1. Introducció
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Instruccions de seguretat
Observeu sempre les següents precaucions de seguretat per evitar descàrregues elèctriques, incendis o lesions:
- Aquest dispositiu només és per a ús professional.
- Assegureu-vos que la font d'alimentació voltage coincideix amb els requisits del dispositiu.
- No exposeu el dispositiu a la pluja o la humitat.
- Connecteu sempre el dispositiu a una presa de corrent amb terra.
- Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Eviteu l'exposició directa dels ulls a la font de llum.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Always secure the device with a safety cable when mounting overhead.
- Desconnecteu de l'alimentació abans de netejar o fer manteniment.
3. Producte acabatview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Figura 3.1: Frontal view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Figura 3.2: Frontal view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Components
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Suport de muntatge ajustable
- Safety Rope Attachment Point
4. Configuració
4.1 Muntatge
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp o estar dret.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Connexió d'alimentació
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
Connexió DMX 4.3 (opcional)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Instruccions de funcionament
5.1 Funcionament del tauler de control
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- MENÚ: Enters the menu or goes back to the previous menu level.
- AMUNT: Scrolls up through menu options or increases a value.
- BAIX: Scrolls down through menu options or decreases a value.
- ENTRAR: Confirma una selecció o entra a un submenú.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Canal | Funció | Interval de valors | Descripció |
|---|---|---|---|
| 1 | Master Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 Dimmer | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Efecte estroboscòpic | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Programes integrats | 0-255 | Selects various pre-programmed light shows |
| 6 | Velocitat del programa | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Mode automàtic: Cycles through pre-programmed light sequences.
- Mode actiu de so: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Neteja: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp es pot fer servir un drap. No utilitzeu productes de neteja abrasius ni dissolvents.
- Neteja de ventiladors i conductes d'aire: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Inspecció del cable: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Emmagatzematge: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Solució De Problemes
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Sense control DMX | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Lights flicker or behave erratically | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| La unitat es sobreescalfa | Blocked ventilation; operating in high ambient temperature. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | lightmaXX |
| Número de model | LIG0016526-000 |
| Font de llum | 2 x 50W COB Warm White LEDs |
| Canals DMX | 6 canals |
| Modes de control | DMX, Auto, Sound Active, Manual |
| Dimensions (L x A x A) | 31.2 x 18.7 x 18.5 cm (aprox. 12.28 x 7.36 x 7.28 polzades) |
| Font d'alimentació | Elèctric amb cable |
| Tipus d'instal·lació | Ceiling Mount (with bracket) |
| Color | Negre |
9. Garantia i Suport
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
