Pro-Ject Debut III Phono SB BT Turntable User Manual

Introducció

Thank you for choosing the Pro-Ject Debut III Phono SB BT Turntable. This manual provides essential information for setting up, operating, and maintaining your new turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Instruccions de seguretat

• Always disconnect the turntable from the power supply before cleaning or performing any maintenance.
• No exposeu el plat giratori a la pluja o la humitat.
• Avoid placing the turntable in direct sunlight or near heat sources.
• Assegureu-vos una ventilació adequada al voltant de la unitat.
• Do not place heavy objects on the turntable.
• Feu servir només la font d'alimentació que s'inclou amb la unitat.
• Mantenir fora de l'abast dels nens.

Què hi ha a la caixa

Carefully unpack all items from the packaging. Please ensure all components listed below are present:

• Pro-Ject Debut III Phono SB BT Turntable Unit
• Funda antipols
• Connection Cable (RCA)
• Manual d'instruccions
• Font d'alimentació

Configuració

Segueix aquests passos per configurar el teu tocadiscos:

1. Col·locació: Place the turntable on a stable, level surface away from vibrations and direct sunlight.
2. Instal·lació de la safata: Carefully place the main platter onto the spindle. Ensure it sits securely.
3. Instal·lació del cinturó: Locate the drive belt and carefully stretch it around the motor pulley and the sub-platter.
4. Configuració del braç:
   

   Imatge: Detallada view of the tonearm, showing the counterweight and anti-skate wire.

   The Ortofon OM5e cartridge is typically pre-mounted. Adjust the counterweight by rotating it until the tonearm floats horizontally. Then, set the tracking force according to the cartridge manufacturer's recommendation (typically 1.75g for OM5e). Attach the anti-skate weight to the anti-skate wire and loop it over the appropriate groove on the anti-skate stub.
5. Connecting to Audio System:
   

   Imatge: Side profile of the turntable, highlighting its sturdy plinth and isolation feet.

   Connect the RCA output cables from the turntable to an available input on your amplifier or powered speakers. Since this model has a built-in phono preamp, you can connect it to a standard line-level input (e.g., AUX, CD, LINE). If your amplifier has a dedicated phono input, you may choose to bypass the internal preamp if desired (refer to the turntable's specific instructions for preamp bypass).
6. Connexió Bluetooth: To connect wirelessly, ensure your Bluetooth speaker or receiver is in pairing mode. Press and hold the Bluetooth pairing button on the turntable (if available, refer to specific model instructions for location) until the indicator light flashes. Select 'Pro-Ject Turntable' or similar from your device's Bluetooth list.
7. Connexió d'alimentació: Connect the power supply to the turntable's power input and then plug it into a wall outlet.

En funcionament

Operating your turntable is straightforward:

1. Encès/apagat:
   

   Image: The power switch, typically located on the underside or side of the plinth.

   Use the power switch to turn the turntable on or off.
2. Selecció de velocitat: The turntable supports 33, 45, and 78 RPM speeds. Use the electronic speed switch to select the appropriate speed for your record. For 78 RPM records, a special stylus (not included) is required.
3. Reproducció d'un disc:
   

   Imatge: Des de dalt view of the turntable, showing the platter, record mat, and tonearm.

   Place a record on the platter. Carefully lift the tonearm using the cueing lever. Position the stylus over the desired groove on the record. Gently lower the cueing lever to allow the stylus to descend onto the record.
4. Aturant la reproducció: At the end of a record, the tonearm will not automatically lift. Use the cueing lever to raise the tonearm and return it to its rest.

Manteniment

Regular maintenance ensures the longevity and performance of your turntable:

• Neteja del plat giratori: Use a soft, dry, lint-free cloth to clean the plinth and dust cover. Avoid abrasive cleaners or solvents.
• Cura del stylus:
  

  Imatge: Detallada view of the Ortofon OM5e cartridge and stylus, positioned over a record.

  Gently clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Do not touch the stylus with your fingers. Replace the stylus periodically (e.g., every 500-1000 hours of playback) or if you notice a degradation in sound quality.
• Neteja de discos: Keep your records clean to prevent dust buildup on the stylus and improve sound quality.

Resolució de problemes

Si teniu problemes amb el tocadiscos, consulteu els següents problemes i solucions habituals:

If the problem persists, please contact Pro-Ject customer support.

Especificacions

Key specifications for the Pro-Ject Debut III Phono SB BT Turntable:

• Dimensions del producte: 16.34 x 12.6 x 4.53 polzades
• Pes de l'article: 13.2 lliures (6 quilograms)
• Braç: 8.6 inch one-piece low-resonance aluminium tonearm
• Cartutx: Ortofon OM5e (pre-installed)
• Connectivitat: Auxiliary (RCA), Bluetooth
• Velocitat de rotació màxima: 78 RPM (admet 33, 45, 78 RPM)
• Característiques especials: Adjustable Speed, Built-in Phono Preamp
• Material del xassís: High-quality MDF chassis in high-gloss black
• Consum d'energia (mode encès): 4 watts

Garantia i Suport

This Pro-Ject turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, service, or warranty claims, please contact Pro-Ject Audio Systems customer service through their official weblloc web o la informació de contacte proporcionada amb la documentació de compra.