ELEGRP USB Charger Wall Outlet Instruction Manual

1. Introducció

This manual provides essential information for the safe installation, operation, and maintenance of your ELEGRP USB Charger Wall Outlet. Please read these instructions thoroughly before installation and retain them for future reference. This product is designed to provide both standard AC power outlets and convenient USB charging ports for various electronic devices.

2. Informació de seguretat

WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION CAN RESULT IN SERIOUS INJURY OR DEATH.

• Installation must be performed by a qualified electrician or a knowledgeable person in accordance with all national and local electrical codes.
• Desconnecteu sempre l'alimentació a l'interruptor automàtic o a la caixa de fusibles abans de la instal·lació o el manteniment.
• Feu servir només cable de coure. No l'utilitzeu amb cable d'alumini.
• Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.
• Aquest dispositiu només és per a ús interior.
• Do not exceed the maximum electrical ratings of the device.

Figura 2.1: The ELEGRP USB Charger Wall Outlet includes multiple protection features such as short circuit, overload, overvoltage, overcurrent, overheating, and undervoltage protection to safeguard connected devices.

Figura 2.2: Comparison demonstrating cooler operation of the ELEGRP outlet (left) versus a conventional outlet (right) under an 18W load, indicating advanced heat management for safety.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• USB Outlet with Screwless Wall Plate
• Manual d'instruccions d'instal·lació (aquest document)

Figura 3.1: A typical package containing multiple ELEGRP USB Charger Wall Outlets, each with a screwless wall plate.

4. Característiques del producte

• Càrrega d'alta velocitat: Integrated Type A and Type C USB ports with a total output of 4.2 Amp 5V DC. The Type C port provides a maximum of 3.0 Amp 5V DC, and the Type A port provides a maximum of 2.4 Amp 5V DC when used separately.
• USB Dedicated Charging Port Controller: Each USB port incorporates a protocol chip to optimize charging current for connected devices, ensuring stable and faster charging.
• TampPersianes resistents a l'er: Safety shutters are built into the AC outlets to prevent the insertion of foreign objects, enhancing child safety.
• Compatibilitat universal: USB ports are compatible with a wide range of devices including smartphones, tablets, e-readers, and gaming systems.
• Fàcil instal·lació: Supports both side wiring and back wiring for flexible installation. Screws are pre-loosened for convenience.

Figura 4.1: Diagram showing the internal USB dedicated charging port controller chip, highlighting tamper-resistant shutters, universal compatibility, flame-resistant material, and UL/cUL/FCC listings.

5. Instruccions d'instal·lació

Follow these steps carefully to install your ELEGRP USB Charger Wall Outlet:

1. Apagueu l'alimentació: Locate the circuit breaker or fuse box controlling the outlet you wish to replace. Turn off the power completely to prevent electric shock. Verify power is off using a voltage provador.
2. Elimina la presa antiga: Descargoleu i retireu amb cura la placa de paret i la presa de corrent existents de la caixa elèctrica. Desconnecteu els cables de la presa de corrent antiga.
3. Prepareu els cables: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the wires if necessary. Ensure wires are straight and free of nicks.
4. Connecteu els cables: The ELEGRP USB Charger Wall Outlet supports both side wiring and back wiring. Refer to the diagram below for proper connections.
   • Green Screw: Connect the ground wire (bare copper or green insulated).
   • Silver Screws: Connect the neutral wire (white insulated).
   • Brass Screws: Connect the hot wire (black insulated).
   Ensure all connections are tight. For back wiring, insert the wire fully into the terminal hole and tighten the screw. For side wiring, loop the wire clockwise around the screw and tighten.
5. Mount New Outlet: Carefully fold the wires into the electrical box. Insert the new ELEGRP outlet into the box and secure it with the mounting screws.
6. Instal·leu la placa de paret: Fixeu la placa de paret sense cargols sobre la presa de corrent.
7. Restaura l'alimentació: Torneu a connectar l'alimentació a l'interruptor o a la caixa de fusibles.
8. Prova: Test both the AC outlets and the USB ports to ensure proper functionality.

Figura 5.1: Detailed wiring diagrams for both side wiring (12AWG & 14AWG) and back wiring (12AWG & 14AWG) configurations, showing connections for brass (hot), silver (neutral), and green (ground) screws. The diagram illustrates connections for both single and multiple cable entries into the electrical box.

6. Instruccions de funcionament

Using your ELEGRP USB Charger Wall Outlet is straightforward:

• Preses de CA: Plug any standard electrical appliance or device into the two AC receptacles. Ensure the device's power requirements do not exceed the outlet's rating.
• Ports de càrrega USB: Connect your USB-powered devices directly to the Type A or Type C USB ports using a compatible charging cable. The intelligent charging chip will detect your device and deliver optimal power for efficient charging.

Figura 6.1: Comparison of charging times for various devices using ELEGRP Smart Chip technology versus standard 1 Amp charging, demonstrating faster charging capabilities.

Figura 6.2: Illustration of various devices compatible with the USB charging ports, including iPads, phones, cameras, power banks, sound devices, headsets, watches, and gaming consoles.

Figura 6.3: Image showing a tablet and phone charging directly from the USB ports of the wall outlet, illustrating the convenience of not needing bulky USB adapters.

Figura 6.4: Scenes depicting the outlet in use: a person sleeping peacefully with a phone charging noise-free, and a couple relaxing while charging devices, emphasizing quiet operation.

7. Manteniment

To ensure the longevity and proper function of your outlet:

• Netegeu la superfície amb un drap suau i sec. No utilitzeu netejadors abrasius ni dissolvents.
• Periodically check for any loose connections or damage. If damage is found, turn off power at the breaker and have the outlet inspected by a qualified electrician.
• No intenteu desmuntar o reparar la unitat vosaltres mateixos.

8. Solució De Problemes

If you encounter issues with your ELEGRP USB Charger Wall Outlet, consider the following:

• No Power to AC Outlets or USB Ports:
  • Comproveu l'interruptor o la caixa de fusibles per assegurar-vos que hi ha corrent.
  • Verify that the outlet is properly wired and all connections are secure (refer to Section 5).
• Càrrega lenta per USB:
  • Assegureu-vos que feu servir un cable USB d'alta qualitat.
  • Some devices may have specific charging requirements. While the outlet optimizes output, extremely demanding devices might charge slower if their maximum input exceeds the port's output.
  • If multiple devices are charging simultaneously, the total output is shared, which may reduce individual port speeds.
• Device Not Recognized by USB Port:
  • Prova amb un cable USB diferent.
  • Test with a different device to isolate the issue.
• Outlet Feels Warm:
  • It is normal for electrical outlets to feel slightly warm during operation, especially when charging multiple devices or high-power devices. If the outlet becomes excessively hot, turn off power at the breaker and consult a qualified electrician.

9. Especificacions

10. Garantia i Suport

ELEGRP products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official ELEGRP weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.