Manual d'usuari de la tira de LED Kolink Inspire L1 ARGB de 30 cm

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kolink Inspire L1 ARGB LED Strip. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Informació de seguretat

• Assegureu-vos que la font d'alimentació coincideixi amb el voltage requirements specified for the LED strip (230 Volts).
• Do not cut or modify the LED strip unless explicitly instructed, as this may damage the product and void the warranty.
• Avoid exposing the LED strip to extreme temperatures or direct moisture. This product is designed for indoor use.
• Mantenir fora de l'abast dels nens.
• Desconnecteu l'alimentació abans de netejar o realitzar qualsevol manteniment.

3. Contingut del paquet

The Kolink Inspire L1 ARGB LED Strip package includes:

• 1 x Kolink Inspire L1 ARGB LED Strip (30cm)

Note: Specific accessories such as a remote control or power adapter may be sold separately or integrated depending on the product variant. Refer to your product packaging for exact contents.

4. Configuració i instal·lació

4.1. Preparació

• Choose a clean, dry, and smooth surface for installation. Ensure the surface is free from dust, oil, or moisture.
• Unroll the LED strip carefully to avoid kinks or damage.

4.2. Passos d'instal·lació

1. Posicionament: Determine the desired placement for your LED strip. The strip is flexible and can be shaped to fit various contours.
2. Adhesió: If your strip includes an adhesive backing, carefully peel off the protective layer from a small section and press the strip firmly onto the prepared surface. Continue peeling and pressing along the length of the strip.
3. Connexió: Connect the LED strip's connector cable to a compatible ARGB controller or motherboard header. Ensure the connection is secure and correctly oriented to prevent damage. Refer to your ARGB controller or motherboard manual for specific connection details.
4. Potència: Connect the ARGB controller or motherboard to a suitable power supply. The LED strip operates at 230 Volts and 18 Watts.

Figure 1: An image showing the Kolink Inspire L1 ARGB LED Strip coiled, illuminated with a gradient of colors from purple to green, highlighting its multi-color capabilities. A connector cable is visible.

5. Funcionament

The Kolink Inspire L1 ARGB LED Strip is controlled via a compatible ARGB controller or motherboard software. The product specifications mention "Control Method: Remote", implying a remote control might be included or compatible. If a remote is provided, follow its specific instructions for operation.

• Encès/apagat: The LED strip will power on when the connected system or controller is powered on. Power off by shutting down the system or controller.
• Color and Mode Selection: Use your ARGB controller's software or the provided remote control (if applicable) to select desired colors, lighting effects, and brightness levels. The strip supports various RGB color options and dynamic lighting patterns.

6. Manteniment

6.1. Neteja

• Ensure the LED strip is disconnected from power before cleaning.
• Gently wipe the surface of the LED strip with a soft, dry, or slightly damp tela.
• Do not use harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the LEDs or the strip's coating.

6.2. Emmagatzematge

If storing the LED strip for an extended period, ensure it is clean, dry, and coiled loosely to prevent damage to the internal wiring. Store in a cool, dry place away from direct sunlight.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information or technical support, please refer to the official KOLINK weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.