SSK M.2 NVMe SSD Enclosure (Model HE-C327)
Manual d'instruccions
Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SSK M.2 NVMe SSD Enclosure, Model HE-C327. This enclosure is designed for M.2 NVMe PCIe M Key SSDs of sizes 2230, 2242, 2260, and 2280. It offers high-speed data transfer up to 10Gbps via USB 3.2 Gen 2 and features a tool-free design for easy assembly.
Nota important: This enclosure is no compatible with B Key, B+M Key SATA SSDs, M.2 PCIe AHCI SSDs, mSATA SSDs, or non-M.2 form factor SSDs. Ensure your SSD is an M.2 NVMe PCIe M Key type before installation.
Image: The SSK M.2 NVMe SSD Enclosure, silver-grey in color, shown with its two included USB cables (USB-C to USB-C and USB-C to USB-A).
Contingut del paquet
- SSK M.2 NVMe SSD Enclosure (Model HE-C327)
- Cable USB-C a USB-C
- Cable USB-C a USB-A
- Thermal Pads (2x)
Configuració i instal·lació
Segueix aquests passos per instal·lar el teu SSD NVMe M.2 a la carcassa:
- Obriu el recinte: Gently slide the enclosure open to remove the internal tray.
- Inseriu l'SSD: Carefully insert your M.2 NVMe SSD into the PCB slot at a 45-degree angle. Ensure the M-Key notch aligns correctly.
- Assegureu l'SSD: Gently push the SSD down until it is flat. Insert the fixing screw (Screw A) into the slot at the end of the M.2 SSD and tighten it to secure the SSD. Ensure the screw is properly seated in the groove to avoid obstruction.
- Aplicar coixinet tèrmic: Place a thermal pad onto the installed SSD. Remove the protective film from both sides of the thermal pad. This aids in heat dissipation.
- Tanca el recinte: Align the internal tray with the enclosure shell and slide it back in the direction of the arrow until it clicks into place, indicating it is locked.
Image: A hand sliding the silver enclosure cover to reveal the internal tray.
Image: An M.2 NVMe SSD being inserted into the internal PCB at an angle.
Image: A small screw being inserted to hold the M.2 SSD in place on the PCB.
Image: A thermal pad being placed on top of the installed M.2 SSD.
Image: The internal tray with the SSD and thermal pad being slid back into the enclosure shell.
Image: A diagram illustrating the supported M.2 NVMe SSD sizes: 2230, 2242, 2260, and 2280.
Instruccions de funcionament
The SSK M.2 NVMe SSD Enclosure is plug-and-play, requiring no additional drivers for most operating systems.
- Connexió: Connect the enclosure to your computer using one of the provided USB cables (USB-C to USB-C or USB-C to USB-A). The enclosure is bus-powered and does not require an external power supply.
- Llum indicadora: A blue indicator light will illuminate when the device is plugged in. It will blink during data transfer, indicating activity.
- Compatibilitat: The enclosure is compatible with Windows 7/8/8.1/10, Linux, and Mac OS.
Image: The SSK enclosure connected to a laptop, with icons representing Windows, Mac OS, Linux, and Android compatibility.
Image: A close-up of the enclosure highlighting the blue indicator light and its aluminum construction for heat dissipation.
Manteniment
- Mantingueu la carcassa neta i sense pols. Feu servir un drap suau i sec per netejar-la.
- Eviteu exposar el dispositiu a temperatures o humitat extremes.
- Handle the enclosure and installed SSD with care to prevent physical damage.
- L'alumini casing is designed for optimal heat dissipation. It is normal for the enclosure to become warm during extended use, especially during high-speed data transfers.
Image: A chart displaying temperature measurements of the enclosure and SSD over a 30-minute period, demonstrating effective temperature control.
Resolució de problemes
- SSD no detectat: If a newly installed SSD is not detected by your computer, it may need to be initialized, partitioned, and formatted. Access Disk Management (Windows) or Disk Utility (Mac OS) to perform these actions. For compatibility across both Mac and Windows operating systems, format the SSD to EXFAT.
- Velocitats de transferència lentes: Ensure you are connecting the enclosure to a USB 3.2 Gen 2 (10Gbps) compatible port on your computer. Older USB ports (e.g., USB 2.0, USB 3.0/3.1 Gen 1) will result in lower transfer speeds. Verify your SSD is an NVMe PCIe M Key type, as SATA SSDs are not supported and will not function.
- Incompatible SSD: This enclosure supports M.2 NVMe PCIe M Key SSDs only. It does not support B Key, B+M Key SATA SSDs, M.2 PCIe AHCI SSDs, mSATA SSDs, or non-M.2 form factor SSDs. It is also not compatible with original MacBook SSDs.
- Enclosure Not Opening/Closing Smoothly: Ensure no internal components are obstructing the sliding mechanism. Check that the SSD is properly secured and the screw is not protruding.
Image: A visual guide distinguishing between supported M.2 NVMe PCIe M Key SSDs and unsupported B Key, B+M Key SATA, and other M.2 types.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | HE-C327 |
| Material | Alumini |
| Compatible SSD Type | M.2 NVMe PCIe M Key SSDs only |
| Mides SSD compatibles | 2230, 2242, 2260, 2280 |
| Capacitat màxima d'emmagatzematge | Fins a 4 TB |
| Interfície del maquinari | USB 3.2 Gen 2 (USB-C) |
| Velocitat de transferència de dades | Fins a 10 Gbps |
| Controller IC Chipset | JMS583 |
| Característiques | UASP, Trim, Tool-Free Design |
| Sistemes operatius compatibles | Windows 7/8/8.1/10, Linux, Mac OS |
| Dimensions del producte | 4.53 x 1.54 x 0.43 polzades |
| Pes de l'article | 0.08 quilograms (2.82 unces) |
Garantia i Suport
For product support or inquiries, please refer to the contact information provided with your purchase or visit the official SSK weblloc web. Els detalls específics de la garantia poden variar segons la regió i el distribuïdor.
