Manual d'usuari del bolígraf KINGONE Stylus Pen KO-A1

1. Producte acabatview

The KINGONE Stylus Pen KO-A1 is a digital pencil designed for use with compatible iPad models from 2018 and later. It features palm rejection, tilt sensitivity, and a magnetic design for enhanced user experience.

The KINGONE Stylus Pen, shown in white, accompanied by three replacement pen tips and a USB-C charging cable.

Contingut del paquet:

• KINGONE Stylus Pen KO-A1
• Cable de càrrega USB-C
• Replacement Pen Tips (3 pieces)
• Manual d'usuari

2. Configuració i compatibilitat

Comprovació de compatibilitat:

The KINGONE Stylus Pen KO-A1 is compatible with specific iPad models released in 2018 and later. Please verify your iPad model number before use. This pen is no compatible with iPad Pro 10.5", iPad Pro 9.7", iPhone, Android, Microsoft devices, or iPad models released before 2018.

A detailed compatibility chart for the KINGONE Stylus Pen, specifying compatible iPad Pro 11/12.9 inch (2018-2021), iPad (6th/7th/8th/9th gen), iPad Air (3rd/4th gen), and iPad Mini (5th gen) models by their model numbers. It also explicitly lists devices that are not compatible, such as older iPads, iPhones, Android, and Microsoft devices.

Càrrega inicial:

1. Connect the provided USB-C charging cable to the charging port on the stylus.
2. Connecteu l'altre extrem del cable a un adaptador de corrent USB (no inclòs) o al port USB d'un ordinador.
3. The indicator light will show charging status. A full charge typically takes approximately 1 hour.

Encès/apagat:

• To turn on the stylus, gently tap the top end of the pen. The indicator light will illuminate blue.
• To turn off the stylus, gently tap the top end of the pen again. The indicator light will turn off.
• The stylus will automatically power off after a period of inactivity to conserve battery.

This image illustrates the key features of the KINGONE Stylus Pen, including its touch control for power, USB-C charging port, indicator light, aluminum alloy construction, and 1.2mm fine tip. It also provides visual instructions for replacing the pen tip and turning the device on/off.

3. Instruccions de funcionament

Ús bàsic:

Once powered on and compatible with your iPad, the stylus is ready for use. Simply touch the pen tip to the iPad screen to write, draw, or navigate. No Bluetooth pairing is required.

Rebuig de la palma:

The stylus features integrated palm rejection technology. This allows you to rest your hand naturally on the iPad screen while writing or drawing without causing unintended marks. Ensure your iPad's 'Only Draw with Apple Pencil' setting (if applicable) is enabled for optimal performance.

A visual comparison demonstrating the KINGONE Stylus Pen's palm rejection technology. The left side shows a hand resting naturally on an iPad screen while drawing with the KINGONE pen, with only the pen input registered. The right side shows a generic stylus where the resting palm causes unintended marks.

Sensibilitat a la inclinació:

The stylus supports tilt sensitivity, allowing you to vary line thickness by changing the angle at which you hold the pen against the screen. This feature is useful for shading and artistic effects in compatible applications.

This diagram explains the tilt sensitivity feature of the KINGONE Stylus Pen. It shows the pen at various angles (60°, 30°, and 15° relative to the screen) and how these angles correspond to different line thicknesses, allowing for dynamic drawing and shading.

Absorció magnètica:

The KINGONE Stylus Pen features a magnetic design, allowing it to attach to the side of compatible iPad models for convenient storage. Please note that this magnetic attachment does not provide wireless charging functionality.

An image depicting the magnetic absorption feature of the KINGONE Stylus Pen, showing it securely attached to the side of a compatible iPad model for convenient storage.

4. Manteniment

Càrrega:

Recharge the stylus when the indicator light flashes, indicating low battery. Use the provided USB-C cable for charging. Avoid using damaged cables or non-standard chargers.

Replacing Pen Tips:

Over time, the pen tip may wear down. To replace it:

1. Gently twist the existing pen tip counter-clockwise to remove it.
2. Select a new replacement tip from the package.
3. Align the new tip with the stylus and twist it clockwise until it is securely fastened. Do not overtighten.

Neteja:

Wipe the stylus body with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials. Keep the charging port free of dust and debris.

5. Solució De Problemes

• Stylus not turning on: Ensure the stylus is charged. Tap the top end firmly to activate.
• Stylus not responding on iPad:
  • Verify your iPad model is compatible (refer to Section 2).
  • Ensure the stylus is powered on (blue indicator light).
  • Check if your iPad's Bluetooth is turned off (if you previously paired an Apple Pencil, ensure it's disconnected).
  • Reinicieu el vostre iPad.
  • Ensure the pen tip is securely attached and not worn out.
• Connexió amb retard o intermitent:
  • Ensure your iPad's operating system is up to date.
  • Close other applications running in the background on your iPad.
  • Recharge the stylus if the battery is low.
• Significats de la llum indicadora:
  • Blau: Stylus is on and operating.
  • Vermell (parpellejant): Bateria baixa.
  • Vermell (sòlid): Carregant.
  • Verd (sòlid): Totalment carregat.

6. Especificacions

7. Garantia i Suport

Informació de la garantia:

KINGONE products are manufactured with quality and care. For specific warranty terms and conditions, please refer to the product packaging or contact KINGONE customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

Atenció al client:

If you encounter any issues or have questions regarding your KINGONE Stylus Pen KO-A1, please contact KINGONE customer support through the retailer's platform or the official KINGONE website. Provide your product model number (KO-A1) and a detailed description of the issue for efficient assistance.