Manual d'instruccions de la banyera d'hidromassatge BUENOSPA Jersey WM00762 per a 6 persones i 46 jets

1. Introducció

Welcome to the BUENOSPA Jersey Hot Tub experience. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new hot tub. Please read all instructions carefully before use and retain this manual for future reference.

2. Característiques del producte

• Ergonomic Seating & Jets: The Jersey hot tub features ergonomically designed seats and 46 massage jets, including a spacious corner area with neck and shoulder massage.
• Armari resistent: The HorizontSide cabinet is constructed from horizontally laid, thick-lath, wood-effect, UV-resistant polymer material, ensuring durability and low maintenance.
• Color Therapy Lighting: Integrated color therapy lighting enhances the ambiance and can positively influence psychological well-being.
• Filtració avançada: Equipped with a superfine filter and an Ozone generator to maintain exceptionally high-quality, crystal-clear bathing water with minimal chemical use.
• Aïllament tèrmic: Includes a thermal cover to ensure consistent water temperature and high thermal insulation effectiveness, reducing energy consumption.
• Font d'alimentació: Funciona amb corrent altern.

Figure 2.1: The BUENOSPA Jersey 6-Person 46-Jet Hot Tub in Ice White.

Figura 2.2: Primer pla view of the hot tub interior, highlighting the stainless steel jets and ergonomic seating.

Figure 2.3: The hot tub with its color therapy lighting system activated, displaying a blue hue.

Figure 2.4: Diagram showing various body massage zones within the hot tub for targeted relaxation.

3. Configuració

3.1 Preparació del lloc

Ensure the installation site is a solid, level surface capable of supporting the hot tub's weight when filled (approximately 300 gallons of water plus occupants). Adequate drainage should be available.

3.2 Connexió elèctrica

The hot tub requires a 240 Volt AC power source. Consult a qualified electrician for proper installation of a dedicated circuit and GFCI protection, if not already present. The hot tub is designed for plug-and-play operation once the appropriate outdoor outlet is installed.

3.3 Filling the Hot Tub

1. Ensure all drain valves are closed.
2. Place a garden hose into the filter compartment or directly into the footwell.
3. Fill the hot tub to the recommended water level, typically above the highest jets but below the top edge.

3.4 Inici inicial

After filling, connect the hot tub to the power supply. The control panel will initiate a startup sequence. Allow several hours for the water to reach the desired temperature.

4. Instruccions de funcionament

4.1 Tauler de control

The hot tub is operated via an intuitive control panel. Refer to the specific markings on your panel for functions such as pump activation, lighting, and temperature adjustment.

Figure 4.1: The hot tub's digital control panel, used for managing jets, lighting, and temperature settings.

4.2 Jet Operation

Activate the 46 massage jets using the designated pump buttons on the control panel. Many jets can be individually adjusted or turned off to customize your massage experience and focus water flow where desired.

4.3 Control de temperatura

Use the 'Up' and 'Down' buttons on the control panel to set your desired water temperature. The hot tub will automatically heat the water to maintain this setting.

Il·luminació 4.4

The color therapy lighting can be cycled through various colors or set to a specific hue using the 'Light' button on the control panel.

5. Manteniment

5.1 Neteja de la superfície

Wipe the hot tub surface with a wet cloth. Always use a neutral cleaning product and a soft wiping cloth. Avoid abrasive tools, blades, or knives, as these may cause damage. Never use nail polish remover, acetone, or paint stripper for cleaning.

5.2 Manteniment del filtre

Regularly clean the superfine filter to ensure optimal water quality and circulation. Follow the manufacturer's instructions for filter removal, cleaning, and replacement.

Figure 5.1: Illustration of the hot tub's water purification system, featuring a superfine filter and ozone generator for clean water.

5.3 Química de l'aigua

The integrated Ozone generator assists in maintaining water sanitation. However, regular testing and balancing of water chemistry (pH, alkalinity, sanitizer levels) are crucial for bather comfort and equipment longevity. Consult a local spa professional for guidance on water treatment products.

5.4 Thermal Cover Care

Keep the thermal cover clean and in good condition to maximize heat retention and protect the hot tub from environmental elements. Periodically inspect for damage and ensure a tight seal.

6. Solució De Problemes

If you encounter any issues with your hot tub, please refer to the following general troubleshooting tips:

• Sense energia: Check the circuit breaker and GFCI. Ensure the power cord is securely plugged in.
• Els jets no funcionen: Verify that the pumps are activated. Some jets may have individual on/off controls. Check water level.
• Aigua sense calefacció: Confirm the desired temperature is set correctly. Ensure the thermal cover is properly in place. Check for error codes on the control panel.
• Aigua ennuvolada: Clean or replace the filter. Test and adjust water chemistry. Shock the water if necessary.

For persistent problems or complex issues, contact BUENOSPA customer support or a certified spa technician.

7. Especificacions

8. Garantia i assistència

For warranty information, customer support, or to report any issues, please refer to the contact details provided at the point of purchase or visit the official BUENOSPA website. Always provide your model number (WM00762) when seeking assistance.