1. Introducció
This manual provides comprehensive instructions for the WSDCAM USB Rechargeable Bike Alarm. Designed to enhance the security of your bicycle, electric bike, motorcycle, scooter, or other valuable property, this alarm system features a loud siren, adjustable sensitivity, and convenient remote control. Please read this manual thoroughly before use to ensure proper installation and operation.
Image: The WSDCAM bike alarm unit, its remote control, and the included USB-C charging cable.
2. Característiques del producte
- USB recarregable: Built-in 4.2V 700mAh lithium battery, rechargeable via DC5V adapter and USB-C cable. Approximately 3 hours for a full charge, providing 1-3 months of operation depending on usage frequency.
- High Volume Alarm: Up to 110dB loud alarm to deter potential thieves. Features 3 adjustable volume levels.
- Sensibilitat ajustable: 7 levels of sensitivity, ranging from a gentle touch to a strong impact, allowing customization based on your security needs.
- Comandament a distància sense fil: Control the alarm wirelessly with a remote offering a strong range of up to 260 feet. Includes vehicle search function and 3 selectable ringtones.
- Impermeable IP65: Designed for outdoor use, resistant to water splashes and dust.
- Aplicació multipropòsit: Suitable for bikes, electric bikes, motorcycles, mopeds, scooters, cars, trailers, luggage, doors, and windows.
- Sistema ampliable: Can add up to 8 remote controls and multiple alarm units.
Image: Illustration of the 110dB loud alarm feature, depicting its effectiveness in deterring theft.
Image: The alarm unit shown with water droplets, highlighting its IP65 waterproof design suitable for outdoor conditions.
3. Contingut del paquet
The WSDCAM USB Rechargeable Bike Alarm package includes:
- 1 x WSDCAM Alarm Unit
- 1 x comandament a distància
- 1 x cable de càrrega USB-C
- 1 x Suport de muntatge
- 2 x lligadures de cable
- 2 x Double-sided Adhesive Tapes
- 1 x Manual d'usuari (aquest document)
4. Configuració i instal·lació
L'alarma WSDCAM ofereix tres mètodes d'instal·lació principals per adaptar-se a diverses superfícies i preferències de muntatge:
- Instal·lació del suport:
This method is ideal for handlebars, seat posts, or other cylindrical structures. It allows for convenient repositioning.
- Fixeu el suport de muntatge a la ubicació desitjada amb els cargols proporcionats. Assegureu-vos que estigui ben fixat.
- Alineeu els forats dels cargols de la unitat d'alarma amb el suport.
- Turn and lock the alarm unit onto the bracket.
- Tighten the included screw to secure the alarm to the bracket.
Image: Detailed steps for installing the alarm using the mounting bracket.
- Instal·lació de llaços de cremallera:
Suitable for irregular mounting objects or areas where a bracket is not feasible.
- Col·loqueu la unitat d'alarma a la superfície desitjada.
- Passeu les brides de cable proporcionades per les ranures designades de la unitat d'alarma i al voltant de l'objecte de muntatge.
- Pull the zip ties tight to secure the alarm firmly in place. Trim any excess tie length.
- Instal·lació de cinta de doble cara:
Best for flat, clean surfaces where a discreet installation is preferred.
- Netegeu a fons la superfície de muntatge per assegurar-vos que estigui lliure de pols i greix.
- Peel off the protective backing from one side of the double-sided adhesive tape and apply it to the back of the alarm unit.
- Peel off the remaining backing and firmly press the alarm unit onto the desired surface for at least 30 seconds.
Image: Visual representation of the three available installation methods for the alarm.
5. Instruccions de funcionament
The alarm is controlled via the wireless remote. Familiarize yourself with the remote's buttons:
- Botó de bloqueig (🔒): Press once to arm the alarm. The alarm will emit a confirmation sound. Any vibration detected will trigger the alarm.
- Botó de desbloqueig (🔓): Press once to disarm the alarm. The alarm will emit a confirmation sound.
- Lightning Bolt Button (⚡): Press to activate the vehicle search function. The alarm will sound, helping you locate your vehicle in a parking area.
