REDARC SPFP1200

REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200 User Manual

1. Introducció

This manual provides essential information for the safe and efficient use of your REDARC 200W Monocrystalline Portable Folding Solar Panel (Model: SPFP1200). Please read these instructions carefully before setup and operation to ensure optimal performance and longevity of your solar panel. This product is designed to convert sunlight into electrical energy for charging 12V battery systems.

2. Informació de seguretat

Observeu les següents precaucions de seguretat per evitar lesions i danys al producte:

  • Do not attempt to disassemble, modify, or repair the solar panel. Unauthorized modifications can be dangerous and will void the warranty.
  • Manipuleu el panell solar amb cura. Eviteu deixar-lo caure ni sotmetre'l a impactes forts.
  • Ensure all electrical connections are secure and correctly polarized before connecting to a battery or charge controller. Incorrect wiring can cause damage.
  • Do not touch exposed wires or terminals when the panel is exposed to sunlight, as it will generate electricity.
  • Keep the solar panel away from open flames, flammable gases, and liquids.
  • Always use an appropriate solar charge controller between the solar panel and the battery to prevent overcharging and reverse current flow.
  • Keep children and pets away from the solar panel during operation.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

  • REDARC 200W Monocrystalline Portable Folding Solar Panel
  • Integrated adjustable support legs
  • Connection cables (typically with Anderson-style plugs or similar)
  • Manual d'usuari (aquest document)

4. Configuració

Follow these steps to set up your portable folding solar panel:

  1. Desplega el panell: Carefully unfold the solar panel sections on a flat, stable surface.
  2. Posicioneu les cames: Extend and lock the integrated adjustable support legs to prop up the panel. Ensure the legs are stable and can support the panel's weight.
  3. Angle Towards the Sun: Adjust the angle of the panel using the support legs to face directly towards the sun for maximum efficiency. The optimal angle will vary depending on your location and the time of day.
  4. Connect to Charge Controller: Connect the solar panel's output cable to the input terminals of a compatible solar charge controller. Ensure correct polarity (positive to positive, negative to negative).
  5. Connectar a la bateria: Connect the output terminals of the solar charge controller to your 12V battery system. Always connect the charge controller to the battery abans connecting it to the solar panel.

Image: REDARC 200W Monocrystalline Portable Folding Solar Panel in deployed state.

REDARC 200W Monocrystalline Portable Folding Solar Panel deployed with adjustable legs

This image shows the REDARC 200W Monocrystalline Portable Folding Solar Panel unfolded and set up with its adjustable legs, ready for sun exposure. The panel's dark, reflective surface indicates its monocrystalline cells, and the sturdy frame is visible.

5. Funcionament

Once set up, the solar panel will begin generating power when exposed to sunlight. The charge controller will regulate the power flow to your battery.

  • Càrrega del monitor: Observe the indicators on your solar charge controller to confirm that the battery is charging correctly.
  • Adjust for Sun: For best results, periodically adjust the panel's angle throughout the day to follow the sun's path.
  • Factors ambientals: Cloud cover, shade, and dust on the panel will reduce power output.

No s'han trobat vídeos oficials de productes del venedor per incrustar en aquest manual.

6. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your solar panel:

  • Neteja: Clean the surface of the solar panel regularly with a soft, damp cloth to remove dust, dirt, and debris. Avoid abrasive cleaners or harsh chemicals.
  • Inspeccionar connexions: Periodically check all electrical connections for corrosion, looseness, or damage. Ensure they are clean and secure.
  • Emmagatzematge: When not in use, fold the solar panel and store it in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying case if available.
  • Inspecció física: Inspect the panel for any physical damage, such as cracks in the glass or frame, before and after each use.

