1. Introducció
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Duravit D-Neo 0021690000 Round Closed-Front Toilet Seat with Soft Close. Please read this manual carefully before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your product.
2. Informació de seguretat
- Always wear appropriate personal protective equipment (PPE) during installation, such as gloves and eye protection.
- Ensure all fasteners are securely tightened to prevent the seat from shifting during use. Do not overtighten, as this may damage the product.
- Avoid using abrasive cleaners, solvents, or harsh chemicals on the toilet seat, as these can damage the plastic surface and the soft-close mechanism.
- Do not stand on the toilet seat or lid. This product is designed for seating only.
- Keep small children away from the toilet seat during installation to prevent injury from tools or small parts.
3. Contingut del paquet
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Duravit customer support.
- Duravit D-Neo Round Closed-Front Toilet Seat with Lid
- Mounting Hardware (hinges, bolts, washers, nuts)
Figure 3.1: Duravit D-Neo Toilet Seat with lid open, showing the seat and mounting points.
4. Configuració i instal·lació
Follow these steps to properly install your Duravit D-Neo toilet seat.
- Preparar la tassa del vàter: Ensure the toilet bowl's mounting holes are clean and free of debris. Remove any old toilet seat and hardware.
- Insert Mounting Bolts: Place the rubber washers over the mounting holes on the toilet bowl. Insert the threaded bolts of the hinge assembly through the washers and holes.
- Attach Hinges to Seat: Align the hinge posts with the corresponding holes on the underside of the toilet seat. Secure the hinges to the seat using the provided screws, ensuring they are snug but not overtightened.
- Col·locació del seient: Carefully lower the toilet seat onto the toilet bowl, guiding the hinge bolts through the mounting holes.
- Assegura el seient: From underneath the toilet bowl, place the plastic washers and then the nuts onto the threaded bolts. Hand-tighten the nuts initially to allow for adjustment.
- Adjust and Finalize: Adjust the seat position to ensure it is centered and aligned with the toilet bowl. Once aligned, fully tighten the nuts with a wrench. Do not overtighten.
Figura 4.1: Primer pla view of the Duravit D-Neo toilet seat hinges installed on a toilet bowl.
Figure 4.2: Top-down diagram illustrating the dimensions of the Duravit D-Neo toilet seat.
5. Instruccions de funcionament
The Duravit D-Neo toilet seat features a soft-close mechanism for both the seat and the lid, designed to prevent slamming and reduce noise.
- Funció de tancament suau: To engage the soft-close feature, simply push the seat or lid down gently. The mechanism will take over, allowing it to close slowly and quietly on its own.
- Do not force the seat or lid closed, as this can damage the soft-close mechanism over time.
Figure 5.1: The Duravit D-Neo toilet seat in its closed position, demonstrating the soft-close feature.
6. Manteniment i neteja
Regular cleaning and proper maintenance will help preserve the appearance and functionality of your toilet seat.
- Neteja diària: Utilitzeu un drap suau dampened with mild soap and water to wipe down the seat and lid.
- Eviteu productes químics durs: Do not use abrasive cleaners, scouring pads, strong detergents, disinfectants containing chlorine, or aerosol cleaners. These can scratch the surface, dull the finish, or damage the soft-close mechanism.
- Assecat: Always dry the seat thoroughly with a soft, clean cloth after cleaning to prevent water spots.
- Cura de les frontisses: Periodically check the hinge connections for tightness. If the seat feels loose, gently tighten the mounting nuts.
7. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| Seat is loose or shifts | Les femelles de muntatge no estan prou ajustades. | Estrenyeu les femelles de muntatge sota la tassa del vàter. No les estrenyeu massa. |
| Soft-close mechanism not working | El mecanisme està obstruït o danyat. | Check for any obstructions around the hinges. If damaged, contact customer support for replacement parts or warranty service. |
| Seat does not align with bowl | Seat was not properly aligned during installation. | Loosen the mounting nuts, adjust the seat to the correct position, then retighten the nuts. |
8. Especificacions
Key specifications for the Duravit D-Neo 0021690000 Toilet Seat:
| Característica | Detall |
|---|---|
| Número de model | 0021690000 |
| Tipus | Round, Closed-Front |
| Material | Plàstic |
| Color | Blanc |
| Característiques especials | Tapa de tancament suau |
| Dimensions del producte | 18.2 cm de llargada x 14.4 cm d'amplada (aproximadament) |
| Pes de l'article | 6 lliures |
Figure 8.1: Bottom-up diagram illustrating additional dimensions of the Duravit D-Neo toilet seat.
9. Informació de la garantia
The Duravit D-Neo 0021690000 Round Closed-Front Toilet Seat is covered under Duravit's Garantia limitada d'1 any. This warranty covers defects in material and workmanship under normal residential and commercial use.
For full warranty terms and conditions, please visit the official Duravit weblloc o contacteu amb el servei d'atenció al client.
10. Atenció al client
If you have any questions, require assistance with installation, or need to report a defect, please contact Duravit customer support through their official weblloc web o la informació de contacte proporcionada amb la compra.
For more information about Duravit products, visit: www.duravit.us
