1. Introducció
Thank you for choosing the Hbada J301 Ergonomic Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.
The Hbada J301 office chair is designed for comfort and support during extended periods of sitting. Key features include adjustable lumbar support, flip-up armrests for space-saving, seat height adjustment, 360-degree swivel, and a rocking function.
2. Informació de seguretat
- Assegureu-vos que tots els components estiguin ben subjectats abans d'utilitzar-los.
- No us atureu a la cadira.
- Do not use the chair on uneven surfaces.
- Mantingueu les mans i els peus allunyats de les peces mòbils durant l'ajust.
- Maximum static load capacity is approximately 120 kg (265 lbs). Do not exceed this limit.
- Keep children away from the chair during assembly and adjustment.
3. Contingut del paquet
Si us plau, verifiqueu que hi hagi totes les peces abans de començar el muntatge. Si falta alguna peça o hi ha alguna danyada, poseu-vos en contacte amb el servei d'atenció al client.
- Muntatge del respatller
- Seat Cushion Assembly with Armrests
- Cilindre d'elevació de gas
- Base (5-star nylon base)
- Casters (5x PU casters)
- Placa de mecanisme
- Kit de ferramenta (cargols, volanderes, clau Allen)
4. Muntatge i muntatge
Follow these steps to assemble your Hbada J301 office chair. Assembly typically takes 15-30 minutes.
- Fixeu les rodes a la base: Insert each of the five casters into the holes at the end of the chair base arms. Push firmly until they click into place.
- Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base muntada.
- Fixeu la placa del mecanisme al seient: Alineeu la placa del mecanisme amb els forats pretallats a la part inferior del coixí del seient. Fixeu-la amb els cargols i la clau Allen proporcionats. Assegureu-vos que la part frontal del mecanisme estigui orientada cap a la part frontal del seient.
- Fixar el respatller al seient: Connect the backrest to the seat assembly. Secure it with the appropriate screws.
- Connecteu el conjunt del seient a l'elevador de gas: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
Figura 1: Chair Dimensions. This image illustrates the overall dimensions of the Hbada J301 chair, including height, width, and depth, from both front and side perspectives, aiding in space planning and fit.
5. Instruccions de funcionament
5.1. Ajust d'alçada del seient
Per ajustar l'alçada del seient, localitzeu la palanca al costat dret, sota el seient. Mentre esteu asseguts, estireu la palanca cap amunt per baixar el seient. Per aixecar el seient, aixequeu-vos lleugerament i estireu la palanca cap amunt. Deixeu anar la palanca a l'alçada desitjada.
5.2. Ajust de suport lumbar
The chair features an adjustable lumbar support. The butterfly-shaped lumbar pillow gently supports your waist. The lumbar support can be adjusted vertically by approximately 5 cm to match your back's curve.
Figura 2: Lumbar Support Adjustment. This image highlights the adjustable lumbar support system, showing its vertical adjustment range and the mesh material for breathability.
5.3. Reposabraços abatibles
The armrests can be flipped up to allow the chair to be pushed closer to a desk, saving space. Simply lift the armrests upwards until they lock into a vertical position. To return them to the horizontal position, pull them down.
Figura 3: Flip-Up Armrests for Space Saving. This image demonstrates how the chair's armrests can be rotated upwards, allowing the chair to be neatly tucked under a desk, optimizing space in smaller rooms.
5.4. Funció de balanceig
The chair features a rocking function with an approximate 15-degree recline. To activate, pull out the lever on the left side, beneath the seat. Push the lever in to lock the chair in an upright position. The tension of the rocking mechanism can be adjusted by rotating the round knob located under the seat.
Figura 4: Rocking Function and Tension Adjustment. This image illustrates the chair's rocking capability, showing the lever used to engage/disengage the function and the knob for adjusting the recline tension.
5.5. 360-Degree Swivel
The chair seat and backrest assembly can rotate 360 degrees, providing flexibility and ease of movement in your workspace.
6. Manteniment
6.1. Neteja
- Mesh Backrest and Seat: Esborra amb anunciamp drap i sabó suau. Eviteu els productes químics durs.
- Base and Armrests: Netejar amb un suau, damp tela.
- Rodes: Regularly check casters for accumulated hair, dust, or debris. Remove any obstructions to ensure smooth rolling.
6.2. Atenció general
- Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
- Avoid exposing the chair to direct sunlight for prolonged periods to prevent material degradation.
- Do not use abrasive cleaners or tools that could scratch the chair's surfaces.
7. Solució De Problemes
If you encounter any issues with your Hbada J301 chair, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Chair does not roll smoothly | Casters are dirty or obstructed. | Clean casters, removing any hair or debris. |
| L'ajust d'alçada del seient no funciona | Gas lift lever is stuck or damaged; gas lift cylinder malfunction. | Check if the lever is fully engaged. If the issue persists, contact customer support for gas lift replacement. |
| La cadira sembla inestable o trontolla | Cargols solts o muntatge desigual. | Revisa i estreny tots els cargols de muntatge. Assegura't que la cadira estigui sobre una superfície plana. |
| Rocking function is too stiff or too loose | Rocking tension knob needs adjustment. | Rotate the tension adjustment knob under the seat to increase or decrease resistance. |
8. Especificacions
- Model: J301 (HDNY163GM/JP)
- Dimensions (L x P x A): 60 cm x 60 cm x 100-110 cm
- Interval d'alçada del seient: 46 cm - 56 cm
- Pes: Aproximadament 12 kg
- Capacitat de càrrega estàtica: Aproximadament 120 kg
- Materials: Breathable mesh, high-density urethane foam, reinforced nylon base, silent PU casters
- Reposabraços: Disseny abatible
- Funció reclinable: Approximately 15-degree rocking
Figura 5: Chair Material Breakdown. This image details the high-quality materials used in the chair's construction, such as the TUV-5 certified gas lift, durable nylon base, and silent PU casters, ensuring safety and comfort.
9. Garantia i Suport
The Hbada J301 office chair comes with a 3 any de garantia on the product body, covering repair or replacement for manufacturing defects. This warranty is provided free of charge.
For customer support, warranty claims, or inquiries, please contact your retailer or the Hbada customer service team through the official weblloc web o informació de contacte proporcionada en el moment de la compra.
Si us plau, conserveu el comprovant de compra per validar la garantia.
