1. Introducció i finalview
The RCF ART 935-A is a high-performance digital 2-way active speaker designed for intensive audio applications. It combines advanced transducer technology with a powerful amplifier to deliver exceptional sound quality and versatility.
Figura 1.1: Frontal view of the RCF ART 935-A active speaker, showcasing its robust black enclosure and front grille.
Les característiques clau inclouen:
- Up to 133 dB Sound Pressure Level
- 2100W Class-D Bi-Amplificació
- 45-20000 Hz linear frequency response
- 3" Titanium/Neodymium Compression Driver
- 15" Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Figure 1.2: Close-up of the speaker's internal components, highlighting the 15-inch woofer and the 3-inch compression driver.
The ART 935-A is suitable for use as a stand-alone FOH system speaker, satellite with a subwoofer, stage monitor, or flown installation, offering high performance and reliability in a compact enclosure.
2. Informació de seguretat
Please read and understand all safety instructions before operating the RCF ART 935-A speaker. Retain this manual for future reference.
- Seguretat elèctrica: Aquesta unitat conté un alt volumtage. To prevent electrical shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Font d'alimentació: Connect the speaker only to a power supply of the type described in this manual and marked on the unit.
- Cable d'alimentació: Eviteu que el cable d'alimentació sigui trepitjat o pessigat, especialment als endolls, els endolls i el punt on surten de l'aparell.
- Ventilació: Ensure adequate ventilation around the speaker. Do not block any ventilation openings.
- Col·locació: Place the speaker on a stable, level surface or mount it securely using appropriate rigging hardware. Avoid placing near heat sources or in direct sunlight.
- Protecció auditiva: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.
- Humitat: Do not expose the speaker to rain or moisture. Do not use near water.
⚠ CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER.
3. Configuració
Follow these steps to set up your RCF ART 935-A speaker:
3.1 Desembalatge
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. The box should contain: RCF ART 935-A Digital 2-Way Active Speaker, Power Cord, and this User Manual.
3.2 Physical Placement and Mounting
The ART 935-A is designed for versatile placement. It can be used on a pole, flown, wall-mounted, or truss-mounted. Ensure any mounting hardware used is rated for the speaker's weight (approximately 53.2 pounds / 24.2 kg).
Figura 3.1: lateral view of the speaker, illustrating its ergonomic design for handling and placement.
Figura 3.2: A baix view, highlighting the integrated pole mount for stand placement.
3.3 Connexions
Locate the input/output panel on the rear of the speaker.
Figure 3.3: Rear panel of the speaker, displaying the balanced input/link, volume control, and preset buttons.
- Connexió d'alimentació: Connecteu el cable d'alimentació subministrat a l'entrada de CA del panell posterior i després a una presa de corrent adequada.
- Entrada d'àudio: Use an XLR cable to connect your audio source (mixer, audio interface, etc.) to the "BALANCED INPUT/LINK" XLR input.
- Audio Link (Daisy Chain): If connecting multiple speakers, use an XLR cable from the "BALANCED INPUT/LINK" XLR output to the input of the next speaker.
4. Instruccions de funcionament
Once the speaker is set up, you can begin operation.
Figura 4.1: Detallada view of the control panel, including the volume control and preset selection.
4.1 Controls i indicadors
- Botó de VOLUM: Adjusts the overall output level of the speaker. Turn counter-clockwise for minimum volume (-∞) and clockwise for maximum volume (MAX).
- PRESETS Button: Cycles through different audio equalization presets.
- LINEAL: Flat frequency response, suitable for general use or when external EQ is applied.
- IMPULS: Enhances bass and treble frequencies, often used for music playback.
- STAGE: Optimized for stagaplicacions de monitorització electrònica, reduint l'acumulació de baixa freqüència.
- LED DE SENYAL: Illuminates when an audio signal is present at the input.
- OVERLOAD LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to prevent distortion.
4.2 Engegada/apagada
- Ensure the VOLUME knob is set to minimum (-∞).
- Connecteu el cable d'alimentació.
- Gireu l'interruptor d'alimentació a la posició "ON".
- Gradually increase the VOLUME to the desired level.
- To power off, reduce the VOLUME to minimum, then flip the power switch to "OFF".
5. Manteniment
Proper maintenance ensures the longevity and optimal performance of your RCF ART 935-A speaker.
- Neteja: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or waxes. For the grille, a soft brush or vacuum cleaner can be used to remove dust.
- Inspecció: Periodically check all cables for damage. Ensure all connections are secure.
- Emmagatzematge: When not in use for extended periods, store the speaker in a dry, cool environment, ideally in its original packaging or a protective case.
- No hi ha peces reparables per l'usuari: Do not attempt to open the speaker enclosure. All internal servicing must be performed by qualified RCF service personnel.
6. Solució De Problemes
If you encounter issues with your RCF ART 935-A speaker, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so |
|
|
| Distorted sound / OVERLOAD LED lit |
|
|
| L'altaveu no s'encén |
|
|
For issues not listed here, or if the problem persists after attempting the solutions, please contact RCF customer support or an authorized service center.
7. Especificacions
Detailed technical specifications for the RCF ART 935-A Digital 2-Way Active Speaker:
| Característica | Especificació |
|---|---|
| Nom del model | ART935-A |
| Tipus d'altaveu | 2-Way Active Speaker (Satellite, Woofer) |
| Amplificació | 2100W Class-D Bi-Amplification (Peak Power) |
| Diàmetre del woofer | 15 polzades |
| Diàmetre del Tweeter | 3 Inches (Titanium/Neodymium Compression Driver) |
| Resposta de freqüència | 45-20000 Hz (linear) |
| Sound Pressure Level (Max) | Fins a 133 dB |
| Tecnologia de connectivitat | XLR (Balanced Input/Link) |
| Mètode de control | Voice (Presets) |
| Color | Negre |
| Dimensions del producte (amplada x alçada) | 16.34 cm d'amplada x 28.23 cm d'alçada |
| Pes de l'article | 53.2 lliures (24.2 quilograms) |
| Tipus de muntatge | Wall Mount, Pole Mount (multiple rigging points) |
| Components inclosos | RCF ART 935-A Digital 2-Way Active Speaker, Power Cord |
| Característiques especials | FiRPHASE zero degrees phase technology, Bass Motion Control woofer excursion management |
8. Garantia i Suport
The RCF ART 935-A Digital 2-Way Active Speaker comes with a RCF 3 Year Limited WarrantySi us plau, conserveu el comprovant de compra per a reclamacions de garantia.
For technical support, service, or warranty inquiries, please contact RCF customer service or visit the official RCF website. Ensure you have your product model number (ART935-A) and serial number (if applicable, e.g., UDXU01335) ready when contacting support.
The serial number UDXU01335 is located on the rear panel of the speaker, near the input/output connections.
