Introducció
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your ELEGRP Decorator Double Rocker Light Switch, Model 72111-BL. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Informació de seguretat
- ADVERTIMENT: Per evitar incendis, descàrregues elèctrices o la mort, desconnecteu l'alimentació a l'interruptor o a la caixa de fusibles i comproveu que estigui apagada abans de connectar el cablejat.
- Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Use only copper or copper-clad wire. Do not use with aluminum wire.
- Assegureu-vos que totes les connexions dels cables estiguin segures.
- This device is UL and CUL Listed, ensuring compliance with safety standards.
Contingut del paquet
- 1 x ELEGRP Decorator Double Rocker Light Switch (Model 72111-BL)
- 1 x Matching Wall Plate
- Cargols de muntatge
Especificacions
| Número de model | 72111-BL |
| Mode d'operació | ON-OFF |
| Valoració actual | 15 Amps |
| Vol. Operatiutage | 120 Volts |
| Tipus de contacte | Normalment obert |
| Tipus de connector | Clamp |
| Terminal | Cargol |
| Tipus de circuit | 2 vies |
| Tipus d'actuador | Rocker |
| Material de contacte | Copper or Phosphor Bronze |
| Material | High-quality, impact-resistant polycarbonate thermoplastic and solid steel |
The ELEGRP Decorator Double Rocker Light Switch is designed for efficient space utilization, allowing two independent lighting controls within a single-gang wall box. Its compact design ensures easy fitting into standard junction boxes.
Image: Detailed dimensions of the ELEGRP Decorator Double Rocker Light Switch, showing its compact profile per a una fàcil instal·lació.
Instruccions d'instal·lació
- Apagueu l'alimentació: Locate the circuit breaker or fuse box that controls the power to the switch location. Turn off the power completely and verify it is off using a voltage provador.
- Treure l'interruptor antic: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting their connections (e.g., hot, neutral, ground, load).
- Prepareu els cables: Si cal, peleu aproximadament 1,25 cm d'aïllament dels extrems dels cables. Assegureu-vos que els cables estiguin rectes i sense osques.
- Wiring the New Switch: The ELEGRP Double Rocker Switch offers both side wiring and back wiring options. Refer to the diagram below for proper connections.
- Black Screw: Connect the Hot Wire (usually black).
- Brass Screw: Connect the White/Neutral Wire.
- Green Screw: Connect the Green/Ground Wire.
The switch features a self-grounding clip for automatic connection in a properly grounded metal wall box. For non-metallic boxes, ensure the ground wire is securely connected to the green screw.
Image: Wiring options for the ELEGRP Double Rocker Switch, illustrating both side wire and back wire connections for hot, neutral, and ground wires.
For applications requiring separate feeds for each rocker, the break-off fin between the two hot terminals can be removed. This allows each rocker to control a different circuit or load independently.
Image: Diagram showing wiring configurations for common feed (break-off tab intact) and separate feed (break-off tab removed) for the double rocker switch.
- Muntar l'interruptor: Carefully fold the wires into the electrical box. Insert the switch into the wall box and secure it with the provided mounting screws. The switch has break-off plaster ears for flush alignment.
- Instal·leu la placa de paret: Attach the included wall plate over the switch and secure it with the provided screws.
- Restaura l'alimentació: Turn the power back on at the circuit breaker or fuse box. Test the functionality of both rocker switches.
Instal·lació acabadaview Vídeo
Vídeo: Un overview of the ELEGRP Residential Grade Light Switch, demonstrating its design and potential installation context. This video provides a visual aid for understanding the product's features and general application.
Instruccions de funcionament
The ELEGRP Decorator Double Rocker Light Switch features two independent paddle switches. To operate, simply press the top or bottom of each paddle to toggle the connected light or device ON or OFF. Each paddle controls a separate circuit.
Image: The ELEGRP Double Rocker Switch installed in a bathroom, demonstrating its space-saving design by controlling two functions from a single location.
Manteniment
To maintain the appearance and functionality of your ELEGRP Decorator Double Rocker Light Switch:
- Netegeu la superfície amb un suau, damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Ensure the wall plate is securely fastened.
- Periodically check for any loose connections if issues arise (after turning off power).
Image: A visual representation of cleaning the glossy finish of an ELEGRP switch with a soft cloth, highlighting its easy-to-clean surface.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Light does not turn ON/OFF | No power to the switch; Loose wiring; Faulty bulb/fixture | Check circuit breaker; Verify wiring connections (power off); Test bulb/fixture |
| L'interruptor se sent solt | Els cargols de muntatge no estan ajustats | Estrenyeu bé els cargols de muntatge |
| Wall plate does not sit flush | Switch not properly aligned in wall box | Adjust switch position in wall box; Ensure break-off plaster ears are utilized if needed |
Garantia i Suport
ELEGRP products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official ELEGRP website. Please have your model number (72111-BL) available when contacting support.
