Manual d'instruccions del subwoofer amplificat segellat Kanto SUB8VMW

1. Introducció

Thank you for choosing the Kanto SUB8VMW Sealed Powered Subwoofer. This manual provides essential information for the safe and optimal use of your subwoofer. Please read these instructions thoroughly before installation and operation, and retain them for future reference.

The Kanto SUB8VMW is designed to deliver accurate and powerful low-frequency sound, enhancing your audio experience in a compact form factor. Its sealed enclosure ensures precise bass reproduction with minimal distortion, making it suitable for various audio setups and environments.

2. Instruccions de seguretat

Per reduir el risc de descàrrega elèctrica, incendi o lesions, seguiu sempre aquestes precaucions de seguretat bàsiques:

• Font d'alimentació: Connect the subwoofer only to an AC power outlet that matches the voltage specified on the unit. Ensure the power cord is not pinched or walked on.
• Ventilació: Do not block any ventilation openings. Allow adequate space around the subwoofer for proper airflow to prevent overheating.
• Aigua i humitat: Do not expose the subwoofer to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the unit.
• Fonts de calor: Keep the subwoofer away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplificadors) que produeixen calor.
• Neteja: Unplug the subwoofer from the wall outlet before cleaning. Use only a dry cloth for cleaning.
• Manteniment: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltage o altres perills.
• Col·locació: Place the subwoofer on a stable, level surface to prevent it from falling. Avoid placing it in direct sunlight or near strong magnetic fields.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al vostre paquet:

• Subwoofer alimentat segellat Kanto SUB8VMW
• Cable d'alimentació
• Rubber Feet (pre-installed or to be attached)
• Manual d'usuari (aquest document)

Note: The subwoofer features MDF construction, a metal grill, and a vinyl finish.

4. Producte acabatview

Familiarize yourself with the main components and controls of your Kanto SUB8VMW subwoofer.

Figure 4.1: Front Panel Features

• Reixa protectora: Covers and protects the woofer.
• 8" Driver: The speaker cone responsible for producing low-frequency sound.
• 300 Watts (Peak Power): Indicates the maximum power output capability.
• Sealed MDF Enclosure: The cabinet design, which contributes to accurate bass reproduction.

Figure 4.2: Rear Panel Controls and Connections

• Control de nivell de volum: Ajusta el nivell de sortida general del subwoofer.
• Freqüència d'encreuament: Sets the upper frequency limit for the subwoofer, determining where it blends with your main speakers. Adjustable from 40Hz to 120Hz.
• Standby Power Switch: Selects power mode (On, Auto, Off).
• Interruptor de fase: Adjusts the phase of the subwoofer output (0° or 180°) to match your main speakers.
• Line Level Input (RCA): Connects to the subwoofer output of your amplificador o receptor.
• Interruptor d'alimentació: Interruptor principal d'alimentació de la unitat.
• Entrada d'alimentació CA: Connecta el cable d'alimentació.

5. Configuració

5.1 Col·locació

The placement of your subwoofer can significantly impact its performance. Consider the following:

• Acústica de l'habitació: Experiment with different locations in your room. Corner placement often accentuates bass, while placement along a wall can provide a more balanced response.
• Posició d'escolta: The "subwoofer crawl" method can help: place the subwoofer at your primary listening position, play bass-heavy music, and then crawl around the room to find where the bass sounds best. That spot is often ideal for the subwoofer.
• Proximity to Main Speakers: While low frequencies are less directional, placing the subwoofer relatively close to your main speakers can improve sonic integration.
• Disseny compacte: The SUB8VMW's compact size (approximately 11" in each direction) allows for flexible placement, including under desks or in smaller living spaces.

Figura 5.1: Example Placement in a Living Space

5.2 Connexions

Before making any connections, ensure the subwoofer and all connected audio equipment are powered off and unplugged from the wall outlet.

1. Connect to Receiver/Ampmés viu: Use an RCA cable to connect the "Sub Out" or "LFE Out" port on your receiver or amplifier to the "Sub In" (L/R) input on the Kanto SUB8VMW. If your receiver has a single LFE output, you can connect it to either the L or R input on the subwoofer, or use a Y-adapter for potentially stronger signal.
2. Connexió d'alimentació: Once audio connections are secure, connect the supplied power cord to the AC Power Inlet on the subwoofer and then to a suitable wall outlet.

Figure 5.2: Easy Integration with Existing Systems

6. Instruccions de funcionament

After setup, power on your subwoofer and connected audio equipment. Adjust the settings for optimal performance.

• Encès: Flip the main Power Switch on the rear panel to the "ON" position.
• Potència en espera:
  • ACTIVITAT: Subwoofer remains continuously on.
  • AUTOMÀTIC: Subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
  • DESACTIVAT: Subwoofer remains off.
• Control de nivell de volum: Start with the volume control at a low setting. Play some music or movie content and gradually increase the subwoofer volume until it blends seamlessly with your main speakers. The subwoofer should enhance the bass without overpowering the overall sound.
• Freqüència d'encreuament: This control determines the highest frequency the subwoofer will reproduce.
  • If your main speakers are small (e.g., bookshelf speakers), set the crossover higher (e.g., 80Hz - 100Hz) to allow the subwoofer to handle more of the mid-bass.
  • If your main speakers are larger (e.g., floor-standing speakers), set the crossover lower (e.g., 40Hz - 60Hz) as they can reproduce more low frequencies themselves.
  • Experiment to find the best blend.
• Interruptor de fase (0°/180°): This switch helps ensure the subwoofer's sound waves are in sync with your main speakers.
  • Play music with a strong, consistent bass line.
  • Alterna el selector de fase entre 0° i 180°.
  • Choose the setting that produces the loudest and most impactful bass at your listening position.

7. Manteniment

Proper care will ensure the longevity and performance of your Kanto SUB8VMW subwoofer.

• Neteja: Use a soft, dry cloth to wipe the exterior surfaces. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish.
• Pols: Regularly dust the grille and cabinet to prevent dust buildup, which can affect performance and aesthetics.
• Ventilació: Ensure that the ventilation openings are clear of obstructions.
• Emmagatzematge: If storing the subwoofer for an extended period, unplug it from the power outlet and store it in a cool, dry place, protected from dust and extreme temperatures.

8. Solució De Problemes

Si teniu problemes amb el subwoofer, consulteu els problemes i solucions més comuns següents:

9. Especificacions

Figura 9.1: Dimensions del producte

10. Informació de la garantia

The Kanto SUB8VMW Sealed Powered Subwoofer comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Kanto weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

11. Suport

For further assistance, technical support, or to inquire about replacement parts, please contact Kanto customer support:

• Weblloc: Visita el Botiga Kanto a Amazon per obtenir informació sobre el producte i recursos d'assistència.
• Contacte: Refer to the contact information provided in your product packaging or on the official Kanto website for direct support channels.