Electrolux Acqua Pure Water Filter/Refill Instruction Manual

1. Introducció

This manual provides essential information for the proper use and maintenance of your Electrolux Acqua Pure Water Filter/Refill (Model PAPPCA50). Designed to ensure pure and healthy drinking water, this original Electrolux refill utilizes advanced filtration technology. Please read these instructions carefully before installation and use.

2. Característiques del producte

The Electrolux Acqua Pure filter is engineered for superior water purification, offering the following key features:

• Advanced Filtration Technology: Approved by Inmetro and ABNT, ensuring proven efficiency in particle retention, microbiological control, and reduction of free chlorine.
• Activated Carbon with Silver Ions: This composite material effectively reduces solid particles and sediments such as metals, clay, sand, rust, algae, and fungi. It also inhibits the development of bacteria and other microorganisms, while reducing unpleasant odors and tastes in the water.
• Meltblown Polypropylene Barrier: Provides high flow rates and enhanced capacity for retaining contaminants, further purifying the water.

Image 2.1: The Electrolux Acqua Pure Water Filter/Refill, showcasing its sleek design and branding.

Image 2.2: The Electrolux Acqua Pure Water Filter/Refill presented in its original packaging.

3. Compatibilitat

This Electrolux Acqua Pure Water Filter/Refill (Model PAPPCA50) is specifically designed for use with the following Electrolux water purifier models:

• PC02B
• PC02X
• PE12A
• PE12B
• PE12G
• PE12V

Using original Electrolux refills ensures optimal performance and maintains the quality of your purified water.

Image 3.1: Visual guide illustrating the compatibility of the Acqua Pure filter with various Electrolux water purifier models.

4. Instal·lació i substitució

Follow these general steps to replace your Electrolux Acqua Pure filter. Refer to your specific purifier's manual for detailed instructions.

1. Turn off the water supply to the purifier.
2. Locate the filter compartment, usually at the top or side of the purifier.
3. Twist the old filter counter-clockwise to unlock and remove it.
4. Insert the new Electrolux Acqua Pure filter into the compartment.
5. Twist the new filter clockwise until it locks securely into place.
6. Torneu a encendre el subministrament d'aigua.
7. Flush the new filter by dispensing water for a few minutes (refer to your purifier's manual for exact flushing time) to remove any air and carbon fines.
8. Reset the filter indicator on your purifier, if applicable.

Image 4.1: The Electrolux Acqua Pure filter positioned alongside a compatible Electrolux water purifier, illustrating its intended use.

Image 4.2: A visual representation of the Electrolux Acqua Pure filter in the context of a water purifier, demonstrating the filter's placement.

5. Manteniment

To ensure continuous access to pure and safe drinking water, it is crucial to replace the Electrolux Acqua Pure filter regularly. The recommended replacement schedule is:

• Cadascú 3,000 litres of filtered water, or
• Cadascú 6 mesos, el que passi primer.

Adhering to this schedule helps maintain the filter's effectiveness in removing contaminants and ensures the longevity of your water purifier.

6. Informació important

Warning: The use of non-original or 'compatible' refills is not tested or approved by Electrolux. Such products may compromise the quality of your drinking water, reduce the lifespan, and negatively affect the performance of your Electrolux water purifier. Always use original Electrolux Acqua Pure refills to ensure safety and optimal functionality.

7. Especificacions

8. Suport

For further assistance, technical support, or warranty information regarding your Electrolux Acqua Pure Water Filter/Refill or compatible Electrolux water purifier, please refer to the official Electrolux website or contact Electrolux customer service directly.