1. Introducció
Thank you for choosing the FLASHFORGE Foto 6.0 Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new 3D printer. Please read this manual thoroughly before using the printer to ensure safe and optimal performance.
Image: The FLASHFORGE Foto 6.0 Resin 3D Printer, showcasing its compact design and transparent cover.
The Foto 6.0 features a 6-inch 2K monochrome LCD screen, providing high resolution and faster printing speeds. Its robust design and user-friendly interface make it suitable for both beginners and experienced users in resin 3D printing.
2. Informació de seguretat
Observeu sempre les precaucions de seguretat següents:
- Wear appropriate personal protective equipment (PPE), including gloves and safety glasses, when handling resin.
- Work in a well-ventilated area to avoid inhaling resin fumes.
- Mantingueu la impressora allunyada de la llum solar directa i de fonts de calor.
- Do not touch the LCD screen with sharp objects.
- Ensure the power supply is correctly connected and grounded.
- Mantenir fora de l'abast dels nens i mascotes.
3. Contingut de l'embalatge
Verifiqueu que tots els elements siguin presents al paquet:
Image: A visual representation of all items included in the FLASHFORGE Foto 6.0 package, such as the printer, power adapter, USB drive, tools, and safety gear.
- FLASHFORGE Foto 6.0 3D Printer
- Construeix la placa
- Tina de resina
- Adaptador d'alimentació i cable
- USB Drive (with software and test files)
- Rascador
- Raspador de metall
- Conjunt de claus hexagonals
- Embut
- Guants
- Manual d'usuari (aquest document)
4. Configuració
4.1 Desembalatge i col·locació
Carefully remove the printer from its packaging. Place the printer on a stable, level surface in a well-ventilated room, away from direct sunlight and dust.
4.2 Build Plate Leveling
Accurate leveling of the build plate is crucial for successful prints.
- Loosen the screws on the build plate arm.
- Place a piece of A4 paper on the LCD screen.
- Lower the build plate until it gently presses against the paper.
- Apply even pressure to the build plate and tighten the screws.
- Raise the build plate and remove the paper.
4.3 Resin Vat Installation
Carefully place the resin vat into its designated slot on the printer, ensuring it is seated correctly and securely.
4.4 Connexió d'alimentació
Connect the power adapter to the printer and then plug it into a suitable power outlet. Turn on the printer using the power switch.
5. Funcionament
5.1 Software Installation and Slicing
Install the FlashPrint slicing software from the provided USB drive or download the latest version from the official FLASHFORGE website. This software allows you to prepare your 3D models for printing.
Image: The FLASHFORGE Foto 6.0 printer alongside a computer displaying the slicing software interface, demonstrating the two slicing software options and wide resin compatibility.
Import your 3D model (STL format is supported) into the software. Adjust settings such as layer height, exposure time, and supports as needed. Once configured, slice the model and save the print file a la vostra unitat USB.
5.2 Pouring Resin
Carefully pour the resin into the resin vat. Ensure the resin level does not exceed the maximum fill line indicated on the vat.
Imatge: Primer pla view of the resin vat showing the maximum fill level and an exploded view of the integrated FEP film design, highlighting its easy replacement process.
5.3 Inici d'una impressió
- Inseriu la unitat USB al port USB de la impressora.
- On the printer's touch screen, navigate to the print menu.
- Seleccioneu la impressió desitjada file des de la unitat USB.
- Confirm the print settings and start the printing process.
5.4 Monitoring and Post-Processing
Monitor the print progress through the transparent cover. Once printing is complete, carefully remove the build plate. Use the provided scraper to detach the printed model. Clean the model with isopropyl alcohol (IPA) and cure it under UV light for optimal strength.
Image: A visual representation of the FLASHFORGE Foto 6.0's build volume, showing dimensions of 130mm x 78mm x 155mm with a printed model inside.
6. Manteniment
6.1 Cleaning the Build Plate and Resin Vat
After each print, clean the build plate with IPA. If there is cured resin in the vat, carefully remove it. For thorough cleaning, empty the resin vat and clean it with IPA. Ensure no cured resin particles remain on the FEP film or LCD screen.
6.2 Replacing FEP Film
The FEP film is a consumable part and may need replacement if it becomes cloudy or damaged. Refer to the integrated FEP film design for easy replacement. Typically, you will need to loosen 12 screws to replace the film.
6.3 Neteja de la pantalla LCD
Gently wipe the LCD screen with a soft, lint-free cloth and a small amount of screen cleaner or IPA. Avoid abrasive materials or excessive pressure.
6.4 Resin Handling and Storage
Store resin in its original opaque bottle in a cool, dark place, away from direct sunlight. Do not return used resin from the vat to the original bottle unless filtered.
Image: A diagram illustrating the effective heat dissipation system of the FLASHFORGE Foto 6.0, showing airflow and internal fans designed to maintain optimal operating temperature and extend component lifespan.
7. Solució De Problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| Print fails to adhere to build plate | Build plate not leveled; insufficient bottom exposure time; cold resin; dirty build plate | Re-level build plate; increase bottom exposure time in slicer; warm resin to room temperature; clean build plate thoroughly |
| Parts detach from supports | Supports too thin or too few; insufficient exposure time | Add more/thicker supports; increase normal exposure time |
| Layer lines visible or uneven surfaces | Z-axis wobble; insufficient anti-aliasing; incorrect exposure | Check Z-axis stability; enable/adjust anti-aliasing in slicer; calibrate exposure time |
| Printer not recognized by computer/USB | Corrupt USB drive; incompatible file format | Format USB drive (FAT32); ensure file is .fdg format; try a different USB port/drive |
For more complex issues, refer to the official FLASHFORGE support resources.
8. Especificacions
| Característica | Detall |
|---|---|
| Model | Foto 6.0 |
| Tecnologia d'impressió | LCD-SLA (Resin 3D Printer) |
| Volum de construcció | 130 x 78 x 155 mm (5.1 x 3.07 x 6.1 polzades) |
| Pantalla LCD | 6-inch Monochrome 2K (2560x1620 pixels) |
| Resolució XY | 50 µm |
| Precisió de l'eix Z | 0.00125 mm |
| Gruix de la capa | 0.025-0.1 mm |
| Velocitat d'impressió | Up to 50 mm/h |
| Font de llum | 405nm UV Integrated Light |
| Connectivitat | USB |
| Admet File Format | STL |
| Dimensions del producte | 9.06 x 7.87 x 16.14 polzades |
| Pes de l'article | 18.41 lliures |
Image: The FLASHFORGE Foto 6.0 printer with its overall dimensions clearly marked, indicating its height and width.
9. Garantia i Suport
FLASHFORGE products come with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. Keep your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or spare parts, please visit the official FLASHFORGE website or contact their customer service directly. You can often find FAQs, video tutorials, and community forums on their support pages.
