X-PRO 150cc Moped Street Gas Scooter User Manual

1. Introducció

This manual provides essential instructions for the safe assembly, operation, maintenance, and troubleshooting of your X-PRO 150cc Moped Street Gas Scooter, Model Fiji 150 (X20). Please read this manual thoroughly before operating the scooter to ensure proper use and to prevent injury or damage.

Nota important: The Manufacturer Statement of Origin (MSO) and Bill of Sale paperwork will be sent separately. These documents are crucial for registration and legal ownership.

Residents de Califòrnia: This scooter cannot be sold or registered in California due to state-specific regulations.

Advertències de seguretat

• Always wear a helmet and appropriate safety gear when operating the scooter.
• Familiarize yourself with all local traffic laws and regulations before riding.
• Perform pre-ride inspections as outlined in the maintenance section.
• No feu servir el patinet sota els efectes de l'alcohol o les drogues.
• Ensure all assembly steps are completed correctly and all fasteners are tightened before first use.

2. Components and Packaging

Your X-PRO 150cc Moped is shipped partially disassembled in a protective crate. Upon receipt, inspect the packaging for any signs of damage. The main components requiring assembly are listed below.

Figure 2.1: The X-PRO 150cc Moped as received in its shipping crate, indicating partial assembly.

Included Components for Assembly:

• Amortidor posterior
• Muntatge del manillar
• Roda davantera
• Brake Components (specific to front wheel)
• Hub Odometer Counter
• Bateria
• Various fasteners and small parts

3. Muntatge i configuració inicial

Assembly of the X-PRO 150cc Moped requires basic mechanical skills. If you are not comfortable performing the assembly yourself, it is highly recommended to seek assistance from a qualified mechanic.

El muntatge s'acabaview:

1. Desembalatge: Carefully remove the scooter and all components from the shipping crate. Retain all packaging materials until assembly is complete and the scooter is confirmed to be in working order.
2. Instal·lació del manillar: Attach the handlebar assembly securely. Ensure all cables and hoses are routed correctly and not pinched.
3. Front Wheel and Brake Installation: Install the front wheel, ensuring the brake components (disc/drum) and hub odometer counter are correctly aligned and secured.
4. Instal·lació de l'amortidor posterior: Mount the rear shock absorber(s) as per the detailed instructions.
5. Instal·lació de la bateria: Install the battery, ensuring correct polarity. Connect the positive (+) terminal first, then the negative (-) terminal.
6. Controls de fluids: Verify engine oil levels and add fuel. The scooter is shipped without fuel.
7. Inspecció prèvia a la marxa: Before the first start, perform a thorough inspection of all assembled parts, checking for tightness of fasteners, proper cable routing, and fluid levels.

For detailed visual guidance, please refer to the official X-PRO assembly video (if available). A link to this video would typically be provided by the manufacturer or seller.

Initial Engine Start and Break-in Period

After assembly and adding fuel, the engine may require several attempts to start as the fuel system primes. Do not continuously crank the engine for extended periods to avoid damage to the starter. If the engine does not start, try holding the throttle open at different positions while cranking briefly.

A critical break-in period of approximately 300 kilometers (186 miles) is required for new engines. During this period, avoid high speeds, rapid acceleration, and prolonged full-throttle operation. Following the break-in procedure outlined in the full owner's manual is essential for engine longevity and optimal performance.

4. Instruccions de funcionament

The X-PRO 150cc Moped is equipped with a reliable 4-stroke, air-cooled engine and an automatic drivetrain for ease of use.

Controls acabatsview:

• Encesa: Key-operated ignition switch.
• Acceleració: Twist grip on the right handlebar for acceleration.
• Frens: Front disc brake and rear drum brake, operated by levers on the handlebars.
• Llums: Headlight, taillight, turn signals, and brake light controls.
• Trompa: Button-operated horn.
• Miralls: Adjustable rearview mirrors for visibility.

Figura 4.1: Frontal esquerre view of the X-PRO 150cc Moped, showing handlebar and front wheel.

Arrencada del motor:

1. Ensure the scooter is on its center stand.
2. Introduïu la clau al contacte i gireu-la a la posició "ON".
3. Apply the brake lever (typically the left lever for the rear brake).
4. Press the electric start button. If the engine does not start immediately, release the button, wait a few seconds, and try again. If still no start, try applying slight throttle while pressing the start button.

Anant amb el patinet:

Once the engine is running, release the center stand. Gently twist the throttle to accelerate. The automatic transmission will manage gear changes. Use the brake levers to slow down and stop. Always maintain a safe distance from other vehicles and be aware of your surroundings.

Figura 4.2: lateral view of the X-PRO 150cc Moped, illustrating its overall design.

5. Manteniment

Regular maintenance is crucial for the safety, performance, and longevity of your X-PRO 150cc Moped. Refer to the complete owner's manual for a detailed maintenance schedule.

Comprovacions rutinàries:

• Pressió dels pneumàtics: Check tire pressure before each ride. Refer to the tire sidewall for recommended pressures.
• Frens: Inspect brake fluid levels (if applicable) and check for proper brake lever free play and effectiveness.
• Lights and Signals: Verify all lights (headlight, taillight, brake light) and turn signals are functioning correctly.
• Oli de motor: Check engine oil level regularly and change according to the maintenance schedule.
• Elements de fixació: Comproveu periòdicament que totes les femelles, els cargols i els elements de fixació estiguin ben ajustats.
• Filtre d'aire: Inspect and clean or replace the air filter as needed.

Break-in Period Maintenance:

The initial 300 km (186 miles) break-in period is vital. An oil change is typically recommended after this period to remove any manufacturing debris from the engine. Consult your full owner's manual for specific break-in maintenance requirements.

Figura 5.1: Part posterior dreta view of the X-PRO 150cc Moped, highlighting the exhaust and rear wheel.

6. Solució De Problemes

This section addresses common issues you might encounter with your X-PRO 150cc Moped. For more complex problems, contact X-PRO customer support or a qualified technician.

7. Especificacions

8. Garantia i atenció al client

X-PRO is committed to providing quality products and reliable customer support. For specific warranty details, please refer to the documentation included with your purchase or contact X-PRO directly.

Suport postvenda:

XPROUSA maintains a stock of aftermarket parts for the vehicles they sell, ensuring support for repairs and replacements. If you encounter issues, require replacement parts, or need technical assistance, please contact XPROUSA customer service.

When contacting support, please have your model name (Fiji 150), manufacturer part number (X20), and purchase details readily available.

For more information or to contact support, visit the official X-PRO store or weblloc: X-PRO Store on Amazon