1. Producte acabatview
The Flysky FS-R6B is a compact and reliable 6-channel 2.4GHz AFHDS (Automatic Frequency Hopping Digital System) receiver. It is designed to provide stable and long-range communication for various remote-controlled models, including fixed-wing aircraft, gliders, helicopters, and RC crawlers. This receiver is an essential component for establishing a robust link between your Flysky transmitter and your RC model's control surfaces.
Image showing two Flysky FS-R6B 6-channel receivers, each with an antenna and a bind plug. The receivers are compact, black units with multiple pin connectors.
2. Especificacions tècniques
Below are the detailed specifications for the Flysky FS-R6B receiver:
| Característica | Especificació |
|---|---|
| Canals | 6 canals |
| Freqüència | 2.4 GHz |
| Sistema | AFHDS (Automatic Frequency Hopping Digital System) |
| Modulació | GFSK |
| Sensibilitat del receptor | -100 dBm |
| Entrada de potència | 4.5 V - 6 V CC |
| Longitud de l'antena | 26 mm |
| Dimensions (L x A x A) | 1.5 x 0.51 x 0.91 polzades (38.1 x 12.95 x 23.11 mm) |
| Pes | 0.64 unces (18.14 grams) |
| i-BUS Port | No |
| Data Acquisition Port | No |
Diagram illustrating the key specifications of the Flysky FS-R6B receiver, including 6 channels, 2.4GHz AFHDS system, GFSK modulation, 26mm antenna length, and 4.5-6V power requirement.
3. Setup and Binding
3.1 Identificació de components
Familiarize yourself with the receiver's ports and indicators:
- CH1-CH6: Channel outputs for connecting servos, ESCs, etc.
- BAT: Battery port, also used for binding.
- Indicador LED: Shows power status and binding mode.
Detallada view of the Flysky FS-R6B receiver showing its dimensions (45mm length, 20mm width, 13mm height) and the arrangement of its 6 channels plus BAT port.
3.2 Procediment vinculant
Binding is the process of linking the receiver to your transmitter, allowing them to communicate. Follow these steps carefully:
- Install batteries in the transmitter and turn it apagat.
- Connect the binding jumper (bind cable) to the BAT port of the receiver.
- Connect the battery of the receiver to any channel power supply (e.g., CH3 or CH4). The red LED on the receiver will blink, indicating it is in binding mode.
- Press and hold the bind key (or bind button) on your transmitter and turn it on.
- The red LED of the receiver should stop blinking and remain solid, meaning a successful binding.
- Desconnecteu la bateria del receptor.
- Turn off then turn back on the transmitter.
- Connect all the servos to the receiver and then connect its battery.
- Check if all servos are working as expected by moving the transmitter sticks.
- Si hi ha alguna cosa malament, reinicieu aquest procediment des del principi.
Step-by-step visual guide on how to bind the Flysky FS-R6B receiver, illustrating the connection of the bind cable to the BAT port and the LED indicator.
4. Operation and Compatibility
4.1 Compatible Transmitters
The Flysky FS-R6B receiver is compatible with a wide range of Flysky AFHDS transmitters. Ensure your transmitter supports the AFHDS protocol for proper operation.
Visual chart displaying various Flysky transmitters compatible with the FS-R6B receiver, including models like FS-i6X, FS-i6, FS-i10, FS-TH9X, FS-GT2 series, and FS-T6.
4.2 Notes d'ús
- Always ensure the receiver is securely mounted in your model to prevent vibrations from affecting performance.
- Keep the antenna away from metal parts and carbon fiber to maximize signal range.
- Connect servos and ESCs to the correct channels as per your model's requirements and transmitter setup.
- Perform a range check before flying or operating your model to ensure reliable control.
5. Cura i Manteniment
Proper care will extend the life of your FS-R6B receiver:
- Mantenir sec: Avoid exposing the receiver to moisture or humidity, as this can damage internal electronics.
- Neteja: Periodically clean the receiver with a soft, dry cloth. Do not use solvents or harsh chemicals.
- Temperatura: Store and operate the receiver within recommended temperature ranges. Extreme heat or cold can affect performance.
- Protecció física: Protect the receiver from physical shocks and vibrations. Consider using foam or rubber mounting to absorb impacts.
- Cura de l'antena: Do not bend or cut the antenna. Ensure it is routed correctly and not pinched.
6. Guia de resolució de problemes
If you encounter issues with your FS-R6B receiver, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El LED del receptor no s'il·lumina | No power or incorrect power connection. | Comproveu la connexió i el volum de la bateriatage. Ensure power leads are connected correctly (positive to positive, negative to negative). |
| Receiver LED blinking rapidly (not binding) | Binding procedure not followed correctly. | Repeat the binding procedure carefully, ensuring the bind plug is in the BAT port and the transmitter is in bind mode. |
| No control response after binding | Servos/ESCs not connected correctly; transmitter not bound; incorrect channel assignment. | Verify all connections. Re-bind the receiver. Check your transmitter's channel assignment settings. |
| Erratic control or short range | Interference; damaged antenna; receiver too close to noisy electronics. | Ensure antenna is fully extended and not damaged. Relocate receiver away from motors, ESCs, or other sources of electrical noise. Avoid operating near strong Wi-Fi signals or other 2.4GHz devices. |
| Receiver gets hot | Overload; faulty component. | Consulteu el voltage input to ensure it's within the 4.5-6V range. Disconnect and re-test. If the issue persists, discontinue use and contact support. |
7. Informació de la garantia
Specific warranty terms for the Flysky FS-R6B receiver are typically provided by the seller or manufacturer at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your product or contact the seller directly.
8. Atenció al client
For further assistance, technical support, or inquiries regarding the Flysky FS-R6B receiver, please contact the seller or manufacturer (RCmall) through their official support channels. Providing your product model number (FS-R6B) and any relevant purchase details will help expedite your support request.
You can often find support contact information on the seller's website or through the platform where the product was purchased.