- Bell Button (🔔): Press to cycle through the 3 available ringtones for the alarm.
Image: The remote control with its functions labeled, demonstrating its effective range for locating your bike.
6. Adjusting Settings (Volume & Sensitivity)
The WSDCAM alarm allows you to customize its volume and sensitivity levels.
6.1. Ajust de volum
The alarm has 3 adjustable volume levels (Low, Medium, High).
Image: Visual representation of the three adjustable volume levels.
6.2. Adjusting Sensitivity
The alarm has 7 adjustable sensitivity levels, from a gentle touch (level 1) to a strong push/beat (level 7).
Image: Visual representation of the seven adjustable sensitivity levels.
6.3. How to Change Settings
To enter setting mode and adjust volume or sensitivity:
- Assegureu-vos que l'alarma estigui desarmada.
- Manteniu premut el botó Botó de desbloqueig (🔓) al comandament.
- Continue holding the Unlock Button until the remote's indicator light turns off, then turns back on again. This indicates you are in setting mode.
- Release the Unlock Button.
- Per ajustar Volum: Premeu el botó Bell Button (🔔) repeatedly to cycle through the 3 volume levels. The alarm will sound at the current level.
- Per ajustar Sensibilitat: Premeu el botó Lightning Bolt Button (⚡) repeatedly to cycle through the 7 sensitivity levels. The alarm will emit a corresponding number of beeps (1 beep for level 1, 7 beeps for level 7).
- Once you have selected your desired setting, wait a few seconds. The alarm will automatically exit setting mode, and your changes will be saved.
7. Charging the Alarm
The WSDCAM alarm is equipped with a rechargeable lithium battery. When the battery is low, the alarm may indicate this with a specific sound or reduced performance.
- Connect the provided USB-C charging cable to the alarm unit's charging port.
- Connect the other end of the USB-C cable to a DC5V power adapter (not included) or a USB port on a computer.
- A charging indicator light on the alarm unit will illuminate during charging.
- A full charge typically takes about 3 hours. The indicator light may change or turn off when fully charged (refer to specific product behavior if different).
- Once fully charged, the alarm can operate for approximately 1 to 3 months, with a standby time of up to 6 months, depending on usage frequency.
Image: The alarm unit connected to a charger, illustrating its long battery life and charging indicator.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Alarm not responding to remote. | Low battery in alarm unit or remote. Out of range. Interference. | Charge the alarm unit. Replace remote battery (if applicable). Move closer to the alarm. Avoid strong electromagnetic interference. |
| Alarm not loud enough. | Volume set to low. Obstruction. | Adjust volume to a higher level (refer to Section 6.1). Ensure alarm speaker is not blocked. |
| Alarm too sensitive or not sensitive enough. | Sensitivity level incorrectly set. | Adjust sensitivity level (refer to Section 6.2). |
| Alarm not charging. | Faulty cable or power adapter. Charging port issue. | Try a different USB-C cable and power adapter. Ensure the charging port is clean and undamaged. |
| Cannot change settings (volume/sensitivity). | Incorrect procedure for entering setting mode. | Follow the exact steps in Section 6.3: Hold Unlock button until remote light turns off then back on, then release. Then press Bell for volume or Lightning Bolt for sensitivity. |
9. Especificacions
| Número de model | SUVELAM (WSDKS-SF32R) |
| Marca | WSDCAM |
| Dimensions | 1.77 x 1.77 x 1.38 polzades |
| Pes de l'article | 5.9 unces |
| Bateria | 4.2V 700mAh Lithium Polymer (Rechargeable) |
| Vol. De càrregatage | DC 5V |
| Volum de l'alarma | Up to 110dB (3 levels adjustable) |
| Sensibilitat | 7 nivells regulables |
| Distància remota | Fins a 260 peus (80 metres) |
| Classificació impermeable | IP65 |
10. Garantia i Suport
WSDCAM products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please contact WSDCAM customer service through the platform where you purchased the product or visit the official WSDCAM store on Amazon:
Visit the WSDCAM Store on Amazon
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
