Pedrollo 3CRm80

Pedrollo 3CRm80 Multi-stagManual d'usuari de la bomba centrífuga d'aigua

Model: 3CRm80

1. Introducció

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo 3CRm80 Multi-stage Centrifugal Water Pump. Please read this manual thoroughly before installation and use, and retain it for future reference.

The Pedrollo 3CRm80 is a single-phase, multi-stage centrifugal pump designed for handling clean water and non-aggressive liquids. It is suitable for domestic applications such as water distribution in pressure systems and garden irrigation.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions personals i danys a la bomba:

3. Especificacions tècniques

CaracterísticaEspecificació
Model3CRm80
MarcaPedrollo
TipusMulti-stage Centrifugal Water Pump
Poder0.6 CV
Voltage110V or 220V AC, 60Hz (Single Phase)
Cap MàximFins a 120 peus (36.5 metres)
Caudal màximUp to 1260 GPH (4769 liters/hour)
Mida d'entrada/sortida1 polzades x 1 polzades
MaterialAcer inoxidable
Pes de l'article19 lliures (aprox. 8.6 kg)
Dimensions (paquet)18 x 12 x 8 polzades (aprox. 45.7 x 30.5 x 20.3 cm)
UPC722777873303
Pedrollo 3CRm80 Centrifugal Water Pump

Figura 1: Pedrollo 3CRm80 Multi-stage Centrifugal Water Pump. This image displays the pump's stainless steel body and blue motor housing.

Pedrollo 3CRm80 Performance Curve

Figura 2: Performance Curve for Pedrollo CR series pumps. This graph illustrates the relationship between pump head (in meters and feet) and flow rate (in l/min and US g.p.m.) for various models, including the 3CRm80.

4. Configuració i instal·lació

4.1 Ubicació

Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. Ensure sufficient space around the pump for ventilation and maintenance.

4.2 Connexió elèctrica

4.3 Connexió de fontaneria

4.4 Cebament de la bomba

Before initial operation, the pump must be primed. Remove the priming plug (usually located on the top of the pump casing) and fill the pump casing completely with clean water until it overflows. Replace the priming plug securely.

5. Instruccions de funcionament

  1. Ensure the pump is properly installed and primed.
  2. Verify all plumbing connections are secure and leak-free.
  3. Connect the pump to the appropriate electrical power supply.
  4. Turn on the power. The pump should start operating and begin to move water.
  5. Monitor the pump for any unusual noises or vibrations during initial operation.
  6. If the pump fails to deliver water after a short period, turn off the power, re-prime the pump, and check for any obstructions in the suction line.

Aplicacions

The Pedrollo 3CRm80 pump is suitable for:

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la bomba.

6.1 Comprovacions generals

6.2 Hivernització

If the pump is installed in an area subject to freezing temperatures, it must be drained to prevent damage:

  1. Desconnecteu l'alimentació de la bomba.
  2. Open any drain plugs on the pump casing and plumbing lines.
  3. Deixeu que tota l'aigua s'escorri completament.
  4. Store the pump in a warm, dry place if possible, or ensure it is thoroughly drained and protected from freezing.

7. Solució De Problemes

ProblemaCausa possibleSolució
La bomba no arrencaNo power; tripped circuit breaker; motor thermal overload activated.Check power supply; reset circuit breaker; allow motor to cool down.
La bomba funciona però no subministra aiguaPump not primed; air leak in suction line; clogged suction strainer; insufficient water supply.Re-prime the pump; check suction line connections; clean strainer; ensure adequate water source.
Flux o pressió reduïtsPartial blockage in plumbing; worn impeller; air in system.Inspect and clear plumbing; consult a qualified technician for impeller inspection; re-prime.
Excés de soroll o vibracióCavitation (air in pump); loose mounting; foreign object in pump.Ensure pump is fully primed and suction is clear; tighten mounting bolts; disconnect power and inspect pump for obstructions (consult technician if unsure).

8. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized Pedrollo dealer. Keep your purchase receipt as proof of purchase.

Protection plans may be available for extended coverage. Please check with your retailer for details on 3-Year or 4-Year protection plans.

Manufacturer: Pedrollo

UPC: 722777873303

Documents relacionats - 3CRm80

Preview Pedrollo Sèrie UP Multi-stagBombes submergibles: rendiment, especificacions i instal·lació
Informació detallada sobre els multi-s de la sèrie Pedrollo UPtagBombes submergibles, incloent-hi el rang de rendiment, els límits d'aplicació, els detalls de construcció, les corbes característiques, les dimensions i les pautes d'instal·lació. Ideals per a ús domèstic, civil i agrícola.
Preview Dispositiu de control automàtic Pedrollo PRESFLO MULTI: especificacions tècniques
Especificacions tècniques detallades, guia d'instal·lació i característiques del dispositiu electrònic automàtic de control de pressió Pedrollo PRESFLO MULTI per al subministrament d'aigua domèstica i l'augment de pressió.
Preview Bombes d'aigua submergibles automàtiques Pedrollo TOP MULTI-TECH i TOP MULTI-EVOTECH: manual d'instruccions
Aquest document proporciona una guia operativa per als submergibles automàtics multifuncionals Pedrollo TOP MULTI-TECH i TOP MULTI-EVOTECH.tagbombes d'aigua e. Cobreix informació general, funcionament, proteccions i consells típics d'instal·lació.
Preview Manual d'operació de la bomba d'aigua submergible automàtica Pedrollo TOP MULTI-TECH / TOP MULTI-EVOTECH
Aquest document proporciona instruccions operatives per als submergibles automàtics multifuncionals Pedrollo TOP MULTI-TECH i TOP MULTI-EVOTECH.tagbombes d'aigua e. Cobreix informació general, principis de funcionament, consells d'instal·lació i funcions de protecció per a un rendiment i una longevitat òptims.
Preview Bombes submergibles automàtiques Pedrollo TOP MULTI-TECH: especificacions i rendiment
Especificacions tècniques detallades, corbes de rendiment, guia d'instal·lació i característiques de la sèrie de multifuncionals Pedrollo TOP MULTI-TECHtagBombes submergibles automàtiques, dissenyades per a aplicacions d'aigua neta.
Preview Bombes centrífugues Pedrollo sèrie TURBO: especificacions tècniques, rendiment i aplicacions
Especificacions tècniques detallades, corbes de rendiment, dimensions i informació d'aplicació per a la sèrie Pedrollo TURBO de dos cilindres.tage centrifugal electric pumps, designed for clean water applications in domestic, civil, agricultural, and industrial sectors.