Akko ACR61 61-Key 60% RGB Hot-swappable Wired Mechanical Gaming Keyboard User Manual

1. Introducció

This manual provides instructions for the Akko ACR61 61-Key 60% RGB Hot-swappable Wired Mechanical Gaming Keyboard. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

The Akko ACR61 keyboard features a 60% layout, RGB backlighting, and hot-swappable switches, allowing for customization and enhanced typing experiences. It utilizes PBT double-shot keycaps for durability and N-key rollover for precise input.

Image 1.1: Akko ACR61 keyboard showcasing the Prunus Lannesiana design and Jelly Pink switches.

2. Configuració

2.1 Contingut del paquet

• Akko ACR61 Mechanical Keyboard
• Cable USB-C a USB-A
• Extractor de tecles
• Tirador de commutació
• Additional Keycaps (if included)

2.2 Connexió del teclat

1. Locate the USB-C port on the back or side of the Akko ACR61 keyboard.
2. Connecteu l'extrem USB-C del cable proporcionat al teclat.
3. Connect the USB-A end of the cable to an available USB port on your computer or device.
4. The keyboard will be automatically recognized by most operating systems. No additional drivers are typically required for basic functionality.

3. Instruccions de funcionament

3.1 Funcions bàsiques de les tecles

The Akko ACR61 is a 60% keyboard, meaning some functions are accessed via the 'Fn' key combined with other keys. Refer to the keycap legends for specific Fn combinations.

• Fn + [Tecla]: Accesses secondary functions printed on the front or side of keycaps (e.g., arrow keys, F-row keys, multimedia controls).
• Canvi de clau N (NKRO): The keyboard supports simultaneous key presses without conflicts, which is beneficial for fast typing and gaming.

Imatge 3.1: Primer pla view of the Akko ACR61 keycaps, illustrating primary and secondary functions.

3.2 Control de retroil·luminació RGB

The keyboard features built-in RGB backlighting with customizable light animation effects. Specific key combinations, often involving the 'Fn' key, are used to cycle through lighting modes, adjust brightness, and change colors.

• Fn + [Tecla]: Typically used to change RGB effects, speed, or direction. Consult the keyboard's specific keycap legends or software for exact combinations.
• LED sota llum: The keyboard also features underglow LED lighting, which can be controlled independently or in conjunction with the main RGB backlighting.

3.3 Programmability

The Akko ACR61 keyboard is programmable, allowing users to remap keys and create macro sequences. This functionality is typically managed through dedicated software provided by Akko. Keys used for controlling Macro mode (Esc/Win/Fn) cannot be remapped.

• Reasignació de claus: Assign different functions to individual keys.
• Enregistrament macro: Record a sequence of keystrokes and assign it to a single key for quick execution.

4. Manteniment

4.1 Neteja del teclat

Una neteja regular ajuda a mantenir l'aspecte i la funcionalitat del teclat.

1. Desconnecta el teclat de l'ordinador.
2. Feu servir un raspall suau o aire comprimit per eliminar la pols i les restes que hi ha entre les tecles.
3. For keycap cleaning, gently remove keycaps using a keycap puller. Wash them with mild soap and water, then ensure they are completely dry before reattaching.
4. Netegeu la superfície del teclat amb un drap lleuger.amp, drap sense borrissol. Eviteu la humitat excessiva.

4.2 Commutadors intercanviables en calent

The Akko ACR61 features premium TTC gaming 5-pin hot-swappable sockets, allowing you to change switches without soldering.

Image 4.1: A Jelly Pink mechanical switch, illustrating the hot-swappable design.

1. Eliminació d'un interruptor: Use the provided switch puller to carefully grip the top and bottom clips of the switch. Gently pull the switch straight up and out of the socket. Avoid bending the pins.
2. Installing a Switch: Align the pins of the new switch with the holes in the PCB socket. Ensure the pins are straight. Gently push the switch straight down until it clicks into place. Do not force the switch; if resistance is met, check pin alignment.

5. Solució De Problemes

5.1 El teclat no respon

• Assegureu-vos que el cable USB estigui connectat correctament tant al teclat com a l'ordinador.
• Prova de connectar el teclat a un port USB diferent de l'ordinador.
• Prova el teclat en un altre ordinador per descartar problemes específics del sistema.
• Si feu servir un concentrador USB, proveu de connectar-lo directament a l'ordinador.

5.2 La il·luminació RGB no funciona o és incorrecta

• Assegureu-vos que el teclat estigui connectat i alimentat correctament.
• Use the designated Fn key combinations to cycle through lighting modes or adjust brightness.
• If using Akko software, ensure it is running and configured correctly.

5.3 Tecles específiques que no funcionen

• For hot-swappable switches, carefully remove the keycap and then the switch for the affected key. Reinstall the switch, ensuring the pins are straight and fully seated.
• Test with a known working switch in the problematic socket to determine if the issue is with the switch or the socket.
• Ensure no debris is obstructing the switch mechanism.

6. Especificacions

7. Garantia i Suport

For warranty information and technical support, please refer to the official Akko weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

Official Akko Store: Akko Store on Amazon