1. Producte acabatview
The INGCO HVLP Spray Gun ASG1061 is designed for efficient and precise paint application. Utilizing High Volume Low Pressure (HVLP) technology, it ensures a high transfer efficiency of coating materials, reducing overspray and material waste. This spray gun is suitable for various applications, including auto refinishing, industrial painting, woodworking, and household projects.
Image 1: INGCO HVLP Spray Gun ASG1061 with its 600cc paint cup and product packaging.
2. Instruccions de seguretat
Always observe the following safety precautions when operating the INGCO HVLP Spray Gun ASG1061 to prevent injury or damage.
- Llegeix el manual: Familiaritzeu-vos amb totes les instruccions i advertències abans d'utilitzar-lo.
- Equips de protecció individual (EPI): Always wear appropriate PPE, including safety glasses, gloves, and a respirator, especially when spraying paints or chemicals.
- Ventilació: Use the spray gun in a well-ventilated area to avoid inhaling fumes.
- Materials inflamables: Do not spray flammable materials near open flames, pilot lights, or other ignition sources. Ensure the work area is free of sparks.
- Seguretat elèctrica: Ensure all electrical connections are secure and grounded. Do not operate the spray gun in wet conditions.
- Pressió: Never exceed the maximum recommended working pressure of 3.5 bar.
- Infants i espectadors: Mantenir els nens i els espectadors allunyats de la zona d'operacions.
- Manteniment: Disconnect the air supply before performing any maintenance or cleaning.
3. Llista de components i peces
The INGCO HVLP Spray Gun ASG1061 package includes the following components:
- Aluminum spray gun body (1 unit)
- 1.4mm standard nozzle (1 unit, pre-installed)
- 600ml plastic paint cup (1 unit)
- Connectors (4 units)
Note: Additional machinery to blow air (e.g., air compressor) is required and not included. Optional nozzles (1.3-2.5mm) are also not included.
Image 2: The INGCO HVLP Spray Gun ASG1061 showing its main components.
4. Instruccions de configuració
Follow these steps to prepare your spray gun for use:
- Desembalatge i inspecció: Traieu amb cura tots els components de l'embalatge. Inspeccioneu-ho per veure si hi ha algun dany.
- Instal·lació de broquets: The 1.4mm nozzle is pre-installed. If using an optional nozzle (not included), ensure it is securely fastened.
- Attach Paint Cup: Securely screw the 600ml plastic paint cup onto the top of the spray gun body.
- Connecteu el subministrament d'aire: Attach the appropriate connector to the air inlet of the spray gun. Connect the air hose from your air compressor (not included) to this connector. Ensure all connections are tight to prevent air leaks.
- Preparació de la pintura: Mix and thin your paint according to the paint manufacturer's instructions. Strain the paint to remove any particles that could clog the nozzle. Fill the paint cup with the prepared paint.
5. Instruccions de funcionament
The INGCO HVLP Spray Gun ASG1061 features three adjustable knobs for precise control:
- Fluid Control Knob (Needle Adjust): Regulates the amount of paint sprayed. Turn clockwise for less paint, counter-clockwise for more.
- Pattern Control Knob: Adjusts the fan pattern size from a round spot to a wide fan.
- Air Adjustment Valve: Provides versatility to adjust the airflow to the spray gun.
Passos de funcionament:
- Set Air Pressure: Ensure your air compressor is set to deliver air within the recommended range. The maximum working pressure for this spray gun is 3.5 bar. Recommended air consumption is 4.2-7.1 cfm (119-200 l/min).
- Ajustar la configuració: Begin with the fluid control knob slightly open, the pattern control set to a medium fan, and the air adjustment valve fully open. Test on a scrap piece of material to fine-tune the settings.
- Tècnica de polvorització: Hold the spray gun perpendicular to the surface, maintaining a consistent distance (typically 6-8 inches). Move the gun at a steady pace, overlapping each pass by about 50%. Release the trigger at the end of each pass.
- Aplicació: The 1.4mm nozzle is ideal for basecoats and general purposes. For primers, optional 1.3-2.5mm nozzles can be used (not included). This gun is applicable for industrial, boats and ships, woodworking, household appliances, leather, plastic material, furniture, and construction.
6. Manteniment
Un manteniment adequat garanteix la longevitat i el rendiment òptim de la pistola polvoritzadora.
- Neteja després de cada ús: Immediately after each use, empty any remaining paint from the cup. Fill the cup with an appropriate cleaning solvent (compatible with your paint type) and spray it through the gun until clear solvent emerges.
- Desmuntar i netejar: Disassemble the air cap, fluid nozzle, and needle. Clean these components thoroughly with a brush and solvent. Pay close attention to small holes and passages.
- Lubricació: Apply a small amount of lubricant (e.g., petroleum jelly or spray gun lubricant) to the needle packing and air valve packing as needed.
- Emmagatzematge: Store the clean and dry spray gun in a safe, dry place.
7. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Patró de polvorització desigual | Clogged air cap or fluid nozzle; incorrect pressure; improper technique. | Clean air cap and nozzle; adjust air pressure; review spraying technique. |
| Sense flux de pintura | Clogged nozzle; fluid control closed; paint too thick; no air supply. | Clean nozzle; open fluid control; thin paint; check air connection. |
| Excés de polvorització | Too much air pressure; gun too far from surface; paint too thin. | Reduce air pressure; move gun closer; thicken paint or adjust fluid. |
| Leaking from nozzle | Loose nozzle; damaged needle packing; worn fluid needle. | Tighten nozzle; replace needle packing or fluid needle. |
8. Especificacions
Key technical specifications for the INGCO HVLP Spray Gun ASG1061:
- Marca: Ingco
- Nom del model: ASG1061
- Volum del tanc: 600 mil·lilitres
- Broquet estàndard: 1.4mm (pre-installed)
- Optional Nozzles: 1.3-2.5mm (not included)
- Pressió màxima: 3.5 barres
- Consum d'aire: 4.2-7.1 cfm (119-200 l/min)
- Pattern Width: 180-250 mm
- Material: Acrilonitril butadiè estirè (ABS), acer inoxidable
- Pes de l'article: 350 grams
- Dimensions del producte: 12.8 x 15.4 x 23.4 cm
- Font d'alimentació: Air Power (requires external compressor)
Image 3: INGCO HVLP Spray Gun ASG1061 highlighting key specifications like 600cc, HVLP, 1.4mm nozzle, and 180-250mm pattern width.
9. Garantia i Suport
For warranty information and customer support, please refer to the documentation provided with your purchase or contact INGCO customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
