Victoper Headlamp Manual d'usuari

Introducció

Thank you for choosing the Victoper Headlamp. This super bright, rechargeable LED headlamp is designed for various outdoor activities, providing powerful illumination and versatile lighting options. This manual provides detailed instructions on its features, setup, operation, and maintenance to ensure optimal performance and longevity of your device.

Image: The Victoper Headlamp, espectacleasing its design with an adjustable strap and the multi-LED light array.

Característiques del producte

• Il·luminació súper brillant: Equipped with 18,000 lumens, featuring 4 advanced XPE lamp beads, 2 T6 lamp beads, and 2 COB lamp beads for powerful and wide-ranging light.
• Bateria de llarga durada: High-quality battery provides 7 to 8 hours of use on a full charge, with a fast charging time of 4 to 4.5 hours.
• 8 modes d'il·luminació: Two independent switches control various lighting combinations, including main lights, auxiliary lights, all lights on, flashing, strong white COB, weak white COB, bright red COB, and flashing red COB.
• Capçal ajustable a 90°: El lamp head can be rotated 90 degrees to direct light precisely where needed.
• Classificació impermeable IPX5: Designed to withstand splashes and rain, ensuring reliable performance even in wet conditions.
• Comfortable and Lightweight Design: Features super adjustable straps for maximum comfort and a balanced fit, suitable for various head sizes.

Image: Illustration demonstrating the headlamp's powerful 18,000 lumens output and a maximum beam range of 100 meters.

Imatge: El capçaleraamp covered in water droplets, highlighting its IPX5 waterproof, snowproof, dirtproof, and shockproof capabilities.

Configuració

1. Carregant el capamp

Abans del primer ús, carregueu completament el capçalamp. Locate the charging port, typically covered by a rubber flap for protection. Connect the provided USB charging cable to the headlamp and a suitable USB power source (e.g., wall adapter, power bank, computer USB port). The charging indicator light will show the charging status. A full charge takes approximately 4 to 4.5 hours.

Imatge: Un primer pla view del capamp's charging port, showing the signal light and power indicator, with a green LED indicating charging status.

2. Ajust de la diadema

El capamp features adjustable elastic straps for a comfortable and secure fit. Place the headlamp on your head and use the adjustable buckles to tighten or loosen the straps until it fits snugly without being too tight. Ensure the light unit is centered on your forehead.

Imatge: Una imatge detallada view del capamp, highlighting the adjustable loop buckle for strap adjustment and the location of the switch button.

Instruccions de funcionament

The Victoper Headlamp is equipped with two independent switches to control its various lighting modes.

1. Encendre/apagar

Press either the Right Switch or the Left Switch once to turn on the headlamp. Press and hold either switch for a few seconds to turn off the headlamp.

2. Canvi de modes

El capamp offers 8 distinct lighting modes, accessible via the two switches:

• Interruptor dret: Cycles through the primary white light modes. Each press changes the mode in the following sequence:
  • 2 Main Lights (T6)
  • 4 Auxiliary Lights (XPE)
  • All Lights On (2 T6 + 4 XPE)
  • Tots els llums parpellejant
• Interruptor esquerre: Cycles through the COB (Chip-on-Board) light modes, including white and red light options:
  • 2 COB Strong White Light
  • 2 COB Weak White Light
  • 2 COB Bright Red Light
  • 2 COB Flashing Red Light

You can use both switches independently to achieve different lighting combinations or to quickly access your desired mode.

Image: A visual guide to the 8 different lighting modes available, showing how each combination of LEDs illuminates.

Imatge: Una persona que porta el capamp, accompanied by a diagram illustrating the 90-degree adjustable head feature, allowing for precise light direction.

Manteniment

1. Neteja

Per netejar el capçalamp, gently wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the surface or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.

2. Emmagatzematge

Quan no l'utilitzeu durant períodes prolongats, guardeu el capçalamp in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to charge the battery every 3-6 months to maintain its health and prevent deep discharge.

3. Cura de la bateria

El capamp uses a built-in Lithium-polymer battery. Avoid completely draining the battery frequently, as this can reduce its lifespan. Always use the provided charging cable and a compatible USB power source. Do not attempt to replace the battery yourself.

Resolució de problemes

• Capamp no s'encén:
  • Ensure the battery is charged. Connect it to a power source and check the charging indicator.
  • Premeu i manteniu premut el botó d'engegada durant uns segons per assegurar-vos que no es prem només ràpidament.
• La llum és tènue o parpelleja:
  • The battery might be low. Recharge the headlamp plenament.
  • Ensure the lens is clean and free from dirt or debris.
• La durada de la bateria és més curta del que s'esperava:
  • Operating in higher brightness modes consumes more power. Try using lower brightness settings for longer runtime.
  • Assegureu-vos del capçalamp està completament carregat abans del seu ús.
  • Les temperatures extremes poden reduir temporalment el rendiment de la bateria.
• Charging indicator does not light up:
  • Check if the charging cable is securely connected to both the headlamp i la font d'energia.
  • Proveu un altre port USB o adaptador de corrent.
  • Ensure the charging port is clean and free of obstructions.

Especificacions