Tork Matic Hand Towel Roll Dispenser with Intuition Sensor (Model 461202) Instruction Manual

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of your Tork Matic Hand Towel Roll Dispenser with Intuition Sensor, Model 461202. This touch-free dispenser is designed for hygienic, one-at-a-time dispensing of hand towels, suitable for various commercial environments.

The dispenser features an Intuition Sensor for automatic towel delivery, an LED refill indicator, and adjustable sheet length settings to optimize towel consumption. It is ADA Compliant and designed for use with Tork H1 roll towels.

2. Informació important de seguretat

Si us plau, llegiu atentament totes les instruccions abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.

• Ensure the dispenser is securely mounted to a stable surface to prevent injury or damage.
• Use only the specified battery type (3 x C alkaline batteries). Do not mix old and new batteries, or different types of batteries.
• Mantingueu les mans allunyades de les peces mòbils durant el funcionament i el manteniment.
• Do not immerse the dispenser in water or expose it to excessive moisture.
• This dispenser is intended for use with Tork H1 roll towels only. Use of other refills may impair performance and void warranty.
• Per netejar, utilitzeu un suau, damp drap. Eviteu productes de neteja o dissolvents abrasius.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Tork Matic® Hand Towel Dispenser - with Intuition™ Sensor
• Installation hardware (screws, anchors)
• Key for smart lock (if applicable)
• Manual d'instruccions

4. Configuració i instal·lació

4.1 Muntatge a la paret

The dispenser is designed for easy wall mounting. Ensure the installation surface is level and capable of supporting the dispenser's weight when full.

1. Choose a suitable location, ensuring adequate clearance for operation and maintenance.
2. Open the dispenser cover using the provided key or by pressing the release button (if keyless).
3. Mark the drilling points on the wall using the dispenser's mounting holes as a template.
4. Perfora forats i insereix els ancoratges de paret adequats.
5. Secure the dispenser to the wall using the provided screws.
6. Tanqueu la tapa del dispensador.

4.2 Instal·lació de la bateria

The dispenser requires three (3) C alkaline batteries for operation.

1. Obriu la tapa del dispensador.
2. Locate the battery compartment, typically on the inside back panel.
3. Insert three new C alkaline batteries, ensuring correct polarity (+/-).
4. Tanqueu la tapa del compartiment de la bateria.

4.3 Loading Paper Towels

This dispenser is compatible with Tork H1 roll towels.

1. Obriu la tapa del dispensador.
2. Place the new Tork H1 roll towel onto the internal spindle, ensuring it rotates freely.
3. Feed the leading edge of the towel into the dispensing mechanism as indicated by internal guides.
4. Ensure the towel is properly engaged and a small portion is visible at the dispensing opening.
5. Tanqueu la tapa del dispensador.

Figure 4.3: Illustration of paper towel roll loading.

4.4 Adjusting Sheet Length

The dispenser allows for adjustable sheet lengths to optimize consumption. Available lengths are typically 10, 12, 14, or 18 inches.

1. Obriu la tapa del dispensador.
2. Locate the sheet length adjustment mechanism, usually a switch or dial inside the dispenser.
3. Select the desired sheet length.
4. Tanqueu la tapa del dispensador.

Figura 4.4: Intern view highlighting adjustable sheet length and other features.

5. Instruccions de funcionament

5.1 Touch-Free Dispensing

The Tork Matic dispenser utilizes an Intuition Sensor for automatic, touch-free operation.

1. Place your hand in front of the sensor located on the front of the dispenser.
2. The dispenser will automatically present a single sheet of towel.
3. Take the dispensed towel. The sensor will reset for the next use.

Figure 5.1: Touch-free dispensing in action.

5.2 LED Refill Indicator

The dispenser is equipped with an LED indicator to signal when a refill is needed.

• A solid green light indicates sufficient towel supply.
• A flashing yellow or red light indicates that the towel roll is low and requires replacement soon.
• A solid red light indicates the towel roll is empty or batteries are low.

6. Manteniment

6.1 Neteja

Regular cleaning helps maintain hygiene and optimal performance.

1. Obriu la tapa del dispensador.
2. Wipe down all surfaces, including the sensor area, with a soft, damp tela.
3. For stubborn marks, use a mild, non-abrasive cleaning solution. Avoid harsh chemicals or solvents.
4. Ensure all surfaces are dry before closing the cover.

6.2 Refilling

When the LED indicator signals a low towel supply, replace the roll as described in Section 4.3.

Figura 6.2: Examples of compatible Tork H1 roll towels.

7. Solució De Problemes

8. Especificacions

Figure 8.1: Dispenser dimensions.

9. Garantia i Suport

This Tork dispenser comes with a 5-year extended warranty. Registration is required for eligibility.

Per al registre de la garantia i més assistència, visiteu el lloc web oficial de Tork. weblloc:

torkusa.com/garantia

Figure 9.1: Warranty information.