Introducció
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Què hi ha a la caixa
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- Control remot x 1
- Instruction Manual (Japanese) x 1
Informació de seguretat
- Aquest producte està dissenyat per només per a ús interiorNo l'exposeu a l'aigua ni a una humitat elevada.
- Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
- Mantenir fora de l'abast dels nens.
- If any part of the product is damaged, discontinue use immediately and contact support.
Configuració
Segueix aquests passos per a una instal·lació correcta de la teva tira de llums LED:
- Prepara la superfície: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Mesurar i tallar (opcional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Nota: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Aplicar la tira: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Connectar components: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Encès: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Instruccions de funcionament
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Funcions de control remot:
- Encès/apagat: Premeu el botó botó d'engegada vermell per encendre o apagar els llums.
- Ajust de brillantor: Utilitza el botons de fletxa amunt i avall (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Selecció de color: Trieu entre 20 colors preestablerts by pressing the corresponding color buttons.
- Modes de bricolatge: El Botons DIY1-DIY6 allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Modes dinàmics:
- RÀPID/LENT: Ajusta la velocitat dels modes dinàmics.
- AUTOMÀTIC: Cycles through all dynamic modes automatically.
- FLASH: Parpelleja a través dels colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: S'esvaeix entre 3 o 7 colors.
Manteniment
- Neteja: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Emmagatzematge: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Cura de l'adhesiu: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La tira LED no s'il·lumina. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. La pila del comandament a distància està morta. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| El comandament a distància no respon. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. La pila del comandament a distància està morta. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Substituïu la bateria del comandament a distància. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Especificacions
- Número de model: PR410082-RGB-JP
- Marca: Lepros
- Tipus de font de llum: LED (SMD5050)
- Quantitat de LED: 150 LEDs (30 LEDs per meter)
- Longitud de la tira: 5 metres
- Consum d'energia: 18W
- Entrada Voltage: DC12V 1.5A
- Opcions de color: RGB (20 preset colors + DIY modes)
- Mètode de control: 44-key IR Remote Control
- Ús interior / exterior: Interior
- Característiques especials: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Mida del paquet: 13.1 x 10.7 x 6.7 cm; 230 g
Garantia i Suport
This Lepro LED Strip Light comes with a 2 any de garantia. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Botiga Amazon Lepro
