Turbo Racing 2.4GHz 4-Channel Receiver (RX49) User Manual

1. Introducció

This manual provides essential instructions for the proper setup, operation, and maintenance of your Turbo Racing 2.4GHz 4-Channel Receiver (Model RX49). This receiver is designed for use with RC cars and boats, featuring a built-in gyro and failsafe function for enhanced control and safety. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

2. Producte acabatview

The Turbo Racing RX49 is a compact and lightweight 4-channel receiver with integrated gyro stabilization and failsafe capabilities. It is compatible with Turbo Racing P52, P32, and P62 transmitters.

Figura 1: Davant view of the Turbo Racing RX49 receiver, showing channel ports and control buttons.

Figura 2: En angle view of the Turbo Racing RX49 receiver, highlighting its compact design.

Característiques principals:

• 4-Channel operation
• Integrated Gyro Stabilization
• Funció de seguretat
• Disseny impermeable
• Compact size: 25 x 20 x 15 mm
• Lightweight: 8g
• Compatibility: Turbo Racing P52, P32, P62 transmitters

3. Setup and Binding

Before operating your RC model, the receiver must be properly bound to your transmitter. Follow these steps carefully:

1. Connectar l'alimentació: Connect the receiver to a power source (e.g., ESC BEC) via the designated power port. Some users have noted that for certain setups, power may need to be connected to Channel 2.
2. Enter Binding Mode:
   • Locate the BEC connector terminals on the top side of the receiver.
   • Identify the "PAIR" marking.
   • Using a small metal object (e.g., a paperclip or a dedicated shorting plug, which is not included with the receiver), short-circuit the left and center terminals of the BEC connector. This will put the receiver into pairing mode.
   • The indicator light on the receiver should begin to flash rapidly.
3. Power On Transmitter: While the receiver is in pairing mode, turn on your Turbo Racing transmitter.
4. Confirma l'enllaç: The indicator light on the receiver should stop flashing and remain solid, indicating a successful binding.
5. Controls de prova: After successful binding, test all control surfaces (steering, throttle) to ensure proper communication between the transmitter and receiver.

Nota important: A short-circuit connector is required for binding and is not included with the receiver. You will need to provide your own tool for this step.

Figura 3: A dalt view of the RX49 receiver, showing the BEC connector terminals for binding (left and center pins marked PAIR).

4. Instruccions de funcionament

Once bound, the RX49 receiver is ready for operation. This receiver features an integrated gyro for improved stability and control, especially useful for RC drift cars or boats.

4.1 Gyro Function and Adjustment

The RX49 receiver has a built-in gyro function. If your transmitter does not have a dedicated gyro adjustment function, you can adjust the gyro sensitivity directly on the receiver:

1. Activate Gyro: Long-press the "Gain" button on the receiver. The indicator light will flash rapidly, confirming the gyro is ON.
2. Increase Gyro Sensitivity: While the gyro is ON, press the "Gain" button briefly to increase the gyro sensitivity.
3. Decrease Gyro Sensitivity: While the gyro is ON, press the "Rev/Nor" button briefly to decrease the gyro sensitivity.

Nota: The "Gain" and "Rev/Nor" buttons are small and may require a thin object (like a toothpick or small screwdriver) to press.

4.2 Failsafe Function

The failsafe function is designed to protect your model in case of signal loss. When the signal is lost, the receiver will automatically set the throttle to a pre-defined position (usually neutral or brake) and steering to a neutral position to prevent the model from running out of control. Ensure your failsafe settings are configured correctly according to your transmitter's manual.

5. Manteniment

The Turbo Racing RX49 receiver is designed for durability and features a waterproof specification. Minimal maintenance is required:

• Neteja: Periodically clean the receiver's exterior with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Connexions: Ensure all wire connections are secure and free from corrosion.
• Emmagatzematge: Guardeu el receptor en un lloc sec i fresc, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
• Exposició a l'aigua: While waterproof, avoid prolonged submersion or exposure to highly corrosive liquids. Always ensure the receiver is dry before connecting power after water exposure.

6. Solució De Problemes

If you encounter issues with your RX49 receiver, refer to the following troubleshooting guide:

7. Especificacions

8. Garantia i Suport

For warranty information and technical support, please refer to the official Turbo Racing weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.