Introducció
This manual provides detailed instructions for the safe and effective operation of your Nitecore P10ix Type-C Rechargeable Ultra Compact Flashlight. Please read this manual thoroughly before use and retain it for future reference.
Image: The Nitecore P10ix flashlight shown with its included accessories: two extra NL2150HPi batteries, a USB-C charging cable, and a tactical holster.
Contingut del paquet
Upon opening your package, please verify that all items listed below are present and in good condition:
- Nitecore P10ix Flashlight
- 3x NL2150HPi Rechargeable Batteries (including one pre-installed or packaged separately)
- NTH10 Tactical Holster
- Clip
- Corda
- Junta tòrica de recanvi
- Cable de càrrega USB-C
Configuració
Instal·lació de la bateria
- Desenrosqueu la tapa posterior de la llanterna en sentit antihorari.
- Insert the NL2150HPi 21700 Li-ion battery with the positive (+) terminal facing towards the head of the flashlight.
- Torneu a enroscar la tapa de la cua en sentit horari fins que estigui ben ajustada.
Carregant la bateria
The Nitecore P10ix features a built-in USB-C charging port for convenient recharging of the 21700 Li-ion battery.
- Locate the USB-C charging port cover on the flashlight body.
- Open the rubber cover to expose the USB-C port.
- Connect one end of the provided USB-C charging cable to the flashlight's port and the other end to a USB power source (e.g., USB adapter, computer, power bank).
- The power indicator light will illuminate to show charging status. Refer to the flashlight's specific indicator behavior for full charge notification (typically solid green or off).
- Once charging is complete, disconnect the cable and securely close the rubber cover to protect the port from dust and water.
Instruccions de funcionament
Funcions de commutació
Imatge: Detallada view of the flashlight's tail cap, highlighting the main Tactical Tail Switch and the smaller STROBE READY Mode Button for output adjustment and instant strobe/turbo access.
- Interruptor de cua tàctic: This is the primary power button located at the very end of the tail cap.
- Encesa momentània: Half-press and hold for momentary illumination. Release to turn off.
- Encès constant: Full-press until a click is heard for constant illumination. Full-press again to turn off.
- STROBE READY™ Mode Button: This smaller, raised button is located next to the Tactical Tail Switch.
- Ajust de sortida: When the flashlight is on, press this button to cycle through brightness levels (e.g., Ultra-low, Low, Mid, High, Turbo).
- Instant Strobe/Turbo: When the flashlight is off, half-press or full-press the Tactical Tail Switch to directly access TURBO mode if Strobe is not memorized. This provides an instant dazzling strike, ideal for self-defense and law enforcement.
Image: The Nitecore P10ix flashlight demonstrating its 4000 lumens instant dazzle strike capability, useful for immediate disorientation.
Modes especials
The P10ix features a specialized Strobe mode designed for tactical applications.
Image: An illustration emphasizing the 2nd Generation STROBE READY Technology, which allows instant strobe access from any state and features an inset pedal design to prevent accidental activation.
- Mode estroboscòpic: To activate Strobe mode, ensure the flashlight is off. Half-press and hold the STROBE READY™ Mode Button. Release to turn off. This mode provides randomly changing frequencies (16Hz-20Hz) for stronger dizzying effects.
Image: A visual representation of the randomly changing strobe mode, designed to create a disorienting effect due to its variable frequency.
Manteniment
- Neteja: Periodically clean the threads of the tail cap and the O-rings with a clean cloth. Apply a thin layer of silicone grease to the threads and O-rings to maintain water resistance.
- Cura de la bateria: If the flashlight is to be stored for an extended period, remove the battery to prevent leakage. Recharge batteries every three months to prolong their lifespan.
- Resistència a l'aigua: The P10ix is not water resistant. Avoid exposing the flashlight to water or high humidity. Ensure the USB-C port cover is securely closed at all times when not charging.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llanterna no s'encén. | La bateria està esgotada o inserida incorrectament. | Recharge or replace the battery. Ensure the positive (+) terminal faces the head. |
| La llum parpelleja o és tènue. | Loose tail cap or dirty contacts. | Tighten the tail cap. Clean battery contacts and flashlight threads. |
| L'indicador de càrrega no funciona. | Problema amb el cable USB o la font d'alimentació. | Prova un altre cable USB o adaptador de corrent. Assegura't que el cable estigui completament inserit. |
Especificacions
Image: An illustration detailing the quad-core LED setup of the Nitecore P10ix, emphasizing its 4000 lumens maximum output and 158m beam throw.
| Característica | Detall |
|---|---|
| Sortida màxima | 4000 lúmens |
| Distància màxima del feix | 158 metres |
| Max Beam Intensity | 6250 cd |
| Temps d'execució màxim | 38 hores |
| LED | 4x CREE XP-L2 V6 |
| Modes especials | Strobe |
| Longitud | 137.2 mm (5.40 polzades) |
| Mida del cap | 25.4 mm (1.00 polzades) |
| Pes | 79.5 g (2.80 oz) |
| Font d'alimentació | Battery Powered (3x Lithium Ion batteries required) |
| Material | Alumini |
| Nivell de resistència a l'aigua | No resistent a l'aigua |
Image: A comparison chart illustrating the significant lumen output increase of the P10ix (4000 lumens) compared to previous Nitecore P10 series models.
Informació de la garantia
Els detalls específics de la garantia normalment es proporcionen amb l'embalatge del producte o a la fitxa oficial del fabricant. website. Please refer to the documentation included with your Nitecore P10ix flashlight for the most accurate and up-to-date warranty policy.
Suport i Contacte
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding your Nitecore P10ix flashlight, please visit the official Nitecore weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Nitecore Official Weblloc: www.nitecore.com
Please have your product model number (P10iX_2xNL2150HPi) and purchase date ready when contacting support.
