Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Cadel Spirit 3 Pellet Stove 5.2 kW. Please read this manual thoroughly before installation and use, and retain it for future reference. Proper use and maintenance will ensure optimal performance and longevity of your appliance.
Imatge: Frontal view of the Cadel Spirit 3 Pellet Stove 5.2 kW in red, showcasing the burning pellets through the glass door. The stove features a modern, compact design.
Informació de seguretat
Always adhere to local building codes and regulations when installing and operating this pellet stove. Failure to comply with safety instructions may result in property damage, personal injury, or death.
- Instal·lació: Ha de ser realitzat per un tècnic qualificat.
- Combustible: Use only approved wood pellets. Do not use gasoline, kerosene, or other flammable liquids.
- Liquidacions: Maintain adequate clearance from combustible materials as specified in the installation guide.
- Ventilació: Assegureu-vos una ventilació adequada per evitar l'acumulació de monòxid de carboni.
- Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats de les superfícies calentes de l'estufa.
- Manteniment: Regular cleaning and inspection are crucial for safe operation.
Configuració i instal·lació
Installation of the Cadel Spirit 3 Pellet Stove 5.2 kW requires adherence to specific guidelines to ensure safety and optimal performance. It is strongly recommended that installation be carried out by a certified professional.
1. Desembalatge
Carefully remove the stove from its packaging. Inspect for any damage that may have occurred during transit. Report any damage to your dealer immediately.
2. Col·locació
Select a suitable location that meets all local building codes and fire safety regulations. Ensure the floor can support the stove's weight (55 kg net weight). Maintain required clearances from walls and combustible materials. The stove is designed for freestanding installation.
3. Venting System Connection
Connect the stove to an appropriate chimney or flue system. The smoke evacuation diameter is 8 cm. Ensure all connections are sealed properly to prevent smoke leakage. A direct vent type is specified.
4. Connexió elèctrica
Connect the stove to a grounded electrical outlet. The stove operates as a standalone unit and requires power for its forced ventilation system and controls.
5. Initial Fuel Loading
Open the pellet hopper and fill it with approved wood pellets. The total tank capacity is 12 kg.
Instruccions de funcionament
Follow these steps for safe and efficient operation of your pellet stove.
1. Starting the Stove
- Ensure the pellet hopper is sufficiently filled.
- Enceneu l'interruptor principal.
- Press the "ON" button on the control panel. The stove will initiate its automatic ignition sequence. This typically involves feeding pellets into the burn pot and activating the igniter.
- Monitor the ignition process. Flames should appear within a few minutes.
2. Ajust de la producció de calor
The Cadel Spirit 3 features forced ventilation for heat distribution. Use the control panel to adjust the desired heat setting. Higher settings will increase pellet consumption and heat output.
- Potència nominal: 5.2 kW
- Heatable Volume: Fins a 125 m³
- Hourly Consumption: Approximately 1.2 kg/h at nominal power.
3. Shutting Down the Stove
- Press the "OFF" button on the control panel.
- The stove will enter a cool-down cycle, continuing to run the fan to dissipate residual heat and burn off remaining pellets in the burn pot.
- Do not turn off the main power switch until the cool-down cycle is complete and the stove has fully extinguished.
Manteniment
Regular maintenance is essential for the safe and efficient operation of your Cadel Spirit 3 Pellet Stove.
Manteniment diari
- Clean the Burn Pot: Remove ash and unburnt pellets from the burn pot. Ensure air holes are clear.
- Clean the Ash Pan: Empty the ash pan.
- Netegeu el vidre: Use a specialized glass cleaner for pellet stoves to remove soot buildup.
Manteniment setmanal
- Vacuum Ash: Use a shop vacuum or ash vacuum to remove ash from the firebox and surrounding areas.
- Inspeccioneu les juntes: Check door and glass gaskets for wear and tear. Replace if necessary to maintain an airtight seal.
Manteniment anual
- Neteja de xemeneies/conductes: Have the chimney and flue pipe professionally cleaned to prevent creosote buildup.
- Neteja interior: A qualified technician should perform a thorough internal cleaning and inspection of all components, including fans, motors, and heat exchangers.
- Comprovació de components: Inspect all electrical connections and mechanical parts for proper function and wear.
Resolució de problemes
This section addresses common issues you might encounter with your Cadel Spirit 3 Pellet Stove. For problems not listed here, or if issues persist, contact a qualified service technician.
| Problema | Causa possible | Solució |
|---|---|---|
| Stove does not ignite. |
|
|
| Baixa sortida de calor. |
|
|
| Fum excessiu. |
|
|
Especificacions
Technical specifications for the Cadel Spirit 3 Pellet Stove 5.2 kW.
- Marca: CADEL
- Model: Spirit 3 Pellet 5.2 kW
- Tipus de calefacció: Ventilació forçada
- Potència nominal: 5.2 kW
- Heatable Volume: 125 m³
- Eficiència: 89.5%
- Hourly Pellet Consumption: 1.2 kg/h
- Classe energètica: A+
- Total Tank Capacity: 12 kg
- Smoke Evacuation Diameter: 8 cm
- Certificació ambiental: 4 estrelles
- Material de recobriment: Varnished Metal
- Color: Vermell
- Dimensions (Profunditat x Amplada x Alçada): 275 mm x 958 mm x 275 mm
- Pes net: 55 kg
- ASIN: B09J17VM1D
Garantia i Suport
For warranty information and technical support, please refer to the official CADEL website or contact your authorized dealer. Specific warranty terms and conditions may vary by region.
Spare parts availability information is not directly provided in the product details. Please consult the manufacturer or your dealer for spare parts inquiries.
