RunCam Falcon Nano Digital FPV Camera Kit

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your RunCam Falcon Nano Digital FPV Camera Kit. This kit is designed for use with FPV (First Person View) drones, offering high-definition video transmission and a compact form factor. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Producte acabatview

The RunCam Falcon Nano Digital FPV Camera Kit includes the Falcon Nano Camera and the Digital Vista FPV Transmitter. This system is engineered for optimal performance in FPV applications, providing clear visuals and reliable signal transmission.

Image: The RunCam Link Digital FPV Air Unit with Falcon Nano Camera, highlighting its compact design for FPV drones.

Característiques principals:

• 1080p120fps & Low-light Performance: Provides 28ms low latency mode with 1080p image capture and 720p output, ensuring clear image quality even in challenging light conditions.
• Disseny compacte: With dimensions of 14x16mm and a weight of only 23.5g, this kit is suitable for a wide range of drones.
• 4:3 Ratio Sensor: The original 4:3 ratio sensor output is optimized for FPV racing, enhancing the pilot's flight experience.
• Smooth and Ultra HD Video: Supports 16:9/4:3 image switching and 720p120fps. Power settings can be adjusted (25mW/200mW/500mW/700mW) for DJI goggles, providing superior video quality compared to analog systems.
• Multi-Drone Operation: The HDL FPV Transmission system and FPV Air Unit feature eight frequency channels, allowing up to eight drones to fly simultaneously with exclusive channels to reduce interference.
• Embedded Remote Controller Receiver: Users can wirelessly connect their DJI FPV Air Unit to the DJI FPV Remote Controller without additional receivers, reducing flight preparation time.

Image: The RunCam Falcon Nano kit shown alongside a DJI FPV Remote Controller, illustrating its integrated receiver capability.

Imatge: Una imatge detallada view of the RunCam Falcon Nano Camera's native 1080P 120FPS 4:3 sensor, capable of low latency as low as 28ms.

3. Configuració

Before initial use, ensure all components are present as indicated in the package contents. The RunCam Falcon Nano Digital FPV Camera Kit is designed for integration with FPV drones and DJI systems.

Contingut del paquet:

Image: Illustration of the RunCam Falcon Nano kit's package contents, including the LINK Air Unit & Falcon Nano Camera, IPEX Antenna, JST SH 1.0 6pin Cable, and Manual Guide.

• 1 x LINK Air Unit & Falcon Nano Camera
• 1 x IPEX Antenna
• 1 x JST SH 1.0 6pin Cable
• 1 x Manual Guide (this document)

Connexió i configuració:

1. Connect the Falcon Nano Camera to the Digital Vista FPV Transmitter using the provided cable.
2. Mount the camera and transmitter securely on your FPV drone, ensuring proper ventilation for the transmitter.
3. Connect the power cable from the transmitter to your drone's power distribution board (PDB) or flight controller, adhering to voltage especificacions.
4. Attach the IPEX antenna to the transmitter.
5. For initial setup and firmware updates, connect the FPV Air Unit to your computer using a USB cable. Ensure you use DJI Assistant 2 FPV software for proper recognition and configuration. Standard DJI Assistant 2 may not recognize the device.
6. Pair the FPV Air Unit with your DJI FPV Goggles and DJI FPV Remote Controller according to DJI's pairing instructions.

4. Instruccions de funcionament

Once the RunCam Falcon Nano Digital FPV Camera Kit is properly installed and configured, you can begin operation.

Transmissió de vídeo:

• The system provides 1080p video capture at 120 frames per second (fps) with a low latency of 28ms.
• Output resolution to your FPV goggles is 720p.
• Switch between 16:9 and 4:3 aspect ratios as preferred for your flight experience. The 4:3 ratio is native to the sensor and often preferred for FPV racing.

Configuració d'energia:

Adjust the video transmission power (VTX power) through your DJI FPV Goggles settings. Available power options include 25mW, 200mW, 500mW, and 700mW. Higher power settings generally provide greater range and penetration but consume more power and may generate more heat.

DJI FPV Goggles Settings Menu:

The RunCam Falcon Nano supports the DJI FPV Goggles setting menu, allowing pilots to adjust various camera parameters such as brightness and saturation directly through their goggles. This enables optimization of the video feed for different lighting conditions and flight environments.

Image: A representation of the DJI FPV Goggles setting menu, showing options for ratio, scene, EV, saturation, WB, AWB, and rotate, which can be adjusted by pilots.

Multi-Drone Operation:

The system's eight frequency channels allow for simultaneous operation of up to eight drones. Ensure each drone is set to a unique channel to prevent cross-interference and ensure an optimal racing or flying experience.

5. Manteniment

Proper maintenance ensures the longevity and optimal performance of your RunCam Falcon Nano Digital FPV Camera Kit.

• Neteja: Gently clean the camera lens with a microfiber cloth designed for optics. Avoid abrasive materials or harsh chemicals. Keep the transmitter free from dust and debris.
• Emmagatzematge: Store the kit in a dry, cool environment, away from direct sunlight and extreme temperatures.
• Inspecció del cable: Periodically inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical issues.
• Actualitzacions de firmware: Regularly check the RunCam official website for firmware updates. Keeping your device's firmware up-to-date can improve performance, add features, and resolve bugs.

6. Solució De Problemes

If you encounter issues with your RunCam Falcon Nano Digital FPV Camera Kit, refer to the following common problems and solutions:

If you experience issues not covered here, please refer to the support section.

7. Especificacions

Detailed technical specifications for the RunCam Falcon Nano Digital FPV Camera Kit:

Image: Detailed dimensions of the RunCam Falcon Nano camera, including its 10.5mm depth, 16mm height, 14mm width, M8 lens, and M2 screw compatibility.

8. Informació de la garantia

Specific warranty terms and conditions for the RunCam Falcon Nano Digital FPV Camera Kit are provided by the manufacturer, RunCam. Please refer to the warranty card included with your product or visit the official RunCam website for detailed warranty policy information, including coverage period and claim procedures. Retain your proof of purchase for warranty claims.

9. Suport

For further assistance, technical support, or inquiries regarding your RunCam Falcon Nano Digital FPV Camera Kit, please contact RunCam customer support through their official channels.

• RunCam Official Weblloc: Visita www.runcam.com per obtenir informació sobre el producte, preguntes freqüents i recursos d'assistència.
• Botiga de la marca Amazon: You can also find more information and contact options via the official RunCam store on Amazon: RunCam Amazon Store.