Manual d'instruccions del trepant magnètic EUROBOOR ECO.36+

1. Instruccions de seguretat importants

Llegiu i comprengui sempre tots els avisos de seguretat, instruccions, il·lustracions i especificacions que s'inclouen amb aquesta eina elèctrica. Si no segueix totes les instruccions que s'indiquen a continuació, es poden produir descàrregues elèctriques, incendis i/o lesions greus. Deseu tots els avisos i les instruccions per a futures consultes.

• Equips de protecció individual: Always wear appropriate safety glasses, hearing protection, and gloves when operating the drill.
• Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Ensure the power supply matches the tool's requirements (110 Volts, 9.5 Amps). Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
• Funcionament de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
• Base magnètica: Ensure the magnetic base is fully engaged on a clean, flat, ferromagnetic surface before starting the motor. The TempTec 2-Way Magnet engages at 50% capacity until the motor is switched on, reducing heat and extending machine life.
• Apagat automàtic: El GYRO-TEC safety feature automatically shuts off the motor with sudden displacement, acceleration, loss of magnetic force, or excessive vibration.
• Protecció d'energia: This drill includes Enhanced Power Protection against power fluctuations and surges, improving reliability in varying power supply conditions.

2. Producte acabatview

The EUROBOOR ECO.36+ is a low-profile magnetic drill press designed for efficient and precise drilling in various steel structures. Its compact size and powerful motor make it ideal for applications in confined spaces.

Image 1: The EUROBOOR ECO.36+ Magnetic Drill Press, showcasing el seu disseny compacte i la nansa integrada.

Característiques principals:

• Motor potent: 9.5A motor with a no-load speed of 700 RPM (400 RPM under 9.5A load).
• Annular Cut Capacity: 7/16" - 1-7/16" capacity.
• Base magnètica forta: 2645 lbs magnetic base force for secure attachment.
• Pro baixfile Disseny: Measures only 165 mm (6 1/2") in height, suitable for limited access areas.
• GYRO-TEC Automatic Shut-Off: Enhances safety by detecting sudden movements or loss of magnetic force.
• Enhanced Power Protection: Protects against power fluctuations and surges.
• TempTec 2-Way Magnet: Reduces energy consumption and heat, extending magnet life.

Imatge 2: Lateral view of the ECO.36+ highlighting key safety and operational features like GYRO-TEC, TempTec, and power protection.

3. Components i controls

Familiarize yourself with the various components and controls of your ECO.36+ magnetic drill press before operation.

Imatge 3: De dalt a baix view of the control panel, showing the motor and magnet switches.

Funcions del tauler de control:

• Motor ON/OFF Switch (Green/Red): The green button (labeled 'I' or '+') starts the drill motor. The red button (labeled 'O' or '-') stops the drill motor.
• Magnet ON/OFF Switch (Red Toggle): This switch controls the magnetic base. Position 'I' engages the magnet, securing the drill to the workpiece. Position 'O' disengages the magnet.
• Carbon Brush Wear Indicator: A small light or indicator (as shown in Image 2) that illuminates when the carbon brushes require replacement.

4. Configuració

4.1 Desembalatge i inspecció

Carefully remove the drill press from its packaging. Inspect the tool for any signs of damage that may have occurred during transit. Report any damage to your supplier immediately.

4.2 Fixació de la nansa

1. Locate the ratcheting feed handle.
2. Insert the handle into the designated socket on the side of the drill body.
3. Assegureu-vos que estigui ben subjectat.

4.3 Securing the Drill

1. Ensure the workpiece surface is clean, flat, and free of debris, rust, or paint to allow for maximum magnetic adhesion.
2. Position the magnetic drill press over the desired drilling location.
3. Engage the magnet by switching the Magnet ON/OFF switch to the 'I' position. Verify that the drill is firmly secured to the workpiece before proceeding. The TempTec magnet will engage at 50% power initially.

4.4 Annular Cutter Installation

1. Ensure the drill is disconnected from the power supply.
2. Insert the annular cutter into the arbor, ensuring the flats on the cutter shank align with the set screws in the arbor.
3. Tighten the set screws firmly with the provided hex key to secure the cutter.
4. Insert the pilot pin into the center of the annular cutter. The pilot pin helps center the cutter and eject the slug after drilling.

5. Funcionament

5.1 Comprovacions prèvies a l'operació

• Confirm the drill is securely attached to the workpiece.
• Verify the annular cutter and pilot pin are correctly installed and tightened.
• Assegureu-vos que tots els guàrdies de seguretat estiguin al seu lloc.
• Wear all required personal protective equipment.

5.2 Procediment de perforació

1. Connect the drill to a suitable power supply.
2. Engage the magnetic base by switching the Magnet ON/OFF switch to 'I'.
3. Press the green Motor ON button to start the drill motor. The TempTec magnet will now engage at full power.
4. Slowly feed the cutter into the workpiece using the feed handle. Apply steady, even pressure. Do not force the drill.
5. Apply cutting fluid or coolant as necessary to prolong cutter life and improve cutting performance.
6. Once the hole is complete, retract the cutter from the workpiece.
7. Press the red Motor OFF button to stop the motor.
8. Switch the Magnet ON/OFF switch to 'O' to disengage the magnetic base.
9. Carefully remove the drill from the workpiece.

Image 4: The ECO.36+ magnetic drill press securely attached to and drilling into an I-beam, demonstrating its application in structural steelwork.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your EUROBOOR ECO.36+.

6.1 Neteja general

• After each use, clean the drill press, especially the magnetic base and cutter area, to remove metal chips and debris.
• Use a dry cloth or soft brush. Do not use solvents that may damage plastic parts.

6.2 Substitució de les escombretes de carbó

When the carbon brush wear indicator illuminates, the carbon brushes need to be replaced. This should be performed by qualified personnel following the specific instructions in the full service manual.

6.3 Lubricació

Periodically check and lubricate moving parts as recommended in the comprehensive service manual to ensure smooth operation.

6.4 Emmagatzematge

Store the drill press in a clean, dry, and secure location, out of reach of children and unauthorized users.

7. Solució De Problemes

This section addresses common issues you might encounter with your ECO.36+.

8. Especificacions

Technical specifications for the EUROBOOR ECO.36+ Magnetic Drill Press.

Image 5: Technical drawing illustrating the dimensions of the EUROBOOR ECO.36+ magnetic drill press.

9. Garantia i Suport

EUROBOOR products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EUROBOOR weblloc.

For technical assistance, spare parts, or service inquiries, please contact EUROBOOR customer support through their official channels. Always provide your product model number (ECO.36+) and serial number when seeking support.