1. Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your Duravit D-Neo Vanity Sink, Model 236780. Please read these instructions carefully before beginning installation or use to ensure safety and optimal performance of the product. Retain this manual for future reference.
Figure 1: Duravit D-Neo Vanity Sink, front view. This image displays the white ceramic sink with a single faucet hole and an integrated overflow.
2. Informació de seguretat
Always observe the following safety precautions during installation and use:
- Assegureu-vos que totes les línies de subministrament d'aigua estiguin tancades abans de començar qualsevol treball de fontaneria.
- Utilitzeu equips de protecció individual (EPI) adequats, com ara ulleres i guants de seguretat.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
- Do not overtighten plumbing connections, as this can damage the ceramic or fittings.
- The sink is heavy; use proper lifting techniques or seek assistance to prevent injury.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Duravit D-Neo Vanity Sink (Model 236780)
- Mounting hardware (if included with the specific model variant)
Note: Faucet, drain assembly, and P-trap are typically sold separately.
4. Eines necessàries
Generalment es necessiten les eines següents per a la instal·lació:
- Clau ajustable
- Joc de tornavisos (Phillips i de punta plana)
- Massilla de lampista o segellador de silicona
- Nivell
- Cinta mètrica
- Drill (if mounting to wall studs or vanity)
5. Configuració i instal·lació
5.1 Comprovacions prèvies a la instal·lació
- Inspect the sink for any damage before installation. Do not install a damaged product.
- Ensure the vanity cabinet or wall mounting surface is structurally sound and level.
- Confirm that water supply lines and drain rough-ins are correctly positioned according to local plumbing codes.
5.2 Dimensions and Planning
Refer to the dimension diagrams for precise measurements to ensure proper fit and rough-in planning.
Figura 2: lateral view of the Duravit D-Neo Vanity Sink with imperial dimensions, showing height, depth, and faucet hole placement.
Figura 3: superior view of the Duravit D-Neo Vanity Sink with imperial dimensions, indicating width, depth, and basin mesures.
5.3 Mounting the Sink
- For Vanity Installation: Apply a bead of silicone sealant along the top edge of the vanity cabinet where the sink will rest. Carefully lower the sink onto the vanity, aligning it properly.
- For Wall-Mounted Installation: Mark the mounting points on the wall using the sink's dimensions and a level. Drill pilot holes and secure the mounting brackets (if applicable) or bolts into wall studs or appropriate anchors. Carefully lift the sink and secure it to the wall using the provided hardware.
5.4 Faucet and Drain Installation
- Install the faucet according to the manufacturer's instructions, securing it through the pre-drilled hole in the sink.
- Install the drain assembly into the sink's drain opening, using plumber's putty or silicone sealant under the flange to create a watertight seal. Connect the P-trap to the drain assembly and the wall drain pipe.
- Connect the hot and cold water supply lines to the faucet and the corresponding shut-off valves.
5.5 Proves de fuites
- Once all connections are made, slowly turn on the water supply.
- Check all connections for leaks. Tighten any leaking connections gently.
- Fill the sink with water and then drain it, observing the drain assembly and P-trap for any leaks.
6. Instruccions de funcionament
The Duravit D-Neo Vanity Sink operates like any standard bathroom sink. Turn the faucet handles to control water flow and temperature. The integrated overflow is designed to prevent minor overfilling, but it is not a substitute for supervision.
7. Manteniment
7.1 Neteja
To maintain the appearance and longevity of your ceramic sink:
- Clean regularly with a soft cloth and mild, non-abrasive cleaner.
- Wipe with a dry cloth after cleaning to prevent water spots and mineral buildup.
- Avoid using harsh chemicals, abrasive cleaners, scouring pads, or steel wool, as these can damage the ceramic surface.
- For stubborn stains, consult the Duravit website for specific ceramic care recommendations.
7.2 Drain Maintenance
Periodically remove and clean the drain stopper to prevent hair and debris buildup that can lead to clogs.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Leaking at connections | Loose fittings, improper sealant, damaged washer | Tighten connections, reapply plumber's putty/sealant, replace washer |
| Drenatge lent | Clogged drain or P-trap | Remove and clean drain stopper, clear P-trap |
| Water spots/stains | Hard water, mineral buildup | Wipe dry after each use, use a mild descaling solution if necessary |
9. Especificacions
| Característica | Detall |
|---|---|
| Marca | Duravit |
| Número de model | 236780 |
| Color | Blanc |
| Material | Ceràmica |
| Dimensions del producte (P x A x A) | 6.5 "P x 31.5" W x 6.5" H |
| Tipus d'instal·lació | Undermount (also suitable for vanity top installation) |
| Forma | Rectangular |
| Pes de l'article | 50.8 lliures |
| Tipus de drenatge | Desplegable (compatible) |
10. Informació de la garantia
Duravit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your D-Neo Vanity Sink, please refer to the warranty documentation included with your purchase or visit the official Duravit weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
11. Suport
For technical assistance, replacement parts, or further inquiries, please contact Duravit customer support through their official weblloc web o la informació de contacte proporcionada amb la documentació del producte.
Official Duravit Weblloc: www.duravit.us
