Manual d'instruccions del seient de cotxe reclinable 3 en 1 Graco TriRide

Informació important de seguretat

Always read and understand all instructions and warnings in this manual before using your Graco TriRide 3-in-1 Car Seat. Failure to follow these instructions can result in serious injury or death.

• Mai place a rear-facing child seat on a front seat with an active airbag.
• Sempre secure your child in the harness system, even for short trips.
• Mai leave your child unattended in the car seat.
• No ho facis use accessories or parts not supplied by Graco.
• This car seat is Graco ProtectPlus Engineered™ to help protect in frontal, side, rear, and rollover crashes.

Image: Graco ProtectPlus Engineered™ for comprehensive crash protection.

Producte acabatview

The Graco TriRide 3-in-1 Car Seat is designed to grow with your child, offering three modes of use for extended safety and comfort.

Image: The Graco TriRide 3-in-1 Reclining Car Seat, Clybourne.

Característiques principals:

• Disseny 3 en 1: Transitions from rear-facing harness (5-40 lb) to forward-facing harness (26.5-65 lb) to highback booster (40-100 lb).
• No-Rethread Simply Safe Adjust™ Harness System: Allows simultaneous adjustment of headrest and harness height in one motion.
• 10-Position Adjustable Headrest: Ensures a secure and comfortable fit as your child grows.
• Reclinació de 6 posicions: Provides comfort for your child and aids in proper installation.
• LATCH-Equipped: For easy and secure installation.
• Emmagatzematge integrat de l'arnès: Keeps harness safely stored when in booster mode.
• Dual Cup Holders: Conveniently keeps drinks and snacks accessible.
• Coixí del seient rentable a màquina: Per a una fàcil neteja i manteniment.
• Marc reforçat amb acer: Proporciona força i durabilitat.

Image: The three versatile modes of use for the TriRide car seat.

Imatge: Detallada view of the Graco TriRide car seat's key components and features.

Configuració i instal·lació

Proper installation is critical for your child's safety. Always refer to the detailed instructions and diagrams provided in the full product manual for your specific vehicle model. The easy-to-read level indicator helps ensure correct installation angles.

Image: The 6-position recline feature for comfort and proper installation.

Rear-Facing Harness Mode (5-40 lb)

For infants and toddlers weighing 5-40 lb and up to 49 inches tall. The child's head must be at least 1 inch below the top of the car seat's headrest.

• Position the car seat rear-facing on the vehicle seat.
• Adjust the recline position using the 6-position recline feature to ensure the level indicator is entirely within the blue zone.
• Secure the car seat using either the vehicle's LATCH system or the vehicle's seat belt, following the belt path indicated for rear-facing installation.
• Ensure the car seat is tightly secured and does not move more than 1 inch side-to-side or front-to-back at the belt path.

Forward-Facing Harness Mode (26.5-65 lb)

For toddlers and preschoolers weighing 26.5-65 lb and up to 49 inches tall.

• Position the car seat forward-facing on the vehicle seat.
• Adjust the recline position as needed for comfort and proper fit.
• Secure the car seat using either the vehicle's LATCH system or the vehicle's seat belt, following the belt path indicated for forward-facing installation.
• Attach and tighten the top tether strap to the vehicle's top tether anchor point.

Mode elevador de respatller alt (40-100 lb)

For older children weighing 40-100 lb and 43-57 inches tall.

• Remove the harness system and store it in the integrated harness storage compartment.
• Position the booster seat on the vehicle seat.
• Guide the vehicle's lap and shoulder belt through the open-loop belt guides, ensuring the shoulder belt is properly positioned across the child's shoulder and the lap belt is low on the hips.

Instruccions de funcionament

Adjusting Headrest & Harness

The No-Rethread Simply Safe Adjust™ Harness System allows you to adjust the height of the headrest and harness straps simultaneously. Simply squeeze the adjustment handle at the top of the headrest and slide it up or down to the desired position. Ensure the harness straps are at or just below the child's shoulders for rear-facing, and at or just above the child's shoulders for forward-facing.

Image: Adjusting the No-Rethread Simply Safe Adjust™ Harness System.

Posicions de reclinació

The car seat features 6 recline positions. To adjust, locate the recline lever at the front of the car seat base, lift the lever, and tilt the seat to the desired position. Ensure the seat clicks securely into place.

Harness Storage

When transitioning to highback booster mode, the harness straps can be conveniently stored in the integrated compartment within the car seat, eliminating the need to remove them entirely.

Portavasos

The two integrated cup holders are designed to keep your child's drinks and snacks within easy reach. They are removable for cleaning.

Manteniment i cura

Regular cleaning and maintenance will ensure the longevity and hygiene of your car seat.

• Coixí de seient: El coixí del seient es pot rentar a màquina. Consulteu les instruccions de cura. tag on the fabric for specific washing instructions. Typically, use cold water on a delicate cycle and air dry.
• Corretges d'arnès: Netegeu les corretges de l'arnès amb anuncisamp tela. No renteu a màquina ni submergiu-ho en aigua, ja que això pot debilitar les corretges.
• Sivella: Netegeu la sivella netejant-la amb anunciamp drap. No utilitzeu detergents ni lubricants.
• Peces de plàstic i metall: Wipe plastic and metal parts with mild soap and cool water.

Resolució de problemes

• Dificultat per estrènyer l'arnès: Ensure the harness straps are not twisted and are routed correctly through the appropriate slots. Check that the chest clip is at armpit level.
• Car Seat Not Level (Rear-Facing): Re-adjust the recline position using the recline lever until the level indicator bubble is entirely within the blue zone. You may need to adjust the vehicle seatback or use a rolled towel/pool noodle under the base if permitted by your vehicle and car seat manuals.
• Instal·lació solta: Ensure the LATCH connectors or vehicle seat belt are pulled as tight as possible. Press down firmly on the car seat while tightening to remove slack. The car seat should not move more than 1 inch side-to-side or front-to-back at the belt path.

Especificacions

Garantia i suport

For detailed warranty information, product registration, and customer support, please refer to the official Graco weblloc web o poseu-vos en contacte directament amb el servei d'atenció al client de Graco. Conserveu el rebut de compra per a reclamacions de garantia.

Recursos en línia: Visita www.gracobaby.com for FAQs, video tutorials, and replacement parts.