Sytas Ergonomic Desk Chair User Manual

Introducció

Thank you for choosing the Sytas Ergonomic Desk Chair. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new chair. Designed with your comfort and health in mind, this chair features an S-shaped ergonomic backrest, supportive lumbar support, breathable mesh, and convenient adjustable functions to enhance your daily work or study experience.

Figure 1: Sytas Ergonomic Desk Chair (Black)

Informació de seguretat

• Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge.
• Follow assembly instructions carefully. Do not overtighten screws.
• Do not stand on the chair. Use only for seating one person.
• No supereu la capacitat màxima de pes de 300 lliures (136 kg).
• Mantingueu les mans i els dits allunyats de les peces mòbils durant l'ajust.
• Inspeccioneu regularment tots els cargols i connexions per assegurar-vos que estiguin ben fixats.
• Keep away from open flames or excessive heat.
• Utilitzeu-lo en una superfície plana i estable.

Contingut del paquet

Before beginning assembly, verify that all parts listed below are included in your package:

• Chair Backrest (Mesh)
• Seat Cushion (Padded)
• Armrests (Flip-up, Padded) - 2 pieces
• Base de cadira (5 estrelles)
• Casters (Wheels) - 5 pieces
• Cilindre d'elevació de gas
• Mechanism Plate (for seat adjustment)
• Hardware Kit (screws, washers, Allen key, decoration caps)
• Manual d'usuari (aquest document)

Figura 2: Dimensions i components del producteview

Muntatge i muntatge

Assembly typically takes 15-20 minutes. All necessary tools are included. For a visual guide, please refer to the official assembly video below.

Muntatge pas a pas:

1. Muntar la base: Insert the five casters into the holes at the end of each leg of the 5-star base. Push firmly until they click into place.
2. Install the Gas Lift: Place the gas lift cylinder into the central hole of the assembled 5-star base.
3. Attach the Mechanism Plate: Secure the mechanism plate to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
4. Connect Armrests to Backrest: Attach the armrests to the backrest using the designated screws.
5. Attach Backrest/Armrest Assembly to Seat: Align the backrest and armrest assembly with the pre-drilled holes on the seat cushion and secure with screws.
6. Combine Seat and Base: Carefully place the assembled seat onto the gas lift cylinder, ensuring it is firmly seated. Apply gentle downward pressure to secure the connection.
7. Add Decoration Caps: Cover any visible screw heads with the provided decoration caps for a clean finish.

Instruccions de funcionament

Ajust d'alçada:

To adjust the chair's height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the chair. To raise the chair, stand up and pull the lever up. Release the lever at your desired height to lock it in place.

Tilt Function (Rocking Style):

The chair features a 90°-120° tilt tension for comfortable reclining. To activate the tilt, pull out the adjustment lever located on the left side, beneath the seat. To lock the chair in an upright position, push the lever back in. The tilt tension knob, located at the front of the mechanism, can be rotated to adjust the resistance of the recline.

Figure 3: Tilt Function Controls

Flip-Up Armrests:

The padded armrests can be flipped up 90° to save space or allow the chair to be pushed closer to a desk. Simply lift the armrests upwards until they lock into the vertical position. To return them to the horizontal position, gently pull them down.

Figure 4: Flip-Up Armrests in action

Suport ergonòmic:

The S-shaped backrest is designed to align with the natural curve of your spine, providing supportive lumbar support and reducing muscle fatigue. The high-density double-layer mesh back is breathable, ensuring comfort during long periods of use.

Figure 5: Ergonomic Design for Spinal Support

Manteniment

• Neteja: Netegeu amb un anunciamp cloth. For mesh and fabric areas, use a mild soap solution if necessary, and blot dry. Avoid harsh chemicals or abrasive cleaners.
• Inspecció: Periodically check all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
• Rodes: Keep casters free of debris (hair, dust, etc.) to ensure smooth rolling. Clean regularly.
• Ascensor de gas: No intenteu desmuntar el cilindre d'elevació de gas. Si funciona malament, poseu-vos en contacte amb el servei d'atenció al client.

Resolució de problemes

Especificacions

Garantia i Suport

Sytas offers a 1-year warranty for this product. For any questions, issues, or warranty claims, please contact Sytas customer service. We are committed to providing effective assistance and ensuring your satisfaction.

For more information or to contact support, please visit the official Sytas Store: Sytas Store on Amazon