Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Introducció

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Informació de seguretat

• Desconnecteu sempre l'alimentació de la presa de corrent abans d'instal·lar o treure qualsevol component.
• Manipuleu tots els components amb cura per evitar danys causats per l'electricitat estàtica. Penseu en la possibilitat de fer servir una corretja antiestàtica per al canell.
• Be cautious of sharp edges inside the case.
• Mantingueu les peces petites i els cargols fora de l'abast dels nens.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Caixa d'accessoris (que conté cargols, separadors, brides per a cables, etc.)
• Manual d'usuari (aquest document)

4. Producte acabatview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Característiques principals:

• Suport de la placa base: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Refrigeració: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Filtració de pols: Equipped with a magnetic anti-dust mesh on the top panel.
• Emmagatzematge: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Panells laterals: Tempered glass side panels for an aesthetic view de components interns.

Figura 4.1: Part frontal view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Figura 4.2: De dalt a baix view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Configuració i instal·lació

5.1 Extracció dels panells laterals

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Instal·lació de la placa base

1. Instal·leu la placa d'E/S que venia amb la placa base a l'obertura posterior de la carcassa.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Fixeu la placa base amb els cargols adequats de la caixa d'accessoris.

5.3 Instal·lació de la unitat d'alimentació (PSU).

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Instal·lació de la unitat d'emmagatzematge

• Discs durs de 3.5 polzades: Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• SSD de 2.5 polzades: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Targeta gràfica i targetes d'expansió

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Gestió de cables

Aprofita els retalls de cables i els punts d'amarratge que hi ha darrere de la safata de la placa base per gestionar els cables. Això millora la circulació del flux i l'estètica.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Instruccions de funcionament

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Figura 6.1: Primer pla view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Manteniment

• Neteja del filtre de pols: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Neteja general: Utilitzeu un suau, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Eliminació de pols interna: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. Solució De Problemes

8.1 L'ordinador no s'encén

• Assegureu-vos que el cable d'alimentació estigui connectat correctament tant a la font d'alimentació com a la presa de corrent.
• Check that the PSU switch is in the 'ON' position.
• Verifiqueu que el cable de l'interruptor d'alimentació del panell frontal estigui connectat correctament a la placa base.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Problemes de sobreescalfament

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Netegeu els filtres de pols i els components interns regularment.
• Verifiqueu que el refrigerador de la CPU i els ventiladors de la GPU funcionin correctament.

9. Especificacions

10. Garantia i Suport

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.