1. Introducció
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Okin JLDQ.10.435.250I recliner bed actuator motor. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.
2. Producte acabatview
The Okin JLDQ.10.435.250I is a refined linear actuator motor designed for recliner beds and power lift chairs. It serves as a direct replacement for specific Okin JLDQ series motors. The actuator motor set includes one motor unit and two connectors: a 5-pin round plug for the switch hand control and a 2-pin square plug with a clip for the power supply.
Image 2.1: The Okin JLDQ.10.435.250I recliner bed actuator motor.
Image 2.2: Close-up of the 2-pin power supply plug and 5-pin recliner switch plug.
3. Especificacions
| Característica | Detall |
|---|---|
| Model | JLDQ.10.435.250I |
| Aparença | Negre (PA), Blanc platejat (alumini) |
| Ictus | 250 mm |
| Dimensions mínimes (retracció) | 435 mm |
| Dimensions màximes (ampliades) | 685 mm |
| Càrrega (força d'empenta) | 1000 N |
| Càrrega (força de tracció) | 1000 N |
| Freqüència d'operació | Encès 1 minut / Apagat 8 minut |
| Entrada de potència | 24V === 50W (as per label) |
| Número de sèrie Example | 21053376T 00006 |
Image 3.1: Product label showing model number JLDQ.10.435.250I i dades tècniques.
4. Compatibilitat
This Okin JLDQ.10.435.250I motor is designed as a replacement for the original Okin JLDQ motor, model JLDQ.10.435.250I. It can also replace the following models, though minor differences may exist that do not affect general use:
- JLDQ.19B.435.250D02
- JLDQ.19B.435.250D03
- JLDQ.19B.435.250D04
- JLDQ.10.435.250
- JLDQ.3.435.250
- sèrie 1.28.000.110.30
Important: Always verify your existing motor's brand, model, minimum install dimension, stroke, and plug types to ensure compatibility with the replacement unit. Different actuators may not be compatible with all recliner frames.
5. Informació de seguretat
Si us plau, observeu les precaucions de seguretat següents:
- Ensure the power supply is disconnected before attempting any installation, maintenance, or troubleshooting.
- Aquest motor està dissenyat només per a ús interior.
- Do not operate the motor if any part is damaged or if the cables are frayed.
- Mantingueu les mans i la roba ampla allunyades de les parts mòbils durant el funcionament.
- Connection is only to class 2 DC circuit.
- Si no esteu segurs de cap pas, consulteu un tècnic qualificat.
6. Instal·lació
The installation process is generally straightforward. Follow these steps:
- Desconnecteu l'alimentació: Unplug the recliner or bed from the main power outlet.
- Motor d'accés: Carefully position the recliner to access the existing motor. This may involve tilting the chair or removing a fabric cover.
- Desconnecta el motor antic:
- Disconnect the 5-pin round plug from the hand control.
- Desconnecteu el connector quadrat de 2 pins de la font d'alimentació.
- Unbolt or unclip the old motor from the recliner frame.
- Treure el motor antic: Carefully remove the old actuator motor from the recliner mechanism.
- Instal·lar un motor nou:
- Position the new Okin JLDQ.10.435.250I motor in the same location as the old one.
- Securely bolt or clip the new motor to the recliner frame.
- Connectar el motor nou:
- Connecteu l'endoll rodó de 5 pins al comandament manual.
- Connect the 2-pin square plug with the clip to the power supply. Ensure a secure connection.
- Funcionalitat de prova: Reconnect the recliner to the power outlet and test the motor's operation using the hand control. Ensure smooth extension and retraction.
Imatge 6.1: Lateral view of the motor, showing mounting points and overall structure.
Imatge 6.2: Anglesa view of the motor, illustrating its compact design for installation.
7. Funcionament
Once installed and connected, operate the recliner motor using the hand control unit. Press the appropriate buttons on the hand control to extend or retract the recliner mechanism. The motor is designed for intermittent use with an operation frequency of "On 1 min / Off 8 min" to prevent overheating and ensure longevity.
Image 7.1: Visual representation of the motor's features and its application in a recliner chair.
8. Manteniment
The Okin JLDQ.10.435.250I motor requires minimal maintenance:
- Neteja: Keep the motor free from dust and debris. Wipe with a dry cloth. Do not use liquid cleaners directly on the motor.
- Inspecció: Periodically inspect the motor and all connections for any signs of wear, damage, or loose fittings.
- Lubricació: El motor ve lubricat de fàbrica i, en general, no requereix lubricació addicional.
9. Solució De Problemes
If your recliner motor is not functioning correctly, consider the following:
- Sense energia:
- Ensure the recliner is securely plugged into a working power outlet.
- Comproveu si la font d'alimentació presenta algun indicador lluminós o signes de danys.
- Verify the 2-pin square plug connection to the power supply is firm.
- El motor no respon:
- Check the 5-pin round plug connection to the hand control.
- Inspect the hand control for damage or stuck buttons.
- Ensure the motor is not jammed by any obstructions in the recliner mechanism.
- Sobreescalfament del motor:
- Adhere to the "On 1 min / Off 8 min" operation frequency. Excessive continuous use can cause overheating.
- Assegureu-vos una ventilació adequada al voltant del motor.
- Sorolls inusuals:
- Disconnect power and inspect the motor and recliner mechanism for any loose parts or foreign objects.
Si els passos de resolució de problemes no resolen el problema, poseu-vos en contacte amb l'atenció al client.
10. Garantia i Suport
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Okin brand store or contact your retailer. Keep your purchase receipt for warranty claims.
Visit the official Okin Store: Botiga Okin a Amazon