7. Solució De Problemes

If you encounter issues with your solar panel, refer to the table below for common problems and solutions:

ProblemaCausa possibleSolució
No power output from panelNo sunlight, panel in shade, dirty panel surface, faulty connection.Move panel to direct sunlight, remove any shading, clean panel surface, check all connections.
Sortida de baixa potènciaPartial shading, incorrect panel angle, cloudy weather, dirty panel, undersized charge controller.Ensure full sun exposure, adjust panel angle, clean panel, verify charge controller is rated for 200W.
La bateria no es carregaCharge controller fault, incorrect wiring, battery fault, insufficient solar input.Check charge controller status, verify wiring polarity, test battery, ensure adequate sunlight.
Panel appears damagedPhysical impact, improper handling.Discontinue use. Contact REDARC support for assistance. Do not attempt repairs.

8. Especificacions

Key technical specifications for the REDARC 200W Monocrystalline Portable Folding Solar Panel SPFP1200:

EspecificacióValor
MarcaREDARC
Número de modelSPFP1200
Potència màxima200 watts
MaterialMonocristal·lina
EficiènciaAlta eficiència
Pes de l'article24.2 lliures (10.98 kg)
Dimensions del producte (plegat)Aproximadament 34.6 x 30.9 x 3.7 polzades (87.9 x 78.5 x 9.4 cm)
EstilAjustable, portàtil
FabricantElectrònica REDARC

9. Garantia i Suport

REDARC products are manufactured to high standards and come with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are typically provided with your purchase documentation or can be found on the official REDARC weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For technical support, warranty inquiries, or service, please contact REDARC customer service directly. Refer to the REDARC weblloc web per obtenir la informació de contacte i els recursos d'assistència més actualitzats.

Documents relacionats - SPFP1200

Preview Instal·lació de suports REDARC ABS per a panells solars monocristal·lins fixos
Una guia sobre com instal·lar suports d'ABS REDARC per a panells solars monocristal·lins fixos en autocaravanes i embarcacions sense perforar, garantint la integritat del segellat. Cobreix els models SMI9001, SMI9002, SMI9003 i SMI9007.
Preview Volum de circuit únic REDARC de 12V a 24Vtage Boosters: Manual d'usuari de VI180D, VI360D, VI720D
Aquest document proporciona especificacions detallades, característiques, guia d'instal·lació i informació de garantia per a la sèrie VI de 12V a 24V de circuit únic Vol de REDARC.tage Boosters, inclosos els models VI180D, VI360D i VI720D.
Preview Panells solars monocristal·lins REDARC: Models SMSP1050-SMSP1200 - Guia d'instal·lació i seguretat
Guia completa dels panells solars monocristal·lins de REDARC (SMSP1050, SMSP1080, SMSP1120, SMSP1180, SMSP1200), que cobreix les especificacions, la seguretat, la instal·lació, el cablejat i la garantia per a aplicacions en autocaravanes i caravanes.
Preview Panells solars monocristal·lins REDARC: Guia d'instal·lació, especificacions i seguretat
Guia completa dels panells solars monocristal·lins REDARC (SMSP1050-SMSP1200), que inclou característiques, especificacions detallades, instruccions d'instal·lació, diagrames de cablejat, precaucions de seguretat i informació sobre la garantia.
Preview Kit de muntatge GPC per a REDARC ALPHA R 50A - Guia d'instal·lació d'INEOS GRENADIER
Guia d'instal·lació detallada del kit de muntatge GPC per al sistema de bateria dual REDARC ALPHA R 50A, específicament per al vehicle INEOS GRENADIER. Inclou instruccions pas a pas, avisos de seguretat i detalls de posada en marxa.
Preview REDARC BCDC ALPHA 100R: Carregador de bateria de 12V 100A DC-DC amb Bluetooth: Guia d'instal·lació
Exploreu el REDARC BCDC ALPHA 100R, un carregador de bateries de 12 V i 100 A CC-CC amb monitorització intel·ligent de la bateria i connectivitat Bluetooth. Aquesta guia proporciona detalls d'instal·lació, configuració i funcionament per a una gestió òptima de l'energia del vehicle.