Manual d'instruccions del ratolí de joc amb cable ultralleuger XTRFY MZ1 de Zy's Rail Edition

1. Producte acabatview

The XTRFY MZ1 is an ultra-light wired gaming mouse designed for optimal aim and performance. Developed in collaboration with gaming expert Zy “Rocket Jump Ninja” Rykoa, it features a unique shape, high-quality components, and customizable RGB lighting.

Figure 1: XTRFY MZ1 Gaming Mouse, top-down view with RGB lighting active.

2. Configuració

2.1 Connexió del ratolí

1. Connect the USB cable from the XTRFY MZ1 mouse to an available USB port on your computer.
2. The mouse is plug-and-play and does not require additional software for basic functionality.

2.2 Inspecció inicial

Upon connecting, the mouse's RGB lighting should activate, indicating it is receiving power. Ensure the PTFE gliding surfaces on the bottom of the mouse are free from debris for optimal movement.

Figure 2: Underside of the XTRFY MZ1 mouse, highlighting the PTFE feet and sensor area.

3. Instruccions de funcionament

3.1 Funcions bàsiques

• Clic esquerre: Botó d'acció principal.
• Clic dret: Botó d'acció secundària.
• Roda de desplaçament: Used for vertical scrolling and as a clickable button.
• Botons laterals: Two programmable buttons located on the left side of the mouse.

3.2 On-Mouse Settings Adjustment

The XTRFY MZ1 allows for direct adjustment of key settings without the need for software. All adjustments are made using buttons on the mouse, typically located on the underside or top.

• CPI (Counts Per Inch) Adjustment: Adjust mouse sensitivity. Multiple levels are available, indicated by LED colors.
• Ajust de la taxa de sondeig: Change the frequency at which the mouse reports its position to the computer (e.g., 125 Hz, 500 Hz, 1000 Hz).
• Lift-Off Distance (LOD) Adjustment: Customize the height at which the sensor stops tracking when the mouse is lifted.
• Control d'il·luminació RGB: Cycle through individual colors, various LED effects, adjust brightness, or switch lighting off entirely.

Figura 3: Detallada view of the mouse underside, showing buttons for CPI, polling rate, LOD, and RGB adjustments.

3.3 Unique Shape and Grip

The Zy’s Rail Edition features a unique shape with a slim grip width, low button height, high back, slight curves on the sides, and comfortable grooved buttons. This design is intended to provide optimum aim and a stable grip, particularly for fingertip grip styles.

Figura 4: Pro lateralfile of the XTRFY MZ1, showcasing its distinct ergonomic contours.

3.4 Vídeo oficial del producte

4. Manteniment

4.1 Neteja

• Desconnecteu el ratolí de l'ordinador abans de netejar-lo.
• Feu servir un drap suau i sec per netejar la superfície del ratolí.
• Per a la brutícia tossuda, lleugerament dampNetegeu el drap amb aigua o una solució de neteja suau. Eviteu productes químics agressius.
• Use compressed air to clear dust from crevices and the sensor area.

4.2 Cura del cable

Avoid sharp bends or excessive pulling on the mouse cable to prevent damage. Store the cable neatly when not in use.

5. Solució De Problemes

• El ratolí no respon: Ensure the USB cable is securely connected to your computer. Try a different USB port.
• Seguiment inconsistent: Clean the optical sensor on the underside of the mouse. Ensure your mouse pad surface is clean and suitable for optical tracking.
• La il·luminació RGB no funciona: Check the on-mouse RGB settings to ensure it hasn't been turned off or set to a very low brightness.
• Configuració no aplicable: Refer to the quick start guide for specific button combinations to adjust CPI, polling rate, and LOD. Ensure you are pressing the correct buttons for the desired change.

6. Especificacions

7. Garantia i Suport

For warranty information and technical support, please refer to the official Xtrfy website or contact their customer service directly. Details regarding product registration and warranty claims can typically be found in the product packaging or on the manufacturer's support pages.