Digitus DN-10130-1

DIGITUS Gigabit Ethernet Network Card User Manual

Model: DN-10130-1

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DIGITUS Gigabit Ethernet Network Card. This PCI Express network card is designed to equip your PC with an additional Gigabit Ethernet port, enabling high-speed data transfer up to 1000 Mbps over existing network cabling. It includes a low-profile slot panel, making it suitable for various computer chassis sizes.

DIGITUS Gigabit Ethernet Network Card

Figure 1: DIGITUS Gigabit Ethernet Network Card (Main View)
This image shows the overall view of the DIGITUS Gigabit Ethernet Network Card, highlighting its PCI Express interface and the RJ45 port.

Contingut del paquet

Abans de continuar amb la instal·lació, comproveu que tots els components siguin presents al paquet:

DIGITUS Network Card with Low Profile Suport

Figure 2: Network Card with Included Low Profile Suport
This image displays the network card alongside the additional low-profile bracket, which can be used for installation in smaller computer cases.

Configuració i instal·lació

Follow these steps carefully to install your network card:

  1. Apagueu i desconnecteu: Apagueu completament l'ordinador i desconnecteu el cable d'alimentació de la presa de corrent.
  2. Caixa d'ordinador oberta: Traieu el panell lateral de la caixa de l'ordinador per accedir a la placa base.
  3. Localitza la ranura PCI Express: Identify an available PCI Express (PCIe) slot on your motherboard. The card requires a PCIe x1 slot or larger (e.g., x4, x8, x16).
  4. Treure la coberta de la ranura: Carefully remove the metal slot cover from the back of your computer case corresponding to the chosen PCIe slot. If installing in a small form factor PC, you may need to replace the standard bracket on the network card with the included low-profile mènsula.
  5. Insert Network Card: Align the network card with the PCIe slot and press it firmly and evenly until it is securely seated. Ensure the bracket is flush with the back of the case.
  6. Targeta segura: Secure the network card with the screw or latch mechanism provided by your computer case.
  7. Tanca el cas i torna a connectar: Replace the computer case side panel and reconnect all cables, including the power cable.
  8. Engegar i instal·lar els controladors: Power on your computer. Once the operating system loads, insert the provided Support CD-ROM to install the necessary drivers. Alternatively, you can download the latest drivers from the Digitus official weblloc. Seguiu les instruccions que apareixen a la pantalla per completar la instal·lació del controlador.
PCIe Connector of Network Card

Figure 3: PCIe Connector Detail
Aquesta imatge ofereix un primer pla view of the PCI Express connector on the network card, which plugs into the motherboard.

Instruccions de funcionament

Once the network card is physically installed and drivers are successfully loaded, you can begin using it:

  1. Connecteu el cable Ethernet: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the newly installed network card.
  2. Verifica la connexió: Observe the LED indicators on the RJ45 port. Typically, one LED indicates link activity (data transfer) and the other indicates connection speed (e.g., green for Gigabit, amber for 100 Mbps). Refer to the image below for LED locations.
  3. Configuració de la xarxa: Your operating system should automatically detect the new network connection. You may need to configure network settings (e.g., IP address, DNS) if your network does not use DHCP.
  4. Prova de connectivitat: Obre a web browser or use network diagnostic tools to confirm internet access and network connectivity.
RJ45 Port and LED Indicators

Figure 4: RJ45 Port with LED Indicators
This image shows the RJ45 Ethernet port on the network card, along with the two LED indicators that provide visual feedback on network link status and activity.

Manteniment

The DIGITUS Gigabit Ethernet Network Card is designed for reliable operation with minimal maintenance. However, consider the following:

Resolució de problemes

If you encounter issues with your network card, refer to the following troubleshooting tips:

Especificacions

CaracterísticaDetall
MarcaDígits
Número de modelDN-10130-1
Interfície del maquinariPCI Express (PCIe x1), Ethernet
Protocol d'enllaç de dadesGigabit Ethernet (10/100/1000 Mbps)
Velocitat de transferència de dades1000 megabits per segon
Dispositius compatiblesOrdinadors d'escriptori
ChipsetRealtek RTL8111H
Dimensions del producte5.51 x 7.87 x 1.38 polzades
Pes de l'article0.035 unces (aprox. 1 grams)
ColorNegre

Garantia i Suport

DIGITUS products are designed for quality and reliability. This product comes with a standard limited warranty. Please refer to the warranty information provided on the Support CD-ROM or the official Digitus weblloc per a termes i condicions específiques.

For technical support, driver downloads, or further assistance, please visit the official Digitus support website or refer to the contact information provided in the Quick Start Guide included with your product. The included Support CD-ROM also contains drivers and additional resources.

EU Spare Part Availability Duration: 1 Year

Documents relacionats - DN-10130-1

Preview Targeta de xarxa DIGITUS Gigabit Ethernet RJ45 PCI Express - DN-10130-1
Informació sobre la targeta de xarxa Gigabit Ethernet DIGITUS, model DN-10130-1. Inclou notes de seguretat per a la instal·lació i detalls de la persona responsable de la UE.
Preview Targeta de xarxa PCI Express Gigabit Ethernet DIGITUS - DN-10130-1
Informació sobre la targeta de xarxa PCI Express Gigabit Ethernet de DIGITUS, model DN-10130-1. Inclou notes de seguretat per a la instal·lació i la manipulació.
Preview DIGITUS SNMP i Web Manual d'usuari de targetes per a sistemes UPS en línia
Aquest manual d'usuari proporciona instruccions completes per al DIGITUS SNMP i Web Targeta (DN-170100-1), dissenyada per a sistemes UPS Digitus Online (DN-170093-96, DN-170106-07, DN-170130-32). Més informació sobre la instal·lació, la configuració, web monitorització i gestió de programari per a un control millorat del SAI i el registre de dades.
Preview DIGITUS SNMP i Web Targeta per a sistemes UPS en línia: Guia d'instal·lació ràpida
Guia d'instal·lació ràpida per a DIGITUS SNMP i Web Targeta (DN-170100-1) dissenyada per a sistemes UPS en línia DIGITUS. Aprèn sobre les característiques, les funcions, la instal·lació i web inici de sessió.
Preview Manual d'usuari del commutador Gigabit Ethernet gestionat de 8 ports DIGITUS | DN-651123, DN-651125
Manual d'usuari complet per al commutador Gigabit Ethernet gestionat de 8 ports DIGITUS (models DN-651123 i DN-651125). Informació sobre les característiques, les especificacions, la instal·lació i la configuració de xarxa del producte.
Preview Commutador Ethernet ràpid industrial de 4 ports DIGITUS: guia de seguretat i funcionament
Notes de seguretat essencials i instruccions d'ús per al commutador de xarxa Ethernet ràpid de 4 ports DIGITUS (DN-651130), un commutador industrial no gestionat amb 1 enllaç ascendent SFP FE.