SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Acabatview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outages.

Figura 1.1: Frontal view of the TM618 Timer Module.

2. Característiques clau

• Disseny compacte i que estalvia espai.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Configuració i instal·lació

3.1. Esquema de cablejat

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Instruccions de funcionament

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Configuració de l'hora actual

1. Premeu el botó RELOJ button and hold it.
2. Mentre aguanta RELOJ, premeu SETMANA per configurar el dia actual de la setmana.
3. Mentre aguanta RELOJ, premeu HORA per configurar l'hora actual.
4. Mentre aguanta RELOJ, premeu MIN per configurar el minut actual.
5. Allibera el RELOJ botó. L'hora ja està configurada.

4.2. Programació dels temps d'encesa/apagada

El temporitzador admet fins a 16 programes d'encesa/apagada. Cada programa consta d'una hora d'encesa i una hora d'apagada.

1. Premeu el botó PROG premeu el botó una vegada. La pantalla mostrarà "1 ON".
2. Premeu SETMANA to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Premeu HORA per configurar l'hora d'encesa desitjada.
4. Premeu MIN per ajustar el minut d'encesa desitjat.
5. Premeu PROG de nou. La pantalla mostrarà "1 OFF".
6. Repetiu els passos 2-4 per configurar el(s) dia(es), l'hora i el minut de desactivació desitjats per a aquest programa.
7. Premeu PROG to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press RECORDA mentre viewing the specific ON or OFF program you wish to clear.

4.3. Anul·lació manual

Premeu el botó MANUAL button to cycle through different operating modes:

• AUTO ON: The timer is currently ON and will follow the programmed schedule.
• APAGAT AUTOMÀTIC: The timer is currently OFF and will follow the programmed schedule.
• ACTIVITAT: The timer is forced ON, overriding any programs.
• DESACTIVAT: The timer is forced OFF, overriding any programs.

4.4. Recall Function

El RECORDA button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Manteniment

5.1. Cura de la bateria

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Neteja

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

6. Solució De Problemes

• La pantalla està en blanc: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review els horaris d'encesa/apagada programats per a més precisió.
• El temporitzador no respon als botons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Especificacions

7.1. Dimensions

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Garantia i Suport

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.