Sunset Trading ED-SK100-170-7P

Sunset Trading Gray Trestle 7-Piece Extendable Dining Set

Model: ED-SK100-170-7P

1. Introducció

This instruction manual provides comprehensive guidance for the assembly, operation, and maintenance of your Sunset Trading Gray Trestle 7-Piece Extendable Dining Set. This set includes one rectangular extendable dining table and six upholstered side chairs, designed to offer both functionality and a transitional aesthetic. Please read all instructions carefully before beginning assembly or use to ensure proper setup and longevity of your furniture.

2. Informació de seguretat

Always check the instructions manual for specific safety guidelines.

  • Assegureu-vos que tots els components estiguin ben subjectats abans d'utilitzar-los.
  • No permeteu que els nens pugin als mobles.
  • Place the dining set on a level surface to prevent tipping.
  • Use adjustable floor protectors to prevent damage to flooring.
  • Mantingueu les peces petites allunyades dels nens durant el muntatge.

3. Contingut del paquet

Your Sunset Trading Gray Trestle 7-Piece Extendable Dining Set package should contain the following items:

  • 1 x Extendable Dining Table (with two 12-inch self-storing leaves)
  • 6 x Upholstered Side Chairs
  • Assembly Hardware (bolts, washers, nuts, Allen wrench, etc.)
  • Manual d'instruccions

Please inspect all components upon receipt. If any parts are missing or damaged, contact customer support immediately.

Complete Sunset Trading Gray Trestle 7-Piece Dining Set

Imatge 3.1: acabatview of the 7-piece dining set, including the extendable table and six upholstered chairs.

4. Muntatge i muntatge

Assembly of the Sunset Trading Gray Trestle Dining Set requires two adults. Follow these general steps for assembly. Refer to the specific assembly diagrams included with your hardware package for detailed instructions.

4.1. Muntatge de la taula

  1. Unpack all table components and lay them on a soft, clean surface to prevent scratches.
  2. Attach the trestle bases to the table's support structure using the provided hardware. Ensure all bolts are finger-tightened initially.
  3. Secure the metal trestle bar between the two trestle bases.
  4. Carefully place the tabletop onto the assembled base, aligning the pre-drilled holes.
  5. Attach the tabletop to the base using the remaining hardware.
  6. Once all components are aligned, fully tighten all bolts with the Allen wrench. Do not overtighten.
  7. Install the adjustable floor protectors on the bottom of the table legs.
Sunset Trading Trestle Dining Table extended

Image 4.1: The extendable dining table in its fully extended configuration, showcasing the trestle base and planked wood top.

Detail of the Trestle Base on the Dining Table

Imatge 4.2: Primer pla view of the X-frame trestle base and the connecting metal bar, highlighting the industrial design elements.

4.2. Muntatge de la cadira

  1. Unpack all chair components. Each chair typically consists of a backrest, seat, and four legs.
  2. Fixeu el respatller a l'estructura del seient.
  3. Attach the front and back legs to the seat frame.
  4. Assegureu-vos que totes les connexions siguin segures i estables.
  5. Premeu completament tots els cargols.
Two Sunset Trading Upholstered Side Chairs

Image 4.3: Two upholstered side chairs, showing the mission-style slat back and cushioned seat.

Close-up of Chair Upholstery and Backrest

Image 4.4: Detail of the chair's cushioned seat upholstered in durable polyester fabric and the curved slat backrest.

5. Instruccions de funcionament

The Sunset Trading Gray Trestle Dining Table features a convenient extendable design with two self-storing leaves.

5.1. Extending the Table

  1. Gently pull the two halves of the tabletop apart from the center. The table is designed to slide smoothly.
  2. Locate the self-storing 12-inch leaves hidden within the table structure.
  3. Lift and position one or both leaves into the gap created by separating the table halves.
  4. Push the tabletop halves back together until they are flush with the inserted leaf(s) and securely locked.

5.2. Retracting the Table

  1. Separate the tabletop halves.
  2. Remove the inserted leaf(s) and store them back in their designated self-storing compartments.
  3. Push the tabletop halves back together until they meet in the center and are securely locked.
Tres stages of the extendable dining table

Image 5.1: Visual representation of the dining table in its three size configurations: closed, with one leaf, and with two leaves.

6. Manteniment i cura

Proper care will help maintain the beauty and longevity of your dining set.

  • Neteja: Clean the wood surfaces with furniture polish and wipe with a lint-free cloth. Avoid harsh chemicals or abrasive cleaners.
  • Cura de la tapisseria: The chair upholstery is made of durable, easy-to-clean 100% polyester fabric. Spot clean with a mild detergent and damp tela segons sigui necessari.
  • Protecció: Use coasters and placemats to protect the tabletop from spills and heat.
  • Factors ambientals: Avoid placing furniture in direct sunlight or near heat sources, as this can cause fading or warping. Maintain consistent humidity levels in the room.
  • Ajust de la ferramenta: Reviseu i estrenyeu periòdicament totes les connexions de maquinari per garantir l'estabilitat.
Close-up of distressed gray planked wood tabletop texture

Imatge 6.1: Detallada view of the distressed gray finish and planked wood texture on the tabletop.

7. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el vostre conjunt de menjador.

7.1. Table Wobbles

  • Assegureu-vos que la taula estigui sobre una superfície plana.
  • Check that all assembly bolts are securely tightened.
  • Adjust the floor protectors on the table legs to stabilize the unit.

7.2. Chairs Feel Unstable

  • Verify that all chair assembly bolts are fully tightened.
  • Ensure the chair is placed on a flat, even surface.

7.3. Difficulty Extending/Retracting Table

  • Assegureu-vos que no hi hagi deixalles que obstrueixin el mecanisme de lliscament.
  • Apply a silicone-based lubricant to the sliding tracks if movement is stiff.
  • Confirm that the leaves are correctly aligned and inserted.

8. Especificacions

CaracterísticaDetall
MarcaSunset Trading
Número de modelED-SK100-170-7P
MaterialAcacia Wood, Pine Wood
ColorGris
Característica especialExpandable (3 Sizes)
Table Dimensions (Closed)30" d'alçada x 42" de profunditat x 72" d'amplada
Table Dimensions (1 Leaf)30" d'alçada x 42" de profunditat x 84" d'amplada
Table Dimensions (2 Leaves)30" d'alçada x 42" de profunditat x 96" d'amplada
Gruix de la taula1.75"
Pes de la taula174 lliures
Dimensions de la cadira40" d'alçada x 25.5" de profunditat x 20" d'amplada
Chair Seat Dimensions20" d'alçada x 18" de profunditat x 20" d'amplada
Capacitat de pes de la cadira350 lliures
Pes total de l'article306 pounds (approximate for full set)
UPC605832243078

9. Garantia i Suport

For information regarding warranty coverage, replacement parts, or customer support, please refer to the documentation provided at the point of purchase or visit the official Sunset Trading website. You may also contact the seller, Bison Commerce, for assistance with your purchase.

Fabricant: Sunset Trading

Venedor: Bison Commerce

Documents relacionats - ED-SK100-170-7P

Preview Sunset Trading Table Assembly Instructions CR-K92070-4348
Step-by-step assembly instructions for the Sunset Trading Table, model CR-K92070-4348. Includes parts list, hardware details, and important safety notes for easy setup.
Preview Finder 7P 系列電湧保護裝置 (SPD) - 產品型錄
Finder 7P 系列電湧保護裝置 (SPD) 的詳細產品型錄,包含技術規格、安裝範例、訂購資訊,適用於各種電氣系統和應用。
Preview Motion eDrive Mk1 & Mk2 Parts List | Motion Healthcare
Detailed parts list for the Motion eDrive Mk1 and Mk2 mobility scooters, including part numbers and descriptions from Motion Healthcare.
Preview Finder SERIA 7P: Dispozitive de Protecție la Supratensiune Tranzitorie (Descărcătoare)
Ghid tehnic complet pentru dispozitivele de protecție la supratensiune tranzitorie (descărcătoare) Finder SERIA 7P, incluzând tipuri 1, 1+2, 2, 3, pentru aplicații fotovoltaice, Ethernet și alte sisteme, cu specificații tehnice detaliate și exemple de instalare.
Preview Manual d'usuari de l'ordinador industrial ED-IPC2600
Manual d'usuari complet per a l'ordinador industrial de la sèrie ED-IPC2600, que detalla el maquinari.view, interfícies, instal·lació, configuració i configuració del sistema operatiu. Inclou Raspberry Pi CM4 per a aplicacions de control industrial i IoT.
Preview Dispositius de sortida de la sèrie ED-500 transatlàntica: especificacions ED-501 i ED-VR531
Especificacions detallades, característiques i referències creuades per als dispositius de sortida de la sèrie Trans-Atlantic ED-500, incloent-hi el dispositiu de sortida superficial de vora ED-501 i el dispositiu de sortida de vareta vertical ED-VR531, juntament amb una llista completa d'accessoris compatibles.