DieseRC Wireless Remote Control Switch Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your DieseRC Wireless Remote Control Switch. This RF 433Mhz relay receiver system is designed for various applications, offering convenient remote control for devices such as motors, lights, and gate doors. Please read this manual thoroughly before use to ensure proper and safe operation.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu:

• Assegureu-vos que la font d'alimentació voltage matches the product's specifications (DC 6V-30V).
• Desconnecteu l'alimentació abans de realitzar qualsevol cablejat o manteniment.
• No exposeu el dispositiu a la humitat, temperatures extremes ni ambients corrosius.
• Avoid short circuits during wiring. Incorrect wiring can damage the device or connected appliances.
• Mantingueu el dispositiu fora de l'abast dels nens.
• If the device malfunctions, discontinue use immediately and consult the troubleshooting section or contact support.

3. Producte acabatview

The DieseRC Wireless Remote Control Switch system consists of a relay receiver module and two remote control transmitters. The receiver features two independent relays, allowing for versatile control of two separate devices or functions.

Figura 3.1: Mésview of the DieseRC Wireless Remote Control Switch system, showing the receiver module and two remote control transmitters.

Característiques principals:

• RF 433Mhz Wireless Control: Stable and reliable performance with high reception sensitivity.
• De llarg abast: Signal can pass through walls, floors, and doors, with a control distance of up to 30 meters.
• Secure Learning Code: Utilizes EV1527 learning code for enhanced system security.
• Dual Independent Relays: Two relays with Normally Open (NO), Common (COM), and Normally Closed (NC) terminals, allowing independent control.
• Múltiples modes de funcionament: Supports Momentary, Toggle, and Latched modes for flexible application.
• Vol. Amplitage Compatibilitat: Receiver operates on DC 6V to 30V.
• Alta capacitat de corrent: 10A relay with 15A high-power terminals.

Figura 3.2: Detallada view of the receiver board showing terminals (NO, COM, NC), antenna, indicator light, and learning button. The remote control features silicone buttons, an indicator light, chrome bezel, and a metal keychain.

4. Especificacions

Figure 4.1: Physical dimensions of the receiver board.

5. Configuració i emparellament

The receiver supports pairing with up to 20 transmitters. Follow these steps to pair your remote controls with the receiver and set the desired operating mode.

Procediment d'aparellament:

The pairing process involves pressing the learning button on the receiver a specific number of times to select the operating mode, then pressing a button on the remote control to confirm pairing.

1. Seleccioneu el mode de funcionament: Press the learning button on the receiver board the corresponding number of times for your desired mode:
   • Mode momentani: Press the learning button 1 cop.
   • Commuta el mode: Press the learning button 2 vegades.
   • Mode tancat: Press the learning button 3 vegades.
2. Inicia l'aparellament: After pressing the learning button, the indicator light on the receiver will flash.
3. Pair Transmitter: Within approximately 3 seconds, press the "A" button on your remote control. The indicator light on the receiver will flash again, indicating successful pairing.
4. Confirm Pairing (Optional for some modes): For some modes, you may need to press the "B" button to complete the pairing for both relays or functions.

Figure 5.1: Visual guide for setting up and pairing the remote control with the receiver for different operating modes.

Reinicialització del receptor:

To clear all paired transmitters from the receiver's memory, follow these steps:

• Press the learning button on the receiver board 8 vegades.
• The indicator light will flash rapidly, then turn off, indicating that all paired transmitters have been cleared.

Figure 5.2: Visual instruction for resetting the receiver module.

6. Modes de funcionament

The receiver offers three distinct operating modes to suit various control needs:

6.1. Momentary Mode (Jog Mode)

In Momentary Mode, the relay remains active only while the remote control button is pressed. ReleasinEl botó desactiva el relé.

• Funcionament: Press and hold button "A" (or "B") on the remote. The corresponding relay will turn ON. Release the button, and the relay will turn OFF.
• Aplicació: Ideal for applications requiring temporary activation, such as electric door locks, momentary light activation, or garage door openers where you hold the button until the door moves.

6.2. Toggle Mode (Self-Locking Mode)

In Toggle Mode, each press of a remote control button reverses the state of the corresponding relay (ON to OFF, or OFF to ON).

• Funcionament: Press button "A" (or "B") once. The corresponding relay will turn ON. Press the same button again, and the relay will turn OFF.
• Aplicació: Suitable for controlling lights, fans, or other devices that need to be switched ON or OFF with a single button press.

6.3. Latched Mode (Interlock Mode)

In Latched Mode, pressing one button turns on its corresponding relay and simultaneously turns off any other active relays. This mode is typically used for controlling devices with two states, like opening and closing a gate.

• Funcionament: Press button "A". Relay 1 will turn ON, and Relay 2 will turn OFF (if it was ON). Press button "B". Relay 2 will turn ON, and Relay 1 will turn OFF (if it was ON).
• Aplicació: Commonly used for controlling motors with forward/reverse functions, or gate/curtain openers where only one action (open/close) should be active at a time.

Figure 6.1: Illustration of the three operating modes and their corresponding relay behaviors.

7. Esquemes de cablejat

Proper wiring is crucial for the safe and correct operation of the device. Refer to the diagrams below for common wiring configurations. Always ensure power is disconnected before making any connections.

7.1. DC Device Wiring (e.g., DC Lamp)

Figure 7.1: Wiring for a DC device (e.g., a DC lamp). Connect the DC power supply to the IN terminals (+V and -V) and the device to the NO/COM terminals of the relay.

7.2. AC Device Wiring (e.g., AC Lamp)

Figure 7.2: Wiring for an AC device (e.g., an AC lamp). Connect the AC power supply to the NO/COM terminals of the relay, and the receiver's power input (DC 6V-30V) separately.

7.3. DC Motor Wiring (e.g., Curtain Motor)

Figure 7.3: Wiring for a DC motor (e.g., a curtain motor). This typically uses two relays in Latched mode for forward/reverse control. Ensure correct polarity.

7.4. AC Motor Wiring (e.g., Garage Door Motor)

Figure 7.4: Wiring for an AC motor (e.g., a garage door motor). This setup also typically uses two relays in Latched mode for directional control. Ensure proper grounding and safety.

Nota: The receiver's power input (DC 6V-30V) is separate from the power supplied to the controlled device (1V-250V). Always consult a qualified electrician if you are unsure about wiring connections, especially for AC applications.

8. Manteniment

To ensure the longevity and optimal performance of your DieseRC Wireless Remote Control Switch, follow these maintenance guidelines:

• Neteja: Wipe the receiver and transmitters with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement (Transmitters): If the remote control's range decreases or the indicator light dims, replace the battery. Refer to the transmitter's casing for battery type (typically a small coin cell battery).
• Condicions ambientals: Store and operate the device in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Comprovació de la connexió: Inspeccioneu periòdicament les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.

9. Solució De Problemes

If you encounter issues with your DieseRC Wireless Remote Control Switch, refer to the following common problems and their solutions:

10. Garantia i Suport

DieseRC is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, DieseRC products are designed for durability and reliability.

If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact DieseRC customer support through the retailer where you purchased the product or visit the official DieseRC brand store for contact information.

For more information about DieseRC and their products, you can visit their brand store: DieseRC Official Store