 540 mm
- Angle d'inclinació: -45° a +90°
- Angle de gir: -90° a +90°
- Rotació de pantalla: 360°
- Característiques especials: Gas Spring Mechanism, Integrated Cable Management
- País d'origen: Xina
9. Garantia i Suport
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local LogiLink distributor or retailer. Keep your proof of purchase for warranty claims.
