1. Producte acabatview
The SINOTIMER TM630S-2 is a versatile 7-day weekly digital programmable timer switch designed for automatic control of various electrical equipment. It features a high-accuracy CMOS chip, strong anti-jamming capabilities, and is simple to set up and operate. This timer is ideal for applications such as controlling streetlights, neon signs, water heaters, air conditioners, and agricultural facilities.
Figura 1.1: Davant view of the SINOTIMER TM630S-2 Digital Programmable Timer Switch, showing the LCD display and control buttons.
Característiques principals:
- 24 Hours / 7 Days Programmable: Allows for flexible scheduling throughout the week.
- Bateria incorporada: Retains memory settings during power failures.
- Auto Time Error Correction: Automatically corrects time by +/- 30 seconds weekly.
- Múltiples programes: Supports up to 16 ON/OFF settings per day or week.
- Control manual: Ability to manually override programmed settings.
- Aplicació àmplia: Suitable for controlling various electrical appliances and systems.
2. Instal·lació i cablejat
Important: Installation should only be performed by a qualified electrician to ensure safety and proper functionality. Disconnect power before installation.
Muntatge:
The TM630S-2 is designed for DIN-Rail mounting. Ensure a secure fit in your electrical panel or enclosure.
Diagrama de cablejat:
Refer to the diagram below for correct wiring connections. The timer has input terminals for power supply and output terminals for controlling the connected appliance.
Figura 2.1: Wiring diagram and dimensions of the TM630S-2. Connect the power source to the 'INPUT' terminals (L for Live, N for Neutral) and the appliance to be controlled to the 'OUTPUT' terminals (L for Live, N for Neutral).
- Entrada d'alimentació: Connect the main power supply (12VDC or 220VAC, depending on your model) to the terminals labeled "INPUT" (L and N).
- Appliance Output: Connect the electrical appliance you wish to control to the terminals labeled "OUTPUT" (L and N). The timer acts as a switch for the live (L) line.
- Connexions segures: Assegureu-vos que totes les connexions dels cables estiguin ben ajustades i segures per evitar contactes solts i possibles perills.
3. Instruccions de funcionament
Familiarize yourself with the buttons on the timer: Setmana, H+, M+, S+, Rellotge, Temporitzador, C/R (Cancel/Recall), and Manual.
3.1. Initial Setup / Reset
En el primer ús o després d'un apagada prolongadatage, the display may be blank. The built-in battery will maintain settings, but a full reset might be needed if the unit behaves unexpectedly.
- Restabliment complet: Press the recessed C button (usually located near the 'Week' button) with a pointed object (e.g., a pen tip) to clear all settings and reset the timer to factory defaults.
3.2. Configuració de l'hora actual
- Manteniu premut el botó Rellotge botó.
- Mentre aguanta Rellotge, premeu Setmana per configurar el dia actual de la setmana.
- Mentre aguanta Rellotge, premeu H+ per configurar l'hora actual.
- Mentre aguanta Rellotge, premeu M+ per configurar el minut actual.
- Mentre aguanta Rellotge, premeu S+ to set the current second.
- Allibera el Rellotge botó per estalviar temps.
3.3. Programació d'esdeveniments d'activació/desactivació
The TM630S-2 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.
- Premeu el botó Temporitzador premeu el botó una vegada. La pantalla mostrarà "1 ON".
- Premeu Setmana to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations like MO-FR, SA-SU, MO-SA, etc.).
- Premeu H+ to set the hour for the "1 ON" event.
- Premeu M+ to set the minute for the "1 ON" event.
- Premeu S+ to set the second for the "1 ON" event.
- Premeu el botó Temporitzador de nou. La pantalla mostrarà "1 OFF".
- Repeat steps 2-5 to set the day(s), hour, minute, and second for the "1 OFF" event.
- Continueu pressionant el botó Temporitzador button to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
- To exit programming mode and save settings, press the Rellotge botó.
Note: If you do not need all 16 programs, simply press Rellotge to exit after setting your desired programs.
3.4. Anul·lació manual
El Manual button allows you to temporarily override the programmed settings.
- Premeu Manual repeatedly to cycle through different modes:
- ACTIVITAT: The output is continuously ON, ignoring programmed OFF times.
- AUTO ON: The output is currently ON, and will follow programmed OFF times.
- DESACTIVAT: The output is continuously OFF, ignoring programmed ON times.
- APAGAT AUTOMÀTIC: The output is currently OFF, and will follow programmed ON times.
- Select "AUTO ON" or "AUTO OFF" to return to automatic operation based on your programmed schedule.
3.5. Cancel/Recall Program
El C/R button is used to cancel or recall a specific program.
- While in programming mode (after pressing Temporitzador), navigate to the specific program you wish to cancel.
- Premeu C/R to cancel the current ON/OFF setting. The display will show "--:--".
- Premeu C/R again to recall the setting.
4. Manteniment
The SINOTIMER TM630S-2 is designed for low maintenance. Follow these guidelines to ensure its longevity:
- Neteja: Use a soft, dry cloth to clean the exterior of the timer. Do not use abrasive cleaners or solvents.
- Medi ambient: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust or moisture.
- Bateria interna: The timer has a built-in rechargeable battery to maintain settings during power outages. This battery is not user-replaceable.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc. | No power supply; internal battery fully discharged. | Check power connections. Allow unit to charge for a few minutes after connecting to power. Perform a full reset if necessary. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings; manual override active; incorrect current time. | Verify program settings (ON/OFF times, days). Check the manual override mode (ensure it's in "AUTO ON" or "AUTO OFF"). Re-set the current time. |
| Time display is inaccurate. | Initial time not set correctly. | Re-set the current time accurately. The timer has auto-correction, but initial setting is crucial. |
| Els botons no responen. | Error temporal de programari. | Perform a full reset using the recessed 'C' button. If the issue persists, contact customer support. |
6. Especificacions tècniques
| Marca | SINOTIMER |
| Model | TM630S-2 |
| Color | Blanc |
| Interval de temperatura | -20 °C a +50 °C |
| Font d'alimentació | 12VDC / 220VAC (optional, specific to purchased model) |
| Consum d'energia | 4.5 VA (MAX) |
| Mostra | LCD |
| Contacte de commutació | 1 interruptor de canvi |
| Programes | 16 ON/OFF settings each day or week |
| Histèresi | 2 sec/day (at 25°C) |
| Interval mínim | 1 segon |
| Capacitat | 30A 250V AC |
| Black-out Memory | 60 dies |
| Interval del temporitzador | 1 segon a 168 hores |
| Recarrega la bateria | 3V |
| Error mitjà | 1s/24h (at 25°C) |
Dimensions:
Refer to Figure 2.1 in the Installation section for detailed dimensions (e.g., 95mm height, 98mm overall height, 24mm width per module, 36.5mm DIN-Rail mounted).
7. Contingut del paquet
The package for the SINOTIMER TM630S-2 Digital Programmable Timer Switch typically includes:
- 1 x SINOTIMER TM630S-2 Timer Switch
Note: Additional accessories or documentation may vary by retailer or region.
8. Assistència i garantia
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.
While the provided product information did not specify a detailed warranty period, standard consumer electronics typically come with a limited warranty against manufacturing defects. Please consult the product packaging or your point of purchase for specific warranty terms and conditions.
