Introducció
This manual provides comprehensive instructions for the use and maintenance of your original Krups Dolce Gusto Mini Me capsule holder. Designed for specific Krups Dolce Gusto Mini Me coffee machine models (KP1208 and KP123 series), this component is essential for brewing your favorite beverages. Please read this manual carefully to ensure proper installation, operation, and longevity of your capsule holder.
Configuració
1. Desembalatge
- Carefully remove the capsule holder from its packaging.
- Inspect the component for any signs of damage. If damaged, do not use and contact your supplier.
2. Instal·lació
Before installation, ensure your coffee machine is unplugged and cool.
- Locate the capsule holder slot on your Krups Dolce Gusto Mini Me coffee machine. This is typically found at the front of the machine where capsules are inserted.
- Align the capsule holder with the slot. The handle part should face outwards.
- Gently slide the capsule holder into the machine until it clicks securely into place. Do not force it.
- Once installed, the machine is ready for use.
Image showing the Krups Dolce Gusto Mini Me capsule holder. It is a black, square-shaped component with a circular recess for the capsule and a curved handle for insertion into the coffee machine.
Instruccions de funcionament
1. Inserting a Capsule
- Pull the capsule holder out from the coffee machine.
- Place a single Dolce Gusto capsule into the circular recess of the holder. Ensure it sits flat and securely.
- Slide the capsule holder back into the machine until it clicks.
2. Elaboració de cervesa
- Follow your coffee machine's specific instructions for selecting beverage type and volume.
- Initiate the brewing process. The capsule holder will securely hold the capsule during extraction.
3. Removing a Used Capsule
- After brewing is complete and the machine has stopped, pull the capsule holder out.
- Carefully remove the used capsule. Be aware that the capsule may still be hot.
- Dispose of the used capsule according to local waste disposal guidelines.
Manteniment
1. Neteja
- Regularly clean the capsule holder to prevent residue buildup and ensure optimal performance.
- Remove the capsule holder from the machine.
- Wash the holder with warm, soapy water. Use a soft sponge or cloth.
- Esbandiu bé amb aigua corrent.
- Allow the holder to air dry completely before reinserting it into the machine.
- Do not use abrasive cleaners or scouring pads, as these can damage the surface.
2. Emmagatzematge
- When not in use for extended periods, store the capsule holder in a clean, dry place.
- Ensure it is free from dust and direct sunlight.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Capsule holder does not slide in smoothly. | Desalineació o obstrucció. | Ensure the holder is correctly aligned with the machine's slot. Check for any coffee grounds or debris obstructing the path. |
| Capsule does not fit properly. | Incorrect capsule type or improper placement. | Ensure you are using genuine Dolce Gusto capsules. Verify the capsule is seated flat in the holder. |
| Water leakage around the capsule holder. | Holder not fully inserted or damaged seal (on machine). | Push the capsule holder firmly until it clicks. If leakage persists, the issue might be with the machine's internal seals, requiring professional service. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Krups |
| Pes de l'article | 70 g |
| Fabricant | Krups |
| ASIN | B0979FNW4H |
| Primera data disponible | 16 de maig de 2021 |
| Models compatibles | Krups Dolce Gusto Mini Me KP1208, KP123 series (e.g., KP120810, KP120831, KP120840, KP120865, KP120866, KP120H10, KP120H31, KP120H65, KP120H66, KP120HCH, KP123B10, KP123B31, KP123B40, KP123BCH, PJ120854, PJ120855, PJ120H54, PJ120H55, Moulinex PV1208, PV120858, PV120859) |
Garantia i Suport
This capsule holder is an original Krups replacement part. For specific warranty information regarding this component, please refer to the original purchase documentation or contact the seller directly. General product warranty terms are typically provided by the manufacturer, Krups.
For technical support or further inquiries, please visit the official Krups website or contact their customer service department. You can also refer to the user manual of your specific Krups Dolce Gusto Mini Me coffee machine for comprehensive troubleshooting and maintenance guides.
Del fabricant Weblloc: www.krups.com
