Introducció
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RICOO S7744 TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The RICOO S7744 TV Wall Mount, showcasing its articulating arm design.
Informació de seguretat
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- Use appropriate tools and follow all steps precisely. If unsure, consult a qualified installer.
- No supereu la capacitat màxima de pes de 45 kg (99 lliures).
- Verify VESA compatibility (max 400x400 mm) with your TV before installation.
- Mantingueu els nens i les mascotes allunyats durant la instal·lació.
Contingut del paquet
Please check that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
El paquet normalment inclou:
- Wall plate assembly with articulating arm
- TV bracket arms
- Mounting hardware kit (various screws, washers, spacers, and concrete anchors)
- Manual d'instruccions
Configuració i instal·lació
Follow these steps carefully to install your TV wall mount. It is recommended to have two people for installation.
- Pas 1: determineu la ubicació de muntatge
Choose a suitable location on your wall. Ensure there are no hidden electrical wires or plumbing. The wall must be capable of supporting the weight of the mount and your TV. Use a stud finder if mounting to wood studs.
- Pas 2: connecteu els suports del televisor al televisor
Carefully place your TV face down on a soft, clean surface. Attach the TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
Note: The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
- Pas 3: Muntar la placa de paret a la paret
Hold the wall plate assembly against the wall at your desired height. Use a level to ensure it is straight. Mark the drilling locations. Drill pilot holes. For concrete walls, insert the provided wall anchors. Secure the wall plate to the wall using the appropriate screws. Ensure it is level and firmly attached.
- Pas 4: Pengeu el televisor a la placa de paret
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.
Operating the TV Wall Mount
The RICOO S7744 mount offers various adjustments for optimal viewing.
- Girar: The mount allows for a swivel range of +/-60 degrees. Gently push or pull the TV to adjust the viewangle horitzontal.
- Inclinació: Ajusteu la vertical viewing angle with a tilt range of +18 degrees (up) to -2 degrees (down). Loosen the tilt adjustment screws, set the desired angle, and re-tighten.
- Nivell: The front plate can be rotated +/-3 degrees for fine-tuning the TV's level after installation. Loosen the leveling screws, adjust, and re-tighten.
- Extensió: The arm length can be extended from 86 mm to 388 mm from the wall. Gently pull the TV away from the wall or push it closer.
Image: Demonstrates the swivel, tilt, and extension capabilities of the mount, along with integrated cable management features for organizing cables.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Comprovacions periòdiques: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Moviment: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the moving joints.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat | Wall plate not level, or front plate adjustment needed. | Adjust the +/-3 degree leveling feature on the front plate. If the wall plate is significantly off, re-install it ensuring it is level. |
| Mount feels loose or wobbly | Mounting screws are not tight enough, or wall anchors are insufficient. | Check and re-tighten all wall and TV mounting screws. Ensure appropriate anchors were used for your wall type and that they are securely installed. |
| Difficulty adjusting swivel/tilt | Adjustment screws are too tight, or joints require lubrication. | Loosen adjustment screws slightly. Apply silicone-based lubricant to moving joints if necessary. |
Especificacions
- Model: S7744
- Compatibilitat de la mida de la pantalla: 32 - 55 polzades (81 cm - 140 cm)
- Capacitat de pes màxim: 45 kg (99 lliures)
- Compatibilitat VESA: 200x200, 300x200, 300x300, 400x200, 400x400 mm
- Interval de rotació: +/-60 graus
- Rang inclinat: +18 degrees / -2 degrees
- Ajust de nivellació: +/-3 graus
- Wall Distance (Arm Length): 86 mm - 388 mm
- Material: Steel (Note: Product specifications listed 'wood', but steel is the standard material for TV mounts of this type.)
- Color: Negre
- Dimensions del producte: 15.28 x 17.13 x 16.54 polzades
- Pes de l'article: 9.48 lliures
Image: Detailed technical drawing showing the dimensions and adjustable ranges of the RICOO S7744 TV Wall Mount in millimeters.
Garantia i Suport
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RICOO weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Fabricant: ENZ Engineering GmbH
