Manual d'usuari del router Wi-Fi portàtil de 12/230 volts TELECO WFT402 per a targeta SIM

1. Producte acabatview

The TELECO WFT402 is a versatile portable Wi-Fi router designed to provide internet connectivity using a SIM card. It supports GSM, 3G, 4G, and LTE signals, converting them into a Wi-Fi hotspot with a coverage area of approximately 30 square meters. This device is ideal for mobile environments such as cars, campers, boats, or small offices, thanks to its flexible power options (12V DC and 230V AC).

The WFT402 is a Category 4 router capable of supporting up to 4 devices simultaneously, including smartphones, tablets, smart TVs, and other Wi-Fi enabled peripherals. It features an internal antenna for good signal reception and includes two SMA ports for connecting external antennas to enhance signal strength.

Imatge 1.1: Frontal view of the TELECO WFT402 Portable Wi-Fi Router, showing LED indicators for system status, network, signal strength, SIM, Wi-Fi, WPS, Ethernet, and 4G connectivity.

Image 1.2: Illustration of the TELECO WFT402 router installed in a camper, demonstrating its Wi-Fi signal coverage for mobile use.

2. Instruccions de configuració

2.1. Contingut del paquet

Abans de continuar, assegureu-vos que hi hagi tots els components:

• TELECO WFT402 Wi-Fi Router
• Power Adapter (for 230V AC)
• (Optional) 12V DC Power Cable (may be included or sold separately for vehicle use)
• Manual d'usuari (aquest document)

2.2. Instal·lació de la targeta SIM

1. Assegureu-vos que l'encaminador estigui apagat.
2. Locate the SIM card slot, typically on the side or back of the device. The WFT402 uses a 2FF SIM card (standard size).
3. Insert your activated 3V or 1.8V SIM card into the push-push slot until it clicks into place. Ensure correct orientation as indicated on the device.

2.3. Connexió d'alimentació

The WFT402 router supports two power input methods:

• 230V AC Power: Connect the provided power adapter to the router's DC 12V/1A input port and then plug it into a standard wall outlet.
• Alimentació de 12 V CC: For mobile applications (e.g., in vehicles), connect a compatible 12V DC power cable (not always included) to the router's DC 12V/1A input port.

Imatge 2.1: Detallada view of the router's rear panel, highlighting the WAN/LAN port, ON/OFF switch, and DC 12V power input.

2.4. External Antenna Connection (Optional)

The router is equipped with an internal antenna. For improved signal reception, especially in areas with weak cellular coverage, you can connect one or two external antennas:

1. Locate the two SMA connectors on the back of the router.
2. Carefully screw the external antenna(s) onto the SMA connectors until secure.
3. Position the external antenna(s) for optimal signal reception.

Imatge 2.2: posterior view of the router, illustrating the SMA ports for connecting optional external antennas.

3. Funcionament

3.1. Encès / apagat

• Per encendre: Press the "ON/OFF" button located on the rear panel. The LED indicators on the front will illuminate.
• Per apagar: Press and hold the "ON/OFF" button until the LED indicators turn off.

3.2. Indicadors LED

The front panel features several LED indicators to show the router's status:

• SYS: Indicador d'estat del sistema.
• NET: Network activity indicator.
• RF: Radio Frequency signal strength (multiple bars).
• SIM: SIM card status.
• WIFI: Wi-Fi network status.
• WPS: Wi-Fi Protected Setup status.
• ETH1: Ethernet port status.
• 4G: 4G LTE connectivity status.

3.3. Connexió de dispositius mitjançant Wi-Fi

1. Ensure the router is powered on and the WIFI LED is active.
2. Al dispositiu (telèfon intel·ligent, tauleta, ordinador portàtil), cerca les xarxes Wi-Fi disponibles.
3. Select the Wi-Fi network name (SSID) broadcast by the WFT402 (usually found on a label on the router).
4. Enter the Wi-Fi password (also found on the router's label) when prompted.
5. El dispositiu ara hauria d'estar connectat a Internet.

3.4. Using the WPS Function

WPS (Wi-Fi Protected Setup) allows for easy connection of compatible devices without manually entering the password:

1. Press the WPS button on the router (refer to the device layout for exact location). The WPS LED will start blinking.
2. Within two minutes, activate the WPS function on your client device.
3. Els dispositius es connectaran automàticament.

3.5. Accedint al Web Interfície

For advanced settings and configuration, you can access the router's webInterfície de gestió basada en:

1. Connect your computer to the router via Wi-Fi or an Ethernet cable (WAN/LAN port).
2. Obre a web browser and enter the router's default IP address (usually 192.168.1.1 or similar, check the router's label or manual for the exact address).
3. Enter the default username and password (also found on the router's label or in the quick start guide).
4. You can now configure settings such as Wi-Fi name, password, security protocols (OPEN/WPA-PSK/WPA2-PSK), firewall rules, and more.

4. Manteniment

4.1. Neteja

Per mantenir un rendiment i un aspecte òptims:

• Wipe the router's exterior with a soft, dry cloth.
• Avoid using liquid cleaners, aerosols, or abrasive materials.
• Ensure no dust accumulates in the ventilation openings.

4.2. Actualitzacions de programari

The WFT402 supports software updates via TR069 and local update methods. Regularly checking for and applying updates can improve performance, security, and add new features. Refer to the router's web interface or the manufacturer's weblloc web per als procediments d'actualització.

4.3. Reinicialització del dispositiu

If the router experiences issues or you wish to restore factory settings, you can perform a reset:

1. With the router powered on, locate the reset pinhole (often labeled "RST" or "Reset") on the rear panel.
2. Use a paperclip or a similar pointed object to press and hold the reset button for approximately 5-10 seconds.
3. Release the button when the LED indicators flash or the router restarts.
4. The router will revert to its factory default settings, and you will need to reconfigure it.

5. Solució De Problemes

• Sense connexió a Internet:
  • Comproveu si la targeta SIM està correctament inserida i activada.
  • Verify that the SIM LED is active and the 4G LED indicates a stable connection.
  • Ensure there is cellular signal in your location (check RF signal strength LEDs).
  • Reinicieu l'encaminador.
• Velocitat Wi-Fi lenta:
  • Check the cellular signal strength (RF LEDs). Weak signal will result in slower speeds.
  • Redueix la distància entre el dispositiu i el router.
  • Ensure no obstacles are blocking the Wi-Fi signal.
  • Consider connecting an external antenna for better reception.
  • Limit the number of connected devices if performance is critical.
• El router no s'encén:
  • Verify that the power adapter is securely connected to both the router and the power outlet.
  • Comproveu si la presa de corrent funciona.
  • Assegureu-vos que l'interruptor ON/OFF estigui a la posició 'ON'.
• No es pot connectar a Wi-Fi:
  • Comproveu dues vegades la contrasenya del Wi-Fi.
  • Ensure the WIFI LED is illuminated.
  • Prova de reiniciar tant el router com el dispositiu client.
  • If you recently changed Wi-Fi settings, try resetting the router to factory defaults (see Section 4.3).

6. Especificacions tècniques

7. Garantia i Suport

Information regarding spare parts availability and guaranteed software updates is not available in the provided product data. For specific warranty details, technical support, or inquiries about spare parts, please refer to the documentation included with your purchase or contact Teleco customer service directly.

You can typically find contact information for Teleco on their official weblloc web o a través del vostre distribuïdor.