Producte acabatview
The Zehnder Round Wall Mounting Tube is specifically designed for the installation of a ComfoSpot 50 ventilation unit into an exterior wall. Constructed from special, dimensionally stable plastic, this tube ensures a secure and precise fit for your ventilation system.
It comes equipped with two end caps to protect the tube from dirt and the exterior wall opening from weather influences prior to the final installation of the ComfoSpot 50 unit.
Image: The Zehnder Round Wall Mounting Tube, a black cylindrical plastic component, shown with one end cap in place. This tube is essential for integrating the ComfoSpot 50 ventilation unit into a wall structure.
Configuració i instal·lació
This section provides general guidelines for the installation of the Zehnder Round Wall Mounting Tube. Professional installation is recommended for optimal performance and safety.
- Prepareu l'obertura a la paret: A core drill hole with an appropriate diameter (approximately 315 mm) must be created in the exterior wall where the ComfoSpot 50 unit will be installed. Ensure the hole is clean and free of debris.
- Insert the Mounting Tube: Carefully insert the Zehnder Round Wall Mounting Tube into the prepared core drill hole. The tube should extend through the wall construction to the ready-to-use wall surface.
- Assegureu el tub: Ensure the tube is securely seated and properly aligned within the wall opening. Depending on the wall material and construction, additional sealing or fixing materials may be required (not included).
- Apply End Caps: Before the final installation of the ComfoSpot 50 unit, use the two included end caps to seal both ends of the tube. This protects the interior of the tube from dirt, dust, and moisture, and the exterior wall opening from weather exposure during construction or waiting periods.
- Instal·lació final: Once the wall construction is complete and the ComfoSpot 50 unit is ready for installation, remove the end caps. Proceed with the installation of the ComfoSpot 50 unit according to its specific instruction manual, integrating it with the installed wall mounting tube.
Instruccions de funcionament
The Zehnder Round Wall Mounting Tube is a passive component designed to facilitate the installation of the ComfoSpot 50 ventilation unit. It does not require active operation. Its function is to provide a stable and protected conduit for the ventilation system through the wall.
Manteniment
Due to its durable plastic construction and passive role, the Zehnder Round Wall Mounting Tube requires minimal maintenance. Once installed, it is generally maintenance-free.
- Inspecció periòdica: During routine maintenance of the ComfoSpot 50 ventilation unit, visually inspect the tube's interior for any obstructions or damage.
- Neteja: If necessary, the interior of the tube can be gently cleaned with a soft brush or cloth to remove any accumulated dust or debris. Avoid using harsh chemicals or abrasive materials.
Resolució de problemes
As a static installation component, the Zehnder Round Wall Mounting Tube typically does not experience operational issues. Most problems would relate to installation or external factors.
- Difficulty Inserting Tube: Ensure the core drill hole is of the correct diameter (315 mm) and free of debris. Do not force the tube; re-evaluate the opening.
- Tube Not Secure: Verify that the tube is properly seated. If necessary, consult a professional for advice on securing the tube within the specific wall construction.
- Damage to Tube: If the tube is visibly damaged (cracked, bent), it should be replaced to ensure proper function and sealing for the ComfoSpot 50 unit.
Especificacions
| Atribut | Detall |
|---|---|
| Fabricant | Zehnder |
| Número de model | 527005440 |
| Tipus de producte | Round Wall Mounting Tube |
| Compatibilitat | Zehnder ComfoSpot 50 ventilation unit |
| Material | Special Dimensionally Stable Plastic |
| Diàmetre exterior | 315 mm |
| Longitud | 600 mm |
| Accessoris inclosos | 2 x Tapes d'extrem |
| ASIN | B09HDZ42TK |
| Data de primera disponibilitat | 20 de juny de 2022 |
Informació de la garantia
Specific warranty information for the Zehnder Round Wall Mounting Tube (Model 527005440) is not provided in the product details. Please refer to the official Zehnder website or contact your point of purchase for detailed warranty terms and conditions.
Suport i Contacte
For technical support, installation queries, or further information regarding the Zehnder Round Wall Mounting Tube or compatible ComfoSpot 50 units, please contact Zehnder customer service or visit their official weblloc.
You may also refer to the documentation provided with your Zehnder ComfoSpot 50 ventilation unit for comprehensive support details.
