1. Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your SimPure Whole House Water Filter Housing. Please read these instructions carefully before installation and retain them for future reference. This system is designed to filter water for various household and commercial applications, improving water quality and protecting plumbing and appliances.
2. Components del producte
The SimPure Whole House Water Filter Housing package includes the following items:
- DB1025 Whole House Water Filter Housing (1 unit)
- Clau anglesa (1 unitat)
- Steel Bracket (1 unit)
- Cargols (4 unitats)
Note: Filter cartridges and push fittings are sold separately and are not included with this housing unit.
3. Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | Carcassa del filtre d'aigua per a tota la casa |
| Número de model de l'article | DB1025 |
| Tipus d'instal·lació | Whole-House, Inline |
| Mida d'entrada/sortida | 3/4 polzada NPT |
| Compatible Filter Cartridge Size | Universal 10 inch x 2.5 inch |
| Caudal màxim | 5 litres per minut |
| Classificació de temperatura superior | 120 graus Fahrenheit (49 graus Celsius) |
| Pes de l'article | 2.5 lliures (aprox. 1.13 kg) |
| Material | Polipropilè de grau alimentari |
| Característiques | Pressure Relief Button, Heavy-Duty Steel Bracket, Reinforced Top Mounting Hole |
4. Informació de seguretat
- Always shut off the main water supply before installing or servicing the filter housing.
- Release pressure from the system using the red pressure relief button before opening the housing.
- Ensure all connections are properly sealed to prevent leaks. Use appropriate thread sealant (e.g., Teflon tape) on NPT threads.
- Do not overtighten the housing during installation or filter replacement, as this can damage the unit.
- The maximum operating temperature is 120°F (49°C). Do not use with water exceeding this temperature.
- This housing is designed for cold water applications only.
- Mantenir el producte fora de l'abast dels nens.
5. Configuració i instal·lació
Follow these steps for proper installation of your SimPure Whole House Water Filter Housing:
- Trieu la ubicació d'instal·lació: Select a suitable location for the filter housing. Ensure there is at least 2 inches of clearance below the housing for future filter changes. The location should be protected from freezing temperatures and direct sunlight.
- Tancament del subministrament d'aigua: Turn off the main water supply to your home or the specific area where the filter will be installed. Open a nearby faucet to relieve pressure and drain the water lines.
- Muntar el suport: Use the provided steel bracket and screws to securely mount the filter housing head to a sturdy surface. Ensure the bracket is level.
- Aplicar segellador de rosques: Wrap Teflon tape (not included) around the 3/4 inch NPT inlet and outlet threads of the filter housing to create a watertight seal.
- Connecteu la fontaneria: Connect your water pipes to the inlet and outlet ports of the filter housing. The inlet is typically marked with an "IN" arrow, and the outlet with an "OUT" arrow. Ensure the flow direction is correct. Push fittings or other appropriate connectors (not included) may be required depending on your plumbing system.
- Insert Filter Cartridge: Unscrew the housing sump from the head using the provided wrench. Insert the appropriate 10-inch x 2.5-inch filter cartridge (not included) into the sump. Ensure the O-ring is properly seated in its groove on the canister or cap to prevent leaks.
- Secure the Sump: Screw the sump back onto the housing head. Hand-tighten until snug, then use the wrench for an additional 1/4 to 1/2 turn to ensure a secure, leak-free seal. Do not overtighten.
- Restore Water Supply and Flush: Slowly turn on the main water supply. Check for any leaks. Once water flow is established, press the red pressure relief button on top of the housing to release trapped air. Flush the system by running water through a nearby faucet for a few minutes to remove any air or carbon fines from new cartridges.
6. Instruccions de funcionament
Once installed, the SimPure Whole House Water Filter Housing operates continuously as water flows through your main water line. The filter cartridge inside removes impurities based on its specific filtration capabilities (e.g., sediment, chlorine, taste, odor).
Com funciona el sistema:
Tap water enters the filter housing through the inlet. It then flows through the filter cartridge, where contaminants are trapped or absorbed. The filtered water exits the housing through the outlet, providing clean water to your entire home or specific application points.
Aplicacions:
This filter housing is suitable for various applications, including:
- Whole-house water filtration
- RV water filtration systems
- Pre-filtration for multi-stage water purifiers
- Protection for washing machines, dishwashers, and shower heads
7. Manteniment
Regular maintenance, primarily filter cartridge replacement, is crucial for optimal performance and longevity of your water filter system.
Substitució del cartutx de filtre:
The frequency of filter replacement depends on water quality and usage. Typically, sediment filters are replaced every 3-6 months. A noticeable drop in water pressure or visible discoloration of the filter cartridge indicates it's time for a change.
- Tancament del subministrament d'aigua: Turn off the main water supply to the filter housing.
- Alleujar la pressió: Press the red pressure relief button on top of the housing to release any trapped pressure.
- Unscrew Sump: Place a bucket underneath the housing to catch any residual water. Use the provided wrench to unscrew the filter sump from the housing head.
- Treure el cartutx antic: Carefully remove the old filter cartridge and dispose of it according to local regulations.
- Habitatge net: Rinse the inside of the filter sump with clean water. Inspect the O-ring for any signs of wear, cracks, or damage. Replace the O-ring if necessary (search for B0D2D9MY1M for compatible O-rings). Lubricate the O-ring with food-grade silicone grease to ensure a good seal.
- Inseriu un cartutx nou: Insert a new, compatible 10-inch x 2.5-inch filter cartridge into the sump. Ensure it is centered.
- Remuntar la carcassa: Screw the sump back onto the housing head. Hand-tighten until snug, then use the wrench for an additional 1/4 to 1/2 turn. Do not overtighten.
- Restore Water Supply and Flush: Slowly turn on the main water supply. Check for leaks. Press the red pressure relief button to release air. Flush the system by running water for several minutes.
8. Solució De Problemes
This section addresses common issues you might encounter with your filter housing.
| Problema | Causa possible | Solució |
|---|---|---|
| Fuga d'aigua |
|
|
| Baixa pressió d'aigua |
|
|
| Water Not Filtering Effectively |
|
|
9. Garantia i Suport
SimPure provides reliable support for its products. For questions regarding installation, quality, or accessories, please contact SimPure customer service. If you experience any issues, particularly water leakage, professional solutions are available. One purchase includes lifetime service.
For further assistance, please refer to the contact information provided with your product or visit the official SimPure weblloc.
