Manual d'usuari del conjunt de trepant sense fil i accessoris Kiwi S2205908

1. Introducció

Thank you for choosing the Kiwi S2205908 Cordless Drill and Accessory Set. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

The Kiwi S2205908 (also known as Khsd 7517) is a versatile 12V cordless drill designed for various drilling and screwdriving tasks around the home and workshop. It features a maximum rotational speed of 750 RPM and comes with a 1.3 Ah Lithium-Ion battery.

2. Instruccions de seguretat

Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu eines elèctriques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra. No exposeu les eines elèctriques a la pluja ni a condicions humides.
• Seguretat personal: Always wear eye protection. Use hearing protection when operating the drill for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació i/o retireu la bateria abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
• Ús i cura de la bateria: Recarrega només amb el carregador especificat pel fabricant. No utilitzeu bateries amb altres eines elèctriques.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:

• Kiwi S2205908 Cordless Drill
• 12V 1.3 Ah Lithium-Ion Battery Pack
• Battery Charger (AC powered)
• Broques variades
• Puntes de tornavís variades
• Titular de bit
• Estoig d'emmagatzematge
• Manual d'usuari (aquest document)

Image 1: Kiwi S2205908 Cordless Drill and Accessory Set. This image displays the yellow and black cordless drill, a 12V 1.3Ah Lithium-Ion battery, a selection of drill bits, a bit holder, and the clear plastic storage case.

4. Característiques i components del producte

Familiarize yourself with the main parts of your cordless drill:

1. Mandril sense clau: Per a canvis de broques ràpids i fàcils.
2. Anell d'ajust de parell: To select the desired torque setting for screwdriving or drilling.
3. Selector endavant/enrere: To change the rotation direction.
4. Interruptor d'activació: Activates the drill and controls speed based on pressure.
5. Bateria de la bateria: Removable 12V 1.3 Ah Lithium-Ion battery.
6. Ranures de ventilació: Per a la refrigeració del motor.

Image 2: Kiwi S2205908 Cordless Drill. This image provides a detailed view of the yellow and black drill, highlighting its ergonomic handle, keyless chuck, and the 12V 1.3Ah Lithium-Ion battery pack.

5. Configuració

5.1 Càrrega de la bateria

The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use.

1. Connect the AC charger to a standard wall outlet.
2. Feu lliscar la bateria al carregador fins que encaixi al seu lloc.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger instructions for specific light indications).
4. Un cop carregat, desconnecteu el carregador de la presa de corrent i retireu la bateria.

Nota: The battery pack may become warm during charging. This is normal. Do not charge in extreme temperatures.

5.2 Instal·lació i extracció de la bateria

• Per instal·lar: Alineeu el paquet de bateries amb la base del mànec del trepant i feu-lo lliscar fins que encaixi fermament al seu lloc.
• Per eliminar: Press the battery release button (if present, typically on the sides of the battery) and slide the battery pack out of the handle.

5.3 Installing and Removing Drill/Screwdriver Bits

1. Ensure the drill is switched off and the forward/reverse selector is in the neutral (locked) position.
2. Rotate the keyless chuck counter-clockwise to open the chuck jaws.
3. Introduïu la broca o la broca de tornavís desitjada al mandril, assegurant-vos que estigui centrada.
4. Rotate the keyless chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten only.
5. Per eliminar: Gireu el mandril en sentit antihorari per afluixar les mordasses i treure la broca.

6. Instruccions de funcionament

6.1 Rotació endavant/enrere

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening screws) and to the right for reverse rotation (removing screws). Position it in the center to lock the trigger and prevent accidental starting.

6.2 Control de velocitat

The drill features variable speed control. The speed of rotation is controlled by the amount of pressure applied to the trigger switch. Pressing the trigger lightly results in lower speed, while pressing it fully results in maximum speed (up to 750 RPM).

6.3 Ajust del parell de torsió

The torque adjustment ring allows you to select the appropriate torque setting for screwdriving applications. Lower settings are for smaller screws or softer materials, while higher settings are for larger screws or harder materials. The drill setting (often indicated by a drill bit icon) provides maximum torque for drilling.

6.4 Perforació

1. Seleccioneu la broca adequada per al material i la mida del forat.
2. Set the torque adjustment ring to the drill icon for maximum power.
3. Mark the drilling spot.
4. Si és possible, subjecteu el trepant fermament amb les dues mans.
5. Start drilling at a low speed to prevent the bit from wandering, then increase speed as the bit engages the material.
6. Aplica una pressió constant i uniforme. No forcis el trepant.

6.5 El cargol

1. Select the correct screwdriver bit for the screw head.
2. Set the torque adjustment ring to a suitable setting for the screw size and material. Start with a lower setting and increase if needed.
3. Place the screwdriver bit into the screw head.
4. Apply firm, steady pressure to prevent cam-out (the bit slipping from the screw head).
5. Start at a low speed and increase as the screw drives in.

7. Manteniment

• Neteja: Mantingueu netes les ranures de ventilació de l'eina per evitar el sobreescalfament. Feu servir un drap suau i sec.amp drap per netejar l'exterior. No utilitzeu productes químics agressius ni netejadors abrasius.
• Cura de la bateria: Store battery packs in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Recharge them periodically if not in use.
• Emmagatzematge: When not in use, store the drill and accessories in their original case in a dry, secure location out of reach of children.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

Kiwi products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or contact Kiwi customer service through their official weblloc web o canals de contacte.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.