Manual d'instruccions del tocadiscs d'alt parell amb transmissió directa Reloop RP-7000 MK2

1. Introducció

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Instruccions de seguretat

• Font d'alimentació: Connecteu la unitat només a una presa de corrent altern del volum especificat.tage. Assegureu-vos que el cable d'alimentació no estigui malmès ni pinçat.
• Humitat: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Ventilació: Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat. No bloquegeu les obertures de ventilació.
• Col·locació: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• Neteja: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or solvents.
• Manteniment: No intenteu fer el manteniment de la unitat vosaltres mateixos. Encarregueu totes les tasques de manteniment a personal qualificat.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet. Si falta algun element o està malmès, poseu-vos en contacte amb el vostre distribuïdor immediatament.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Dust Cover (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Cable d'alimentació
• Cable RCA
• Cable de terra
• Slipmat
• Contrapès
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Figura 1: Acabatview of the Reloop RP-7000 MK2 turntable bundle components.

4. Configuració

4.1 Desembalatge i col·locació

1. Carefully remove all components from the packaging. Retain packaging for future transport.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Figura 2: Turntable with the dust cover in place.

4.2 Platter and Slipmat Installation

1. Carefully place the platter onto the center spindle. Ensure it sits flush.
2. Col·loca el slipmat a sobre del plat.

4.3 Configuració del braç i el cartutx

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Screw the counterweight onto the rear of the tonearm.
3. Equilibrar el braç: Deixeu anar el braç clamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. Estableix la força de seguiment: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Estableix l'antipatinatge: Ajusteu el dial antipatinatge perquè coincideixi amb la configuració de la força de seguiment.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Enceneu la bàscula amb el botó d'encesa.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Figura 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Connexions

1. Sortida d'àudio: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preampmés viu.
2. Cable de terra: Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to reduce hum.
3. Potència: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Instruccions de funcionament

5.1 Reproducció bàsica

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Premeu el botó INICI/PARA button to begin platter rotation.
4. Carefully lift the tonearm using the cueing lever and position the stylus over the desired groove on the record.
5. Lower the cueing lever to gently place the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the INICI/PARA botó.

Figura 4: Turntable platter and control layout.

5.2 Pitch Control

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Reverse Function

The RP-7000 MK2 features a reverse playback function. Press the INVERSA button to change the direction of platter rotation. Press it again to return to normal playback.

6. Manteniment

6.1 Neteja del plat giratori

• Desconnecteu sempre l'alimentació abans de netejar.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Eviteu utilitzar netejadors abrasius, dissolvents o esprais químics, ja que poden danyar l'acabat.

6.2 Cura del llapis òptic

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Eviteu tocar el llapis amb els dits.

6.3 Cura de registres

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Deixeu que el disc s'assequi completament abans de reproduir-lo.

Figura 5: Record Care Solution for maintaining vinyl quality.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Fabricant: Reloop

Data de primera disponibilitat: 8 de juliol de 2022