Producte acabatview
This manual provides instructions for the DieseRC Universal Wireless Remote Control Switch, a versatile 4-channel RF relay receiver board designed for controlling various electrical devices such as garage doors, lights, motors, and electric curtains. It operates on AC 110V-240V and features stable and reliable performance with high reception sensitivity.
Figure 1: DieseRC Universal Wireless Remote Control Switch components, including the receiver board and two 4-button remote controls.
Característiques clau
- Vol. Amplitage Compatibilitat: Operates with AC 85V to 240V, offering flexible application.
- Alta capacitat de potència: High-quality relays can handle up to 15A current, ensuring durability and stable operation.
- Interval estès: RF 433MHz wireless control provides strong signal penetration through walls, floors, and doors, with a control distance of up to 50 meters without obstacles.
- Múltiples modes de funcionament: Admet els modes Momentani, Alternatiu i Enclavat, configurables per adaptar-se a diverses necessitats de control.
- Control multidispositiu: Each receiver can store up to 20 transmitters, and one transmitter can control multiple receivers.
Figure 2: The remote control offers a range of up to 50 meters, providing convenient control throughout your home.
Components del producte
Figura 3: Detallada view of the receiver board, highlighting the antenna, indicator light, learning button, and input/output terminals (NO, COM, NC, L, N).
Figura 4: Detallada view of the remote control, featuring silicone buttons for comfortable use, an indicator light, and a durable metal keychain with a chrome bezel.
Setup and Wiring
The receiver board supports input/output voltages from 1V to 250V and operates with AC 85V to 250V. Each of the four relays has Normally Open (NO), Common (COM), and Normally Closed (NC) terminals, allowing for independent control of connected devices.
Figure 5: Wiring diagram illustrating connections for input power (AC 85V-250V) and output to devices via NO, COM, and NC terminals. Ensure correct polarity and voltage per a la vostra aplicació.
Cablejat Examples:
Figure 6: Various wiring configurations for common applications such as AC motors, DC motors, and lighting systems. Always consult a qualified electrician if unsure about wiring.
Operating Modes and Programming
The DieseRC remote control switch supports multiple operating modes, allowing for flexible control of your devices. Programming involves pressing the learning button on the receiver board a specific number of times, then pressing a button on the remote control.
Programming Instructions Video:
Video 1: This video demonstrates how to program the remote control switch for different operating modes, including Momentary, Toggle, and Latched modes, as well as mixed modes. It shows the steps for pairing the remote with the receiver.
1. Mode momentani (Mode 1)
In Momentary mode, the relay remains active only as long as the remote button is pressed. ReleasinEl botó desactiva el relé.
- Press the learning button on the receiver board 1 cop. El llum indicador s'encén.
- Press any button on the remote control. The indicator light on the receiver will flash, confirming successful pairing.
Figure 7: Visual representation of Momentary Mode (top row), where the light turns on only while the button is pressed.
2. Mode alternatiu (Mode 2)
In Toggle mode, pressing the remote button once activates the relay, and it remains active until the same button is pressed again to deactivate it.
- Press the learning button on the receiver board 2 vegades. El llum indicador s'encén.
- Press any button on the remote control. The indicator light on the receiver will flash, confirming successful pairing.
Figure 7 (middle row): Visual representation of Toggle Mode, where one press turns the light on, and another press turns it off.
3. Mode enganxat (Mode 3)
In Latched mode, pressing one button on the remote activates a relay, and it remains active until another button on the same remote is pressed to deactivate it. Only one relay can be active at a time in this mode.
- Press the learning button on the receiver board 3 vegades. El llum indicador s'encén.
- Press any button on the remote control. The indicator light on the receiver will flash, confirming successful pairing.
Figure 7 (bottom row): Visual representation of Latched Mode, where pressing button 'A' turns on Relay 1, and pressing button 'B' turns on Relay 2 while turning off Relay 1.
Reinicialització del receptor
To clear all programmed remote controls from the receiver, follow these steps:
- Press the learning button on the receiver board 8 vegades.
- The indicator light will flash rapidly and then turn off, indicating that all stored remote controls have been cleared.
Figure 8: Resetting the receiver by pressing the learning button eight times. This clears all previously paired remote controls.
Aplicacions
This versatile RF relay module can be widely used in various settings, providing remote control for a multitude of devices.
Figura 9: Examples of common applications for the RF relay module, such as controlling garage doors, lighting, electric curtains, gates, and electric fans.
Garage Door Control ExampLI:
Video 2: This video demonstrates the use of the relay remote control switch for operating a garage door, showcasing its practical application in a home setting.
Especificacions
| Característica | Especificació |
|---|---|
| Marca | DieseRC |
| Número de model | B098T1XDW8 |
| Tipus de connector | Forat a través |
| Tipus de contacte | Normalment tancat |
| Valoració actual | 10 Amps |
| Tipus de muntatge | Muntatge de PCB |
| Mode d'operació | Toggle Mode (Adjustable to Momentary/Latched) |
| Bobina Voltage | 240 Volts |
| Vol. de commutació màximatage | 240 Volts |
| Vol. de commutació mínimatage | 240 volts (CA) |
| UPC | 750828381330 |
| Pes de l'article | 5.9 unces |
| Bateries | Necessites 1 piles CR2032 (incloses) |
| Data de primera disponibilitat | 14 de juny de 2022 |
| Fabricant | DieseRC |
Resolució de problemes
If you encounter issues with your DieseRC remote control switch, consider the following common troubleshooting steps:
- El comandament a distància no respon:
- Comproveu la pila del comandament a distància (CR2032). Substituïu-la si cal.
- Assegureu-vos que el receptor estigui encès i connectat correctament.
- Reprogram the remote control to the receiver following the "Operating Modes and Programming" instructions.
- Verify that the remote is within the effective operating range (up to 50 meters without obstacles).
- Relay Not Activating/Deactivating Correctly:
- Confirm the operating mode (Momentary, Toggle, Latched) is correctly set for your application. Refer to the programming section.
- Check the wiring connections to the device and ensure they are secure and correct (NO, COM, NC).
- Ensure the connected device is within the current and voltage limits of the relay (10A, 240V).
- Interferència:
- Strong electromagnetic interference can affect performance. Try relocating the receiver or reducing sources of interference.
- Receiver Indicator Light Behavior:
- If the light does not respond during programming, ensure the learning button is pressed correctly and for the appropriate duration.
- If the light is constantly on or off unexpectedly, try resetting the receiver (press 8 times) and then reprogramming.
Garantia i Suport
DieseRC is committed to providing high-quality products and excellent after-sales service. For any questions, technical assistance, or warranty claims, please contact DieseRC customer support.
- Fabricant: DieseRC
- Manual d'usuari (PDF): Hi ha disponible per descarregar un manual d'usuari detallat en format PDF. Descarrega el manual en PDF
- Servei postvenda: DieseRC strives to provide perfect after-sales service to resolve any customer issues.
