AEG Automotive Wallbox FF 22 KW Electric Vehicle Charging Station

1. Introducció

Thank you for choosing the AEG Automotive Wallbox FF 22 KW. This charging station is designed to provide efficient and safe charging for your electric or hybrid vehicle. This manual contains important information regarding the installation, operation, maintenance, and troubleshooting of your Wallbox. Please read it carefully before installation and use, and keep it for future reference.

2. Informació de seguretat

Instruccions importants de seguretat:

• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis i regulacions elèctriques locals i nacionals.
• Do not attempt to open, disassemble, repair, or modify the Wallbox. This can cause serious injury, electric shock, or fire, and will void the warranty.
• Ensure the Wallbox is securely mounted on a solid surface capable of supporting its weight.
• Mantingueu els nens i les mascotes allunyats de l'estació de càrrega durant el funcionament.
• Do not use the Wallbox if it is damaged, wet, or shows any signs of malfunction.
• Always ensure the charging cable and connector are free from damage before use.
• The integrated circuit breaker (Type A) provides reliable protection against overvoltage and electric shock. Do not bypass or tampamb aquesta característica de seguretat.

3. Producte acabatview

3.1 Característiques clau

• Càrrega eficient: Provides fast and efficient charging power up to 22 kW via 3-phase 400 V AC.
• Compatibilitat universal: Equipped with a Type 2 charging connector, compliant with IEC 62196 standard, suitable for most electric and hybrid vehicles.
• Seguretat millorada: Features an integrated circuit breaker (Type A) for reliable protection against overvoltage i descàrrega elèctrica.
• Interfície fàcil d'utilitzar: A five-color LED display with five lighting modes indicates operational status and error messages.
• Longitud del cable convenient: The permanently attached charging cable is 5 meters long, offering flexibility during charging.
• Smart Grid Ready: Includes an RS485 bus interface for connection to photovoltaic systems and intelligent control electronics, supporting energy management.
• Operació senzilla: Designed for quick and easy use without requiring user authentication.
• Disseny robust: IP45 certified for protection against jet water and splashes.

3.2 Components

The AEG Automotive Wallbox FF 22 KW includes the following main components:

• Wallbox charging unit
• Integrated 5-meter Type 2 charging cable with connector
• Suport de muntatge a la paret
• Maquinari d'instal·lació (cargols, ancoratges)
• Manual d'usuari i documentació

Figure 1: Package contents of the AEG Wallbox FF 22 KW.

4. Configuració i instal·lació

És obligatòria una instal·lació professional per part d'un electricista qualificat.

4.1 Llista de comprovació prèvia a la instal·lació

• Verify that the electrical supply meets the Wallbox requirements (3-phase 400V AC).
• Ensure the installation location is suitable, protected from direct sunlight and heavy rain (though the unit is IP45 rated).
• Confirm the mounting surface is structurally sound.
• Have all necessary tools and safety equipment ready.

4.2 Mounting the Wallbox

1. Choose a suitable mounting height, ensuring the charging cable can comfortably reach the vehicle's charging port.
2. Feu servir el suport de muntatge proporcionat com a plantilla per marcar els punts de perforació a la paret.
3. Perfora forats i insereix els ancoratges de paret adequats.
4. Securely attach the mounting bracket to the wall using the provided screws.
5. Mount the Wallbox unit onto the bracket.

Figure 2: Properly mounted AEG Wallbox FF 22 KW.

4.3 Connexió elèctrica

This step must be performed by a qualified electrician.

1. Desconnecteu l'alimentació principal al disjuntor.
2. Connect the Wallbox to the dedicated 3-phase 400V AC circuit according to the wiring diagram provided in the full installation manual.
3. Assegureu-vos que totes les connexions estiguin estretes i segures.
4. Verificar la connexió a terra correcta.
5. Close the Wallbox housing securely.
6. Restore power and check the LED indicator for initial status.

Figure 3: Internal components and wiring (for qualified electricians only).

5. Instruccions de funcionament

5.1 Comprensió de l'indicador LED

The Wallbox features a five-color LED display that indicates its operational status:

• Verd (sòlid): A punt per carregar.
• Blau (pulsant): Càrrega en curs.
• Vermell (sòlid): Error or fault. Refer to troubleshooting.
• Groc (sòlid): Waiting for vehicle connection.
• White (Solid): Mode d'espera.

Figure 4: LED status indicator.

5.2 Initiating a Charging Session

1. Ensure the Wallbox LED is green (ready).
2. Remove the protective cap from the Type 2 charging connector.
3. Insert the Type 2 connector firmly into your vehicle's charging port.
4. The Wallbox LED will change to blue (pulsing) to indicate that charging has started. Your vehicle's dashboard or charging indicator will also confirm the charging status.

Figure 5: Connecting the Type 2 charging connector.

Figure 6: Vehicle charging in progress.

5.3 Finalització d'una sessió de càrrega

1. Most vehicles allow you to stop charging via their onboard system or app. Alternatively, simply disconnect the charging connector from your vehicle.
2. The Wallbox LED will return to green (ready).
3. Replace the protective cap on the Type 2 connector and coil the cable neatly on the Wallbox's integrated holder.

Figure 7: Cable management after charging.

6. Manteniment

The AEG Automotive Wallbox FF 22 KW requires minimal maintenance.

• Neteja: Periodically wipe the exterior of the Wallbox with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off before cleaning.
• Inspecció de cables i connectors: Regularly inspect the charging cable and connector for any signs of wear, cuts, cracks, or damage. If any damage is found, discontinue use immediately and contact a qualified technician.
• Protecció del medi ambient: Although the Wallbox is IP45 rated, protecting it from extreme weather conditions (e.g., heavy snow, prolonged direct sunlight) can extend its lifespan.

Figure 8: IP45 protection against water splashes.

7. Solució De Problemes

If you encounter issues with your Wallbox, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact AEG Automotive customer support or a qualified electrician.

8. Especificacions

9. Informació de la garantia

For detailed warranty information, please refer to the warranty card included with your product or visit the official AEG Automotive weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

10. Atenció al client

If you have any questions, require technical assistance, or need to report a fault, please contact AEG Automotive customer support. Contact details can typically be found on the product packaging, the official website, or in the included documentation.

Recursos en línia:

• Visita el Botiga de la marca AEG per a més informació i productes.